Contact Us

STM32G474RET6

Brand: ST
STM32G474RET6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32G474RET6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32G474RET6 — ARM Cortex-M4F Microcontroller by STMicroelectronics

The STM32G474RET6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-64 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32G474RET6Full Part NumberSTMicroelectronics ARM Cortex-M4F Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
G4SeriesARM Cortex-M4F based MCU — G4 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32G474RET6
CoreARM Cortex-M4F
PackageLQFP-64
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32G474RET6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-64 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M4F Core — Efficient Processing for Embedded Control

The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32G474RET6 supported by STM32CubeIDE?

Yes, the STM32G474RET6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32G474RET6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32G474RET6: 512 Kbytes of flash in the 64 pin LQFP

The order code decodes in six parts: G for general purpose, 474 for the device, R for 64 pins, E for 512 Kbytes of flash, T for the LQFP body, and 6 for the industrial range of minus 40 to plus 85 degrees C with a 105 degree junction. Reading the string that way is how a buyer checks that a reel quoted against the same family really carries the part on the board, and it is the check we make before a line is scheduled.

Under the code sits an Arm Cortex-M4 with a single precision floating point unit running to 170 MHz at 213 DMIPS, and 128 Kbytes of RAM in total: 80 Kbytes of SRAM plus 16 Kbytes in a second block, with hardware parity on the first 32 Kbytes, plus 32 Kbytes of CCM SRAM on the instruction and data bus. The figures below come from the vendor document DS12288 Rev 6.

Family figures behind the order code

CoreCortex-M4F at up to 170 MHz, 213 DMIPS, DSP and MPU
Supply1.71 V to 3.6 V on VDD and VDDA
Flash512 Kbytes with ECC, two banks read-while-write, PCROP and 1 Kbyte OTP
RAM128 Kbytes total: 96 Kbytes SRAM, 32 Kbytes CCM SRAM
Math acceleratorsCORDIC for trigonometric functions, FMAC filter accelerator
ADCFive 12-bit converters at 0.25 microsecond, up to 42 channels, 16-bit by oversampling
AnalogSeven DAC channels, seven rail to rail comparators, six op amps with PGA
TimersSeventeen, including the HRTIM at 184 ps and three advanced motor control timers
Fieldbus and serialThree FDCAN, five USART, one LPUART, four SPI, four I2C at 1 Mbit/s, USB full speed
I/OUp to 51 fast lines on this body, 107 across the family
Flash endurance10 kcycles from minus 40 to plus 105 degrees C
Package and rangeLQFP64, 10 mm by 10 mm, minus 40 to plus 85 degrees C

What two banks buy a control board

The 512 Kbyte member is the only density in this family that carries two banks with read-while-write, and that changes how a field update behaves. New code is written into the idle bank while the running application keeps executing from the other one, so a supply dip in the middle of an update leaves the product on the old image instead of on a half written page. On a pump controller or a servo drive that is indoors and hard to reach, that single feature is often the reason the 512 Kbyte part is chosen over the 128 Kbyte member.

The same array carries ECC, a proprietary readout protection and a 1 Kbyte OTP page. The OTP page is where a serial number or a calibration constant can live without a separate memory device. Endurance is 10 kcycles across the rated temperature range, and retention is 30 years at 85 degrees C after 1 kcycle, so an annual parameter write is far inside the window. Our MCU cross reference page records which densities in a family share a pinout, because moving from 128 to 512 Kbytes does not always mean a new board.

Five converters at 0.25 microsecond is a motor drive and a three phase power stage talking at once. A typical arrangement uses one converter for the three shunt currents, one for the DC bus and the heatsink sensor, one for the resolver or encoder sine and cosine pair, and leaves two for housekeeping. Oversampling takes the result to 16 bits at a lower rate when the signal is slow, which is how a temperature or a load cell reading gets its resolution without an external converter.

The six op amps can be configured as programmable gain stages in front of the converters, and VREFBUF supplies 2.048 V, 2.5 V or 2.9 V when the reference has to be better than the supply rail. The ADC and DAC cross reference page lists the families we compare when a customer needs a converter channel count that this part does not reach.

Power stage timing from the HRTIM

The high resolution timer runs six 16-bit counters at 184 ps, with twelve PWM outputs and the dead time, chopper and fault inputs needed for a synchronous buck, a full bridge or a three phase inverter. At 170 MHz a conventional timer quantises an edge to about 5.9 ns, which at a 100 kHz switching frequency is a duty step of roughly 0.06 per cent. The high resolution block removes that step, and on a digital power supply it is what keeps the output ripple repeatable when the loop demands a duty that the coarse clock cannot express.

Three FDCAN controllers cover a drive that has to talk to a motion bus and to a service tool at the same time. They are the reason this family shows up on servo amplifiers, on-board chargers and battery management masters rather than only on general control boards.

Questions that come with the first order

Is RET6 the same silicon as RET3? Yes, the same die and the same body, and the last digit is the temperature grade, 6 for minus 40 to plus 85 degrees C and 3 for minus 40 to plus 125 degrees C. Can the 128 Kbyte member be replaced by this one without a board change? On the same package it can, provided the firmware is rebuilt for the larger memory map and the option bytes are set for the density. Our incoming inspection plan records the marking, the date code and the moisture level for every reel, so a mixed delivery is caught at goods in rather than at the machine.