STM32G431CBT6
Product Specifications
STM32G431CBT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G431CBT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G431CBT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G431CBT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G431CBT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G431CBT6 supported by STM32CubeIDE?
Yes, the STM32G431CBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G431CBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G431CBT6: the 48 pin member of the G431 line
The STM32G431 family is the middle of the STM32G4 range: the same Cortex-M4F core at 170 MHz as the G474, a smaller analog set, and 128 Kbytes of flash in every density. This order code is the 48 pin LQFP body, 7 mm by 7 mm, with the B density and the industrial grade that stops at 85 degrees C ambient.
What it keeps is the part that costs money to replace: the CORDIC and FMAC accelerators, two 12-bit converters at 0.25 microsecond, fourteen timers including two advanced motor control blocks, one FDCAN controller, a USB device port, and 86 fast lines across the family. What it gives up against the G474 is converter count, CAN instances and the high resolution timer. Figures are from DS12589 Rev 6.
G431 figures for this body
| Core | Cortex-M4F at 170 MHz, 213 DMIPS, DSP and MPU |
| Flash | 128 Kbytes with ECC, PCROP, 1 Kbyte OTP |
| RAM | 22 Kbytes SRAM with parity on the first 16 Kbytes, plus 10 Kbytes CCM |
| ADC | Two 12-bit converters at 0.25 microsecond, up to 23 channels |
| DAC | Four channels, two buffered external at 1 MSPS, two internal at 15 MSPS |
| Analog support | Four rail to rail comparators, three op amps with PGA, VREFBUF |
| Timers | Fourteen, including two advanced 16-bit motor control with 8 PWM channels |
| Fieldbus and serial | One FDCAN, USART, LPUART, SPI, I2C, USB device |
| Package | LQFP48, 7 mm by 7 mm, 0.5 mm pitch |
| I/O | Up to 38 fast lines on this body, 86 across the family |
| Supply | 1.71 V to 3.6 V |
| Temperature | Minus 40 to plus 85 degrees C, 105 degree junction |
Two converters, three motors, one line of reasoning
Two converters on 23 channels looks thin next to the five of the G474, and in practice it is enough for a three phase drive with a shunt in each leg plus a bus voltage and two temperature sensors, because the converters can be interleaved and the sampling is sequenced around the PWM edges. What runs out first is simultaneous sampling: an application that needs two signals taken at the same instant, an active power factor stage and a motor at once, is better served by the G474.
The three op amps with programmable gain are the difference between a small board and a board with an external amplifier per channel. A shunt of 1 milliohm at 20 A produces 20 mV, and the internal gain stage lifts that into the useful range of the converter without an external part. Our power management cross reference page covers the gate drivers and the sensing parts we compare when the analog chain is built out.
Where the CCM block earns its 10 Kbytes
22 Kbytes of SRAM is small, and 10 Kbytes of CCM on a private bus is what keeps a fast control loop out of contention with the DMA. A current loop at 20 kHz with a 200 microsecond budget fits comfortably in 10 Kbytes, including the filter states, and leaves the main SRAM for the protocol stack and the parameter shadow. That split is the reason this family, and not a general purpose M0 part, appears on compact drives.
Code at 128 Kbytes is enough for a fieldbus stack, a motion profile and a bootloader, and it is not enough for a graphical interface. The MCU cross reference page lists the pin compatible members where that changes, so a product that later needs more code can move without a new board.
Ordering and receiving
Is the C6 density available in this family? Yes, 32 Kbytes in the same body, and the 64 Kbyte member is C8. Does the string carry the temperature grade? Yes, the 6 states minus 40 to plus 85 degrees C, and the 3 states minus 40 to plus 125 degrees C with a 130 degree junction.
The part is not automotive qualified and should not be screened to look like it. Where a customer needs AEC-Q100 the answer is a different family, and we say so rather than quoting a temperature grade as if it were a qualification. Our date code management page describes how lots are kept together in a build so that a silicon revision change does not arrive halfway through a production run.