Contact Us
  • Home
  • COMPONENTS
  • Viewing Windows and Display Bezels for Enclosure Panels

Viewing Windows and Display Bezels for Enclosure Panels

A viewing window is a gasketed hole in a door, and the cut out is always larger than the viewing area by the width of the frame. The bolt on kits here use a 6.35 mm polycarbonate pane in a 14 gauge steel frame, rated UL Type 12, 3R, 4 and 4X on the stainless versions. Module windows from 60 x 77 mm to 377 x 331 mm cover a plastic case or a meter panel, in clear or smoked polycarbonate, from IP54 to IP66. Acrylic glazed covers for 19 inch racks run from 3 U to 9 U with a lock insert, for a panel that has to be read and not opened.
quote now

Product Specifications

Product Overview

A viewing window exists so a display, a meter or a lamp can be read without opening a sealed door. Physically it is a hole with a transparent pane and a gasket around it, and every part of the problem comes from that: the hole weakens the door, the pane adds a surface that fogs and scratches, and the gasket has to be compressed evenly or the cabinet loses the rating it was built for.

There are two families on this page and they are used in different places. A bolt on frame kit is a steel frame with a polycarbonate pane and a foam gasket, screwed to the outside of a sheet steel door over a rectangular cut out. A module window is a thin polycarbonate sheet that sits in a rebate or over a cut out in a plastic or sheet metal case, often without a frame at all, and it is the part for a meter box, a small instrument or a wall mount enclosure.

The number that is wrong most often is the cut out. The viewing area is the clear opening the operator looks through; the cut out is the hole that has to be punched, and it is larger by the width of the frame on each side. On the 5 x 3 in kit the viewing area is 127 x 76 mm and the cut out is 170 x 119 mm, which is 21 mm per side. Cutting the viewing area instead of the cut out leaves a window that cannot be fitted, and cutting a hole that is generous leaves a gasket with nothing to press on.

The frame kit carries a 6.35 mm polycarbonate pane in a 14 gauge steel frame, in carbon steel with a powder coat over a dip coat primer, or in 304 and 316L stainless. The gasket is foamed in place around the frame and is oil resistant, and the rating follows the frame material: UL Type 12, 3R and 4 on the carbon steel version and Type 4X as well on the stainless. All the hardware comes with the kit, which matters because the screws are the part that has to compress the gasket evenly rather than one at a time.

Module windows are a different calculation. They are a 1 mm polycarbonate sheet, clear or smoked, sized in steps that suit a DIN module width: 60 x 77 mm for two modules, 96 x 77 mm for four, up to 199 x 77 mm for ten. The larger sizes step up to IP65, and the protection windows in the same range go to IP66 with a lock, which is the part for a cabinet that has to be opened by a key rather than a screwdriver. Impact on these parts is listed as IK08, which is a 5 joule hit, and that is a different question from the water rating.

Material choice is a trade between impact and clarity. Polycarbonate takes a hammer blow and is the right part for a machine guard or a door that gets knocked; acrylic is clearer, harder and scratches less, but it cracks rather than bends and it is the material used on the 19 inch covers because the pane is protected by the rack frame. Polycarbonate yellows under ultraviolet light, which is why the outdoor versions are quoted as UV stabilised, and an untreated pane on a south facing cabinet goes amber in three years.

Smoked and tinted panes solve one problem and create another. A smoked cover hides the inside of a cabinet from a passer by and cuts the glare from a bright display, but it also cuts the light the display sends out, so a display that is readable through clear polycarbonate is marginal through a smoked one. Clear panes transmit about 90 percent of the light and a smoked pane can be half of that, which is the figure to put against the display brightness before the cover is chosen.

Two effects are worth planning for before the door is cut. The first is parallax: a pane that stands 8 mm off the display shifts the apparent position of a needle or a digit when the operator reads it from the side, so a meter behind a deep frame is read slightly wrong. The second is condensation: a gasket sealed cabinet with a pane fogs on the inside when the temperature drops, and the answer is a pressure equalization vent rather than a bigger gasket. A window on a cabinet that breathes is a window that stays clear.

Where the cabinet is shielded, the window is an aperture in the shield and the size of the opening sets the frequency that leaks. A metal mesh laminated into the pane or a conductive gasket around the frame is the fix, and the mesh costs light in both directions. A window quoted without that detail is a window that passes the leak test and fails the emissions test.

Key Specifications

ParameterValueNotes
Frame kit panePolycarbonate, 6.35 mm (0.25 in)Clear, UV stabilised
Frame kit frame14 gauge steel, carbon, 304 or 316L stainlessPowder coat over dip coat primer on carbon
Frame kit gasketFoamed in place, oil resistantCompressed by the frame screws
Frame kit ratingsUL Type 12, 3R, 4 and 4XType 4X on the stainless frame
Viewing area against cut outCut out is larger by the frame width21 mm per side on the 5 x 3 in kit
Module window panePolycarbonate, 1 mm, clear or smokedSits in a rebate or over a cut out
Module window ratingsIP54, IP65 and IP66IP66 on the protection windows with a lock
Impact on module windowsIK085 joule impact
Module window sizes60 x 77 mm to 377 x 331 mmIn DIN module width steps
Frame colourRAL 7035 light greyStainless frame left natural
FixingScrews through the frame, hardware suppliedTightened in sequence around the frame
Rack covers19 in, 3 U to 9 U, acrylic pane, IP54Lock insert, smoked or clear

Included Models and Order Codes

The windows are listed by the door they fit rather than by the pane size, because the cut out is what has to be planned. A kit is ordered with its cut out, its viewing area and its frame material, and a module window with its outside size and its rating.

Part NumberTypeViewing AreaCut OutFrame or PaneRating
8018444Frame window kit, WK0503C127 x 76 mm (5 x 3 in)170 x 119 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018447Frame window kit, WK0905C229 x 140 mm (9 x 5.5 in)271 x 183 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018450Frame window kit, WK1303C330 x 76 mm (13 x 3 in)373 x 119 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018453Frame window kit, WK1308C330 x 203 mm (13 x 8 in)373 x 246 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018456Frame window kit, WK1705C432 x 140 mm (17 x 5.5 in)475 x 183 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018459Frame window kit, WK1711C432 x 279 mm (17 x 11 in)475 x 322 mmCarbon steel frame, PC paneUL Type 12, 3R, 4
8018445Frame window kit, WK05034127 x 76 mm (5 x 3 in)170 x 119 mm304 stainless frame, PC paneUL Type 4X
8018448Frame window kit, WK09054229 x 140 mm (9 x 5.5 in)271 x 183 mm304 stainless frame, PC paneUL Type 4X
8018446Frame window kit, WK05036127 x 76 mm (5 x 3 in)170 x 119 mm316L stainless frame, PC paneUL Type 4X
3730660Module window, L 0260 x 77 mmModule cut outPC, clear, 1 mmIP54
3730661Module window, L 0496 x 77 mmModule cut outPC, clear, 1 mmIP54
3730662Module window, L 06130 x 77 mmModule cut outPC, clear, 1 mmIP54
3730663Module window, L 08162 x 77 mmModule cut outPC, clear, 1 mmIP54
3730664Module window, L 10199 x 77 mmModule cut outPC, clear, 1 mmIP54
3730692Module window, L 13257 x 108 mmModule cut outPC, clearIP65
3730775Module window, L 12 II248 x 128 mmModule cut outPC, smokedIP65
3730776Module window, L 24 II248 x 218 mmModule cut outPC, smokedIP65
4512298Module window, L 43 II331 x 277 mmModule cut outPC, smokedIP65
4512299Module window, L 44 II377 x 331 mmModule cut outPC, smokedIP65

Protection Windows and Glazed Rack Covers

A protection window goes over a display that has to be read and protected, and it carries its own lock rather than a screw fixing. The rack covers are the 19 inch version of the same idea, with an acrylic pane in an aluminium frame for a panel that is opened by an operator.

Part NumberTypeSizeDepthPaneRating
4901824Protection window, PW 343009T340 x 300 mm90 mmPC, transparentIP66, DB3 lock
4901804Protection window, PW 454009T450 x 400 mm90 mmPC, transparentIP66, DB3 lock
2780.000Acrylic glazed cover, 3 U320 x 158 mm47.5 mmAcrylic, smokedIP54
2781.000Acrylic glazed cover, 6 U534 x 158 mm47.5 mmAcrylic, smokedIP54
2782.000Acrylic glazed cover, 9 U534 x 291.5 mm47.5 mmAcrylic, smokedIP54
2784.000Acrylic glazed cover, metric400 x 200 mm47.5 mmAcrylic, smokedIP54
2785.000Acrylic glazed cover, metric400 x 400 mm47.5 mmAcrylic, smokedIP54
2786.000Acrylic glazed cover, metric500 x 200 mm47.5 mmAcrylic, smokedIP54
2787.000Acrylic glazed cover, metric500 x 400 mm47.5 mmAcrylic, smokedIP54
2788.000Acrylic glazed cover, metric600 x 200 mm47.5 mmAcrylic, smokedIP54
2789.000Acrylic glazed cover, metric600 x 400 mm47.5 mmAcrylic, smokedIP54

Key Features

Cut out and viewing area both stated – The clear opening and the hole to punch are different numbers, and both are listed so the door is cut once.

6.35 mm polycarbonate pane – A quarter inch pane in the frame kits, which is the thickness that takes a knock without cracking.

Carbon, 304 and 316L frames – Type 12, 3R and 4 on the painted frame and Type 4X on the stainless, for a cabinet that is washed down.

Foamed in place oil resistant gasket – The seal is on the frame rather than a strip that can be fitted upside down.

Module windows from 60 mm to 377 mm – Two to ten module widths in clear polycarbonate, for a meter box or a small instrument case.

IP54 to IP66 in one range – A plain meter window and a locked protection window come from the same family, so the rating is a choice rather than a new layout.

Clear or smoked panes – Smoked hides the inside and cuts glare, and clear passes about twice the light, so the display brightness follows the choice.

19 inch covers from 3 U to 9 U – An acrylic pane in an aluminium frame with a lock insert, for a rack panel that is read and not opened.

Applications

These windows go on analyser and meter doors, machine control cabinets, outdoor roadside cabinets, rack panels and DIN module enclosures.

Analyser and instrument doors – A 6.35 mm polycarbonate kit over a display in a sheet steel door, with the cut out planned around the door stiffener.

Outdoor roadside cabinets – A 316L frame kit with a UV stabilised pane, on a door that sees sun and salt and is hosed down twice a year.

DIN module and meter boxes – A 96 x 77 mm clear module window over a meter in a plastic case, at IP54 and IK08.

Rack and panel displays – A 6 U acrylic glazed cover with a lock insert over an instrument panel, so the settings can be read and not changed.

A window is a hole in a sealed door, and the SUPERB PCB panel drawing has to show the cut out and the viewing area as two different rectangles before the door is punched. On the SUPERB PCBA route the display is fitted to the board first and the window is chosen against the display outline, because a window that is 3 mm small hides the last digit of a meter.

Sourcing and Cross-Reference

A window is ordered from four numbers: the readable area, the cut out, the door thickness and the rating the cabinet has to keep. The readable area comes from the display outline plus a margin, the cut out follows from the frame, and the rating follows from the frame material. Where only the display size is known, the frame width is added to get the cut out, and that is the order the drawing has to be checked in.

Where a window replaces another make, the cut out and the viewing area are the cross reference and the frame is not. A 170 x 119 mm hole takes the kit made for it, and a kit with the same pane and a different cut out is a different part. Where the cut out is already made and is larger than the new frame, the answer is an adapter plate, and that plate is a separate part rather than a bigger gasket.

The gasket is the part that decides whether the rating survives the installation. A foamed gasket that is compressed by a frame screw at each corner and not in the middle bows away between the screws, so the screws are run down in sequence and not one at a time. Where the door is thin and pulls in around the cut out, a stiffener is added behind the frame rather than a second gasket in front of it.

SUPERB Assembly fits a window to the first door of a build and checks the seal with a smoke test around the frame, because a gasket that is pinched at one corner passes a visual check and still lets water into a cabinet.

Q: Can you supply a 170 x 119 mm cut out window kit in 304 stainless for a washdown cabinet, and a 96 x 77 mm clear module window for a meter box?

A: Send the display outline, the readable area you need, the door thickness, the door material and the rating the cabinet has to keep. The SUPERB Tech desk quotes the window with its cut out and its viewing area, so the door is punched once and the seal is right the first time.

Why Buy Viewing Windows Through SUPERB

  1. Cut out and viewing area separated: The hole to punch and the opening to look through are two numbers, and both are quoted on one line.
  2. Frame material matched to the rating: Painted steel for Type 12 and 4, stainless for 4X, so the cabinet rating is not lost at the window.
  3. Seal supplied with the frame: A foamed gasket and the screws come with the kit, which is what the seal depends on.
  4. Module windows in one range: IP54 to IP66 and 60 mm to 377 mm from the same family, so a meter box and a locked cabinet are one order.
  5. Spares for a damaged pane: A replacement window is quoted with the same cut out, so a scratched pane does not become a new door.

Related Product Families

This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: EMI Shielding Cans and Contact Gaskets for RF Boards, Silicone O Rings and Sealing Gaskets for Enclosures, Breather Vents and Pressure Equalization Plugs for Sealed Cases, Enclosure Handles and Corner Guards for Portable Units, Draw Latches and Toggle Latches for Enclosure Doors, Obsolete Part Cross Reference Hub.