Contact Us

Enclosure Door Stays and Retaining Clips

Door stays that hold a cabinet door open, with no machining on the AE and VX types. Escape route stays that release the door under pressure, for doors on a walkway. Door stops for wall mounted enclosures from 300 mm width, in plated steel. Packs of five for the AE stay, single pieces for the VX and TS types.
quote now

Product Specifications

Product Overview

A door stay is a small part that decides how a cabinet is used. Without one, a 1800 mm door on a hinge swings past the open position, pulls the hinge screws, and in a walkway becomes an obstruction at head height. With one, the door holds at a fixed angle while a fitter works with both hands inside the cabinet.

The simple stay is a folding link between the door and the frame, fitted at the top of the enclosure and fixed without machining on the AE and VX families. The escape route stay is a different part: it holds the door open in normal use and releases automatically when pressure is applied, so a person leaving the room cannot be trapped by a door that was propped open. It is used together with 180 degree hinges so the door can swing both ways.

The third family is the door stop. It does not hold the door at an angle; it stops the door before it reaches the wall or the next cabinet, and it is the part for a wall mounted enclosure where a stay has nothing to reach. Width matters here: a stop needs a minimum enclosure width to have something to mount to, and a 300 mm wide box is the usual lower limit for a drilling type.

Key Specifications

TypeFunctionFitsFixingPackMaterial
Door stay, folding linkholds the door openAE and AE stainless enclosuresno machining, top mounted5 piecessteel, zinc plated
Door stay for escape routesholds open, releases under pressureVX enclosureswith 180 degree hinges1 piecesteel, 0.25 kg
Door stay for escape routesholds open, releases under pressureTS, VX SE and PC enclosureswith 180 degree hinges1 piecesteel, 0.36 kg
Door and panel stopstops the door at a set anglemodular polyester wall mounted, from 750 mm widthno machining1 piece with fixingssteel, plated
Door stop, wall mountedstops the door at a set anglewall mounted, from 300 mm widthdrilling required, top or bottom1 piece with fixingssteel, plated
Large door stop kitholds the door at 90 degreeslarge mild and stainless enclosurestop or bottom of the opening1 kitplated steel

Included Models and Order Codes

The code alone does not tell you which enclosure the stay fits, so the table keeps the family in the description. The AE stay is a pack of five and is the one that covers a batch of small cabinets; the VX and TS escape route stays are single pieces because they are fitted where a walkway passes the door.

Part numberFamilyHolds openFitsPack
2519.000SZ door stayopen position, top mountedAE, AE stainless5 pieces
8618425SZ door stay for escape routesreleases under pressureVX1 piece
4583500SZ door stay for escape routesreleases under pressureTS, VX SE, PC1 piece
UDS01Hoffman door and panel stopset open anglemodular polyester from 750 mm width1 piece
ADOHoffman door stopset open anglewall mounted from 300 mm width1 piece
Door stop kit, largeHoffman kit90 degreeslarge mild and stainless enclosures1 kit

Which Stay for Which Door

The choice is made on the door weight, the swing and what is behind the door, not on the cabinet series alone. This is the short version.

Door and locationStay typeReason
AE cabinet, door up to 180 degrees2519.000folding link, fixed without machining
VX cabinet beside a walkway8618425releases under pressure, door opens both ways
TS or PC cabinet in a plant room4583500same release, bracket for the older frame
Wall mounted box, 400 mm wideADOdrilling type, fits from 300 mm width
Modular polyester box, 800 mm wideUDS01no machining, mounts on door and body
Large free standing door, 90 degreeslarge door stop kitholds at 90 and keeps Type 4 and 12

Key Features

Fixed without machining on AE and VX – the stay is screwed to the door and the frame with the parts in the pack, so a retrofit does not need the cabinet to be stripped.

Escape route release – the special stay releases the door when pressure is applied, which keeps a walkway clear without locking the door open.

Packs that match the job – five pieces for a batch of small cabinets, single pieces for a walkway door.

Door stops for wall mounted boxes – where a folding stay has nothing to reach, a stop fixes the angle against the body.

Type 4 and Type 12 maintained – the large door stop kit is installed without breaking the enclosure rating when it is fitted as instructed.

Steel and plated finishes – zinc plated or plated steel parts, so the stay does not become the first rust point on a painted door.

Applications

Door stays are chosen by where the door opens, not by the cabinet size. Three cases.

Cabinets along a walkway – an escape route stay on every door that opens into the aisle, so a propped door releases instead of blocking the way.

Maintenance points opened daily – a folding stay on the AE door, so the fitter has both hands free at the terminal rail.

Wall mounted boxes in a corridor – a door stop rather than a stay, because the door has to stop before it reaches the wall.

Door stays and interlock switches are ordered with the hinges and locks for the same door, and both the SUPERB PCBA and the SUPERB PCB are checked against the panel wiring schedule so the safety circuit and the door hardware arrive together.

Sourcing and Cross-Reference

Check the hinge first. An escape route stay is specified with 180 degree hinges; fitted to a standard hinge the door cannot swing both ways and the release does nothing. Order the hinge and the stay as one pair.

Take the door weight into account. A folding link sized for a 600 mm door is not the part for a 1200 mm door with a window; the larger door needs the kit type, not the small stay.

Decide whether the door is to be held or stopped. A stay holds an angle and a stop limits travel. In a corridor the stop is usually the right part, because a held door is still an obstruction.

Fit after painting. A stay fitted to bare metal before the cabinet is painted has to come off again, and the screw holes are then painted over. See lead time and availability when the stays ship with the cabinets.

The SUPERB Assembly team sets the actuator gap on the bench before the door is hung, because a tongue switch that is set after painting usually ends up too far from the actuator and trips on a slammed door.

Q: Does the escape route stay need a special hinge, and is the door stay supplied in a pack of five?

A: Yes. Send the door drawing with the hinge side, the opening angle and the control voltage; the SUPERB Tech team quotes the stay and the interlock with the actuator and the connector that match the door.

Why Builders Buy Door Stays From SUPERB

  1. Stay and hinge checked together: the escape route type is quoted with the 180 degree hinge it needs, so the door actually releases.
  2. Enclosure family stated per code: AE, VX and TS stays are kept apart, because the bracket differs even when the function is the same.
  3. Packs and single pieces: five piece packs for a batch, single pieces for one walkway door.
  4. Stops for wall mounted boxes: a stop is quoted where a stay cannot reach, instead of a stay that does not fit.

Related Product Families

This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Continuous and Butt Hinges, Draw Latches and Toggle Latches, Cam Locks and Key Locking Latches, Holding Magnets and Magnetic Catches.