48V to 12V 800W Isolated DC-DC Brick Converter PCBA 800 W telecom DC-DC brick PCBA: full bridge, synchronous rectification, planar transformer, 85.97 x 60.14 x 10.4 mm, built and tested to IPC-6012 Class 3.
Robot Docking and Charging Board PCBA for Autonomous Fleets Docking and charging board PCBA for autonomous robot fleets. Contact management, charge current control, temperature sensing, CAN reporting to the fleet.
Vision and CSI Camera Interface Board PCBA for Robots Camera interface board PCBA for robot vision: multiple MIPI CSI-2 ports, impedance controlled pairs, filtered power for sensors, 10-layer HDI.
48 V Power Distribution Board PCBA for Mobile Robots 48 V power distribution board PCBA for robots. Multi-rail conversion, eFuse and hot-swap protection, per-rail current monitoring, 6-layer 3 oz copper.
Joint Servo Drive Board PCBA for 48 V Robot Actuators 48 V joint servo drive board PCBA for robot actuators. FOC control, 60 A peak output, magnetic encoder input, 6-layer 3 oz copper with thermal vias.
Busbar and Pre-charge Board PCBA for Battery Cabinets Thick copper busbar and pre-charge board PCBA for battery cabinets. 4 oz copper, 400 A paths, shunt sensing and contactor drive, tested at rated current before shipment.
SiC Gate Driver Board PCBA for Central and String PCS Isolated gate driver board PCBA for 1200 V SiC and IGBT modules in PCS. 3 oz copper, thermal vias under the driver, 100% functional test with double-pulse verification.
High-Voltage Cell Monitoring Board PCBA for 1500 V Battery Racks 16S cell monitoring board PCBA for 1500 V racks. Reinforced isolation, 2 oz copper, selective conformal coating, 100% hipot and cell-simulator test before shipment.
AD9361 Dual-Channel RF Transceiver FMC Card for SDR Platforms AD9361 based dual-channel RF transceiver FMC card, 70 MHz to 6 GHz 12-bit ADC and 12-bit DAC per channel, up to 56 MHz instantaneous bandwidth, TDD and FDD FMC LPC host interface, internal or external reference clock, optional GPS clock and pulse-per-second All models listed below are combined into this single product for easy sourcing
Biomedical Interface PCBA for Neural Signal Processing Systems The biomedical interface PCBA provides reliable electronic connection and signal transmission between different parts of the medical equipment system. Main functions include: Supporting connection between sensing interfaces and electronic processing modules Maintaining stable transmission of sensitive signals Supporting compact electronic system integration Providing reliable operation in biomedical applications
Neurophysiology Signal Acquisition PCBA for Medical Research Equipment Superb provided PCBA manufacturing support for a neurophysiology signal acquisition system, including precision PCB assembly, component sourcing and production quality management. The project involved critical electronic modules designed to capture, amplify and process weak biological signals in advanced medical research equipment. Superb supported the customer with a complete electronics manufacturing solution from PCB fabrication coordination to SMT assembly and production delivery.
Electrophysiology DAQ solution 512-Channel Neural Signal Acquisition | Intan RHD Chipset · FPGA Processing | USB 3.0 · 30 kHz/ch | Low-Noise Analog Front-End | Open Ephys Compatible The electrophysiology data acquisition (DAQ) board is a high-density mixed-signal PCB that digitizes microvolt-level neural signals from up to 512 channels simultaneously and streams them to a host computer over USB 3.0. Compatible with the Open Ephys open-source platform, this board integrates Intan RHD-series bioamplifier chips, an FPGA for data aggregation and protocol handling, USB 3.0 PHY, and DDR memory — all on a single high-layer-count PCB. Superb Automation provides turnkey PCBA for these neuroscience research instruments, with the precision analog handling and signal isolation that µV-level recording demands.