HMC705LP4E The HMC705LP4E is a low noise GaAs HBT programmable frequency divider from Analog Devices, capable of dividing any input frequency from 100 MHz to 6.5 GHz by any integer value from N=1 to N=17. With an ultra-low SSB phase noise floor of -153 dBc/Hz at 100 kHz offset, this prescaler enables high-performance, fast-settling PLL frequency synthesizer architectures used in radar, satcom, test equipment, and electronic warfare systems. The flexible single-ended or differential I/O, 5-bit parallel programming interface, and compact 4x4mm 24-QFN package make it a versatile building block for precision LO generation and clock distribution chains.
CGHV96050F2 MACOM CGHV96050F2 is a rf & microwave component designed for SATCOM Ground Terminals and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
ADRV9009BBCZ The ADRV9009BBCZ is a highly integrated dual RF transceiver from Analog Devices, combining dual independent transmitters, dual receivers, and dual observation receivers in a single 196-CSPBGA package. Covering 75 MHz to 6 GHz with up to 200 MHz receiver bandwidth and 450 MHz ORx bandwidth, it delivers the RF performance and integration needed for 3G/4G/5G base stations, TDD active antenna systems, and wideband phased-array applications. Integrated fractional-N synthesizers, DPD-ready observation paths, and JESD204B serial interface up to 12.3 Gbps simplify system design while maximizing power amplifier efficiency.
SAMP090950-60P — X-Band 1000W GaN Solid-State Power Amplifier Superb Automation Standard Product · 9.0–9.5 GHz · 1000W Peak (60 dBm) · Pulsed · WR90 Waveguide · RS485 · GaN HEMT Class AB
AD9915BCPZ The AD9915BCPZ is a 2.5 GSPS Direct Digital Synthesizer (DDS) with an integrated 12-bit DAC, capable of generating frequency-agile analog sinusoidal outputs up to 1.0 GHz. With 135 pHz frequency tuning resolution, −128 dBc/Hz phase noise, 32-bit parallel datapath, and automatic linear/nonlinear frequency sweeping, it is the premier choice for agile LO synthesis, FMCW radar chirp generation, and high-performance test and measurement equipment.
AD9363BBCZ The AD9363BBCZ is a high-performance 2×2 RF Agile Transceiver™ purpose-built for 3G and 4G femtocell base stations. It combines best-in-class receiver sensitivity (−122dBm), ultralow transmitter EVM (−34dB), and a highly integrated direct-conversion architecture spanning 325MHz to 3.8GHz. With SPI + UART control, RSSI, and AGC, it delivers carrier-grade small-cell performance — also popular in PlutoSDR and open-source SDR platforms.
CGHV35150F-AMP CREE CGHV35150F-AMP - RF & Microwave.Application:SATCOM, 5G mmWave, Phased-Array Radar, EW/Defense, Point-to-Point Radio, RF Test
CMPA2935150S CREE CMPA2935150S - RF & Microwave.Application:SATCOM, 5G mmWave, Phased-Array Radar, EW/Defense, Point-to-Point Radio, RF Test
CGHV40100F CREE CGHV40100F - RF & Microwave.Application:SATCOM, 5G mmWave, Phased-Array Radar, EW/Defense, Point-to-Point Radio, RF Test
CGHV40100F-AMP CREE CGHV40100F-AMP - RF & Microwave.Application:SATCOM, 5G mmWave, Phased-Array Radar, EW/Defense, Point-to-Point Radio, RF Test
CGHV96100F2 CGHV96100F2 is a high-performance RF power transistor from Wolfspeed (Cree). Designed for RF and microwave applications, it operates up to 960 MHz with high output power, high efficiency, and rugged construction — well-suited for telecommunications, radar systems, and industrial/scientific/medical (ISM) applications. Built on gallium nitride (GaN) on silicon carbide (SiC) substrate technology, it delivers superior power density and thermal management.
CGHV96100F2-AMP CREE CGHV96100F2-AMP - RF & Microwave.Application:SATCOM, 5G mmWave, Phased-Array Radar, EW/Defense, Point-to-Point Radio, RF Test
English
English
