Contact Us

STM32G0B1RET6

Brand: ST
STM32G0B1RET6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32G0B1RET6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32G0B1RET6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics

The STM32G0B1RET6 is an STMicroelectronics ARM Cortex-M0+ MCU in LQFP-64 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32G0B1RET6Full Part NumberSTMicroelectronics ARM Cortex-M0+ Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
G0SeriesARM Cortex-M0+ based MCU — G0 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32G0B1RET6
CoreARM Cortex-M0+
PackageLQFP-64
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32G0B1RET6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in LQFP-64 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M0+ Core — Efficient Processing for Embedded Control

The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32G0B1RET6 supported by STM32CubeIDE?

Yes, the STM32G0B1RET6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32G0B1RET6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32G0B1RET6: 512 Kbytes and USB Type-C on a 64 pin body

The STM32G0B1 line puts a Cortex-M0+ at 64 MHz beside a peripheral set that until recently belonged to larger parts: two FDCAN controllers, a crystal-less USB full speed device and host port, a USB Type-C Power Delivery controller, six USARTs and two low power UARTs. This order code is the 64 pin LQFP body with 512 Kbytes of flash, which is the top of the density range.

The core is modest and the memory is not. 144 Kbytes of SRAM of which 128 Kbytes carry parity, against 512 Kbytes of flash in two banks with read-while-write, means a protocol heavy product can keep a stack, a bootloader and a parameter area live at once without moving to a bigger core. Figures are from DS13560 Rev 6.

The 512 Kbyte member in figures

CoreCortex-M0+ at 64 MHz
Flash512 Kbytes, two banks with read-while-write, securable area
RAM144 Kbytes, 128 Kbytes with hardware parity
Supply1.7 V to 3.6 V, separate I/O supply from 1.65 V
USBFull speed device and host, crystal-less, plus a Type-C Power Delivery controller
FieldbusTwo FDCAN controllers
SerialSix USART with ISO7816, LIN and IrDA, two LPUART, three SPI at 32 Mbit/s
I2CFast mode plus at 1 Mbit/s, two with SMBus and PMBus
ADC and DAC12-bit at 0.4 microsecond, up to 16 external channels, two 12-bit DACs
TimersFifteen, two capable of 128 MHz
I/OUp to 60 fast lines on this body, 94 across the family
TemperatureMinus 40 to plus 85 degrees C, 105 degree junction

Type-C without a separate controller

A product with a Type-C port normally needs a controller for the Power Delivery negotiation, and that part brings its own firmware, its own supply and its own failure modes. This device integrates the controller, so a charger, a dock or a battery pack can negotiate a contract in the same firmware that runs the rest of the product. That removes a component and a communication path from the board, and it also removes a supplier from the bill of materials.

The crystal-less USB port is the second saving. A device that would otherwise need a 48 MHz crystal and its load capacitors runs from the internal oscillator trimmed against the USB frame, which is accurate enough for full speed. On a small board with a metal enclosure that is one fewer sensitive node. Our CAN bus transceiver selection page covers the parts that sit between the two FDCAN controllers and the harness.

Two banks on a 64 MHz core

Read-while-write is unusual on a Cortex-M0+ part, and it is the reason this line appears in products that are updated in the field. The loader writes the new image into the idle bank while the application runs from the other, then switches the boot address. A power cut during the write leaves the old image intact, which is the behaviour a sealed unit in a wall needs.

The securable memory area protects a bootloader from being erased by the application, and the readout protection stops the array being read out. Together they allow a product to be built with a protected bootloader and still accept an application update from the customer site. The MCU cross reference page lists the density steps in this family with the bank arrangement each one carries.

Where the part fits and where it does not

It fits a gateway with two CAN channels, a USB service port and a display header. It fits a charger or a power bank with a Type-C port and a fuel gauge on I2C. It does not fit a motor drive that needs a floating point loop at 20 kHz, because the core has no FPU and the timer set, while broad, is not built for three phase control. Our component traceability report records the lot for every reel we ship, which matters on a part that carries firmware protection, since a silicon revision change can affect the option byte behaviour.

Packing is tray or tube unless a TR suffix is named, and the part is industrial grade rather than automotive qualified. A request for AEC-Q100 belongs on a different family, and we quote it as such instead of screening this one.