Contact Us
English

MCU & Embedded Processors Sourcing

TPS82085SILR

TPS82085SILR

Texas Instruments - 3A Continuous, DCS-Control, 17uA IQ, 2.4MHz, 8-uSiP 2.8x3.0mm, -40 to +125C MFR Part #: TPS82085SILRSuperb SKU: SUP-TPS82085SILR In Stock - Ready to Ship The TPS82085SILR is a 3A step-down DC-DC converter MicroSiP module from Texas Instruments, integrating the buck converter IC and power inductor into a single 2.8x3.0mm package. Optimized for 2.5V to 6V input (single Li-Ion, USB 5V, 3.3V rails), it delivers up to 3A with 95% peak efficiency at 2.4MHz switching frequency. The DCS-Control topology provides fast transient response with seamless PWM-to-Power-Save transition, and the 17uA quiescent current extends battery life in always-on applications. With -40C to +125C operation and an ultra-compact footprint requiring only 4-5 external passives, it is the ideal power solution for IoT wearables, portable medical devices, and space-constrained battery-powered embedded systems.

GRM188C80E107ME01D

GRM188C80E107ME01D

Murata Manufacturing - Monolithic Ceramic Capacitor, 1.6x0.8x0.8mm, +/-20% Tolerance, Low ESR/ESL MFR Part #: GRM188C80E107ME01DSuperb SKU: SUP-GRM188C80E107ME01D In Stock - Ready to Ship The GRM188C80E107ME01D is Murata's industry-first 100uF MLCC in 0603 size, achieving breakthrough capacitance density through advanced fine-particle X6S dielectric and sub-micron layer lamination technology. Rated at 2.5V with ultra-low ESR and ESL inherent to monolithic ceramic construction, it enables single-component bulk decoupling on low-voltage FPGA/ASIC core rails (1.0V, 1.2V, 1.8V) where board space is at a premium. The 1.6x0.8mm footprint eliminates the need for multiple smaller capacitors or larger tantalum electrolytics — a single GRM188C80E107ME01D replaces 10x 10uF 0603 MLCCs or 2-3 tantalum capacitors, dramatically reducing BOM count and PCB area in power-dense embedded designs.

W25N01GVZEIG

W25N01GVZEIG

Winbond Electronics - 128MB, 2KB+64B Page, On-Die ECC, 100K P/E, 10-Year Retention, Industrial -40 to +85C MFR Part #: W25N01GVZEIGSuperb SKU: SUP-W25N01GVZEIG In Stock - Ready to Ship The W25N01GVZEIG is a 1Gb (128MB) SLC SPI NAND Flash from Winbond, delivering 8x the density of a 128Mb NOR at approximately 1/3 the cost per bit. Operating at 104MHz Quad SPI (up to 416 Mbps), it combines SPI's low pin count with NAND's cost-efficient high-density storage. The 2KB+64B page architecture with on-die 1-bit ECC simplifies host-side error correction, while continuous read and buffer read modes optimize throughput for sequential data access. With 100,000 P/E cycles, 10-year retention, and industrial -40 to +85C rating, it serves as cost-effective boot media for embedded Linux, firmware storage for IoT gateways, and high-density data logging where NOR Flash capacity is insufficient and eMMC is overkill.

OP2177ARMZ

OP2177ARMZ

The OP2177ARMZ is Analog Devices' benchmark precision dual operational amplifier, delivering 15uV typical offset voltage with an ultra-low 0.2uV/C drift — performance that eliminates external trimming in virtually all DC-precision applications. Each channel combines 1.3MHz gain-bandwidth, 8nV/rtHz voltage noise, 500pA input bias current, and only 0.5mA supply current across a wide 5V to 30V supply range. The dual-channel MSOP-8 package (3x3mm) provides two precision amplifiers in the footprint of a single SOIC-8. Outputs are stable with capacitive loads exceeding 1000pF with no external compensation. From bridge/load-cell signal conditioning to thermocouple amplifiers and medical instrumentation, the OP2177 is the gold standard for precision dual op-amp designs.

LM5164DDAR

LM5164DDAR

The LM5164DDAR is a wide-input-voltage, 1A synchronous buck DC-DC converter from Texas Instruments — designed to step down voltages from as high as 100V to a regulated output as low as 1.2V, all from a single 8-pin SO PowerPAD package. With integrated high-side and low-side N-channel MOSFETs, constant on-time (COT) control for fast transient response, and an industry-leading sub-10µA no-load quiescent current, it is the go-to regulator for always-on industrial sensors, 48V telecom power supplies, Power-over-Ethernet (PoE) powered devices, and automotive battery-connected electronics where every microamp of standby current counts.

MT41K128M16JT-125:K

MT41K128M16JT-125:K

The MT41K128M16JT-125:K is a 2 Gb (256 MB) DDR3L SDRAM component from Micron Technology, organized as 128M × 16-bit and rated for DDR3L-1600 (1600 MT/s, PC3-12800). At 1.35V with full backward compatibility to 1.5V DDR3, it delivers twice the density of the 1Gb MT41K64M16 in the same 96-ball FBGA package — 3.2 GB/s peak bandwidth from a single chip for FPGA configuration, embedded Linux, and industrial controllers where 128 MB is too tight and migrating to DDR4 carries unnecessary overhead.