Nameplates and Engraved Panel Labels for Equipment
Product Specifications
Product Overview
A nameplate fails for one of two reasons: the print wears off, or the adhesive lets go. Engraved laminate answers the first, because the colour contrast sits in a second layer of the sheet and only appears where the top layer is cut away. Choosing the right fixing answers the second.
Three families cover most builds. Engraved 2-ply acrylic laminate is the panel standard at 1.6 mm; the phenolic version takes higher heat and cleaning solvents. Printed polyester stock prints barcodes and serials at thermal transfer speed. Device markers from Phoenix Contact handle the small fields on controllers, buttons and terminal carriers.
Fix three numbers before quoting: plate size, thickness and fixing. A 0.5 mm sheet conforms to a curved cover, 1.6 mm sits flat on a door, and 3.2 mm takes a knock on a valve tag or an outdoor plate.
Key Specifications
| Family | Substrate | Thickness or field | Marking | Temperature | Fixing |
|---|---|---|---|---|---|
| Engraved 2-ply laminate | Acrylic cap over contrast core | 0.5 / 1.6 / 3.2 mm, sheet 600 x 1200 mm | Rotary or laser engraving | -45 to +80 C | Adhesive backing, screws, rivets |
| Engraved 3-ply laminate | Phenolic core | 1.5 / 3.0 mm | Rotary engraving | -40 to +100 C | Adhesive, drilled holes |
| Polyester label stock | Gloss white polyester, permanent acrylic | Roll or die-cut sheet | Thermal transfer print | -70 to +120 C | Pressure-sensitive adhesive |
| Metallised polyester | Silver polyester film | Roll or die-cut sheet | Thermal transfer print | -70 to +120 C | High-adhesion acrylic |
| Aluminium device marker | Anodised aluminium | 100 x 60 mm field, 2 per sheet | Engraved or printed | On request | Adhesive |
| Polycarbonate insert label | Polycarbonate | 6 x 10 mm field, 54 per sheet | Thermal transfer print | -40 to +120 C | Snaps into carrier |
| Insert label from roll | Polyester film, white RAL 9010 | 62 x 10 mm field | Thermal transfer print | On request | Inserts into carrier |
Included Models and Order Codes
The order codes below are the ones quoted most often. Sheet laminate is cut to drawing; label stock ships in the maker pack.
| Part number | Family | Size or format | Colour and finish | Fixing | Notes |
|---|---|---|---|---|---|
| Gravoply 1.6 mm | Engraved laminate | Sheet 600 x 1200 mm | Cap and core colour pairs | Adhesive on request | Panel standard thickness |
| Gravoply 3.2 mm | Engraved laminate | Sheet 600 x 1200 mm | Cap and core colour pairs | Adhesive on request | Valve tags and outdoor plates |
| TroLase 1.6 mm | Engraved laminate | Sheet 1200 x 600 mm, quarter sheet 600 x 300 mm | Gloss or matte, 2 or 3 ply | Adhesive on request | Laser, saw or guillotine |
| TroLase 3.2 mm | Engraved laminate | Sheet 1200 x 600 mm | Gloss or matte | Adhesive on request | Heavy duty plates |
| Traffolyte 1.6 mm | Engraved laminate | Sheet 600 x 300 mm and 400 x 300 mm | Matte, phenolic | Adhesive on request | Solvent immune, -40 to +100 C |
| B-423 | Polyester label | Roll or die-cut sheet | Gloss white | Permanent acrylic | -70 to +120 C, rating plates |
| B-483 | Polyester label | Roll or die-cut sheet | Gloss white | High-adhesion acrylic | Powder-coated surfaces |
| B-480 | Metallised polyester | Roll or die-cut sheet | Silver metallic | Acrylic for low surface energy | Nameplate quality finish |
| LS-EMLP-AL (100X60) | Aluminium marker | 100 x 60 mm, 2 labels per sheet | Natural aluminium | Adhesive | Order code 0831872 |
| LS-EMLP (27X18) YE | Device marker | 27 x 18 mm | Yellow RAL 1018 | Adhesive | Order code 0832031 |
| EMT (62X10)R | Insert label | 62 x 10 mm field, roll | White RAL 9010 | Inserts into carrier | Order code 0830251 |
| UCT-EM (6X10) | Insert label | 6 x 10 mm field, 54 per sheet | White | Snaps into carrier | Order code 0801493, -40 to +120 C |
Key Features
Marking sits inside the sheet – engraving cuts the cap layer and exposes the core colour, so the text cannot rub off, fade or peel.
Three thicknesses, three jobs – 0.5 mm follows a curved cover, 1.6 mm is the flat panel standard, 3.2 mm survives knocks on tags and outdoor plates.
Label stock for serials and barcodes – B-423 prints at thermal transfer resolution and holds -70 to +120 C; B-480 gives a silver finish that reads as a metal plate.
Solvent immune option – phenolic Traffolyte holds -40 to +100 C and is not attacked by cleaning solvents.
Small fields on controllers – EMT 62 x 10 mm and UCT-EM 6 x 10 mm cover buttons, modules and terminal carriers without custom tooling.
Fixing matched to the surface – adhesive for painted doors, drilled screws or rivets for cast frames, snap-in carriers where the housing already has a slot.
Applications
Nameplates are bought at the end of the build, when the panel is painted and the harness is dressed. Three patterns repeat.
Industrial control cabinets – door plates, valve tags and terminal markers that must survive cleaner and coolant.
Telecom and RF racks – rack unit labels, asset tags and serial plates on amplifiers and power shelves.
Medical and laboratory instruments – cleanable plates on analysers and pumps, with serials printed on polyester stock.
For builds that ship as a complete unit, the SUPERB PCB and the SUPERB PCBA leave the line with the plates already fitted and checked against the drawing.
Sourcing and Cross-Reference
Send the engraving file as DXF, PDF or AI with the text converted to outlines. Plate size, hole positions and the colour pair go on the same drawing; a photo of the old plate is enough when no drawing exists.
When a label field carries a discontinued part number, we quote the replacement stock and keep the original marking, so the panel still matches the service manual. The obsolete part cross reference hub explains how the substitution is documented.
Mixed orders are consolidated: laminate plates, label rolls and device markers ship as one kit per cabinet, with a packing list keyed to the panel drawing.
Lead time depends on the engraving queue rather than the material. Sheet stock is normally available; cut and engraved plates take longer, and a repeat order with the same file is quicker than a new one.
Plates can be kitted with the board set, so the SUPERB Assembly team fits them at final build instead of shipping loose labels.
Q: Can you supply a nameplate to our drawing with our own part number and logo?
A: Yes. Send the drawing with the logo as vector art and we quote plate, engraving and adhesive as one item; the SUPERB Tech team can also match an existing plate from a sample.
Why Builders Buy Nameplates From SUPERB
- Plate and marking in one quote: the material, the engraving and the adhesive are priced together, so there is no second supplier for artwork.
- Obsolete fields stay readable: a discontinued part number on a label is matched to the current replacement before the plate is cut.
- Kitting to the cabinet: plates ship sorted per panel and keyed to the drawing, which removes sorting at the line.
- Small and repeat orders: one plate or a batch of five hundred follows the same drawing check.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Cable Markers and Wire Labels, Viewing Windows and Display Bezels, Rocker and Toggle Switches, Obsolete Part Cross Reference Hub.