Passive Components Sourcing
A fan is chosen by the airflow it delivers at the pressure the enclosure imposes, not by the free air figure on the front of the catalogue.
The range here runs from a 40 mm frame at 7 CFM to a 120 mm frame at 120 CFM, in 5, 12, 24 and 48 V, with ball, sleeve and vapo bearings.
Static pressure, noise and current are listed per part number, so the working point can be read against a filter and a louvre.
Sealed sleeve and IP rated versions cover dusty and washed down cabinets, with 70,000 hour L10 life at 40 C on the ball bearing parts.
Solder is chosen by alloy first, then by flux class, then by the form the process needs: wire for a hand joint, paste for a stencil, a preform for a seam.
SAC305 melts at 217 to 219 C and Sn63Pb37 at 183 C, and that 35 C gap is what a reflow profile and a hand iron are both built around.
Wire on this page runs from 0.015 in to 0.062 in with a 50, 58 or 66 core, in no clean, water soluble, RMA and RA fluxes.
Paste is Type 3 powder at 90 percent metal, with a stencil life of eight hours and a six month shelf life at 0 to 10 C.