STM32G030F6P6
Product Specifications
STM32G030F6P6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32G030F6P6 is an STMicroelectronics ARM Cortex-M0+ MCU in TSSOP-20 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G030F6P6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G0 | Series | ARM Cortex-M0+ based MCU — G0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G030F6P6 |
| Core | ARM Cortex-M0+ |
| Package | TSSOP-20 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G030F6P6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in TSSOP-20 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G030F6P6 supported by STM32CubeIDE?
Yes, the STM32G030F6P6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G030F6P6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G030F6P6: the tray version of the same 20 pin part
STM32G030F6P6 is the same die and the same TSSOP20 body as the reel string, written without the packing suffix. 32 Kbytes of flash, 8 Kbytes of SRAM, an Arm Cortex-M0+ at up to 64 MHz, and a 2.0 V to 3.6 V supply. The difference is delivery form, and that difference is the whole reason this page exists next to its reel sibling.
Small quantity builds, sample kits and repair stock usually come in trays or cut tape, while a placement line wants a full reel. Mixing the two on one purchase order is how a line ends up stopped with a tray it cannot load. The family figures below are from the ST data sheet revision dated 05-Jun-2025.
Family figures for the 20 pin member
| Core | Arm Cortex-M0+ up to 64 MHz |
| Flash | 32 Kbytes |
| SRAM | 8 Kbytes with hardware parity |
| Supply | 2.0 V to 3.6 V |
| Package | TSSOP20, 6.4 mm by 4.4 mm, 0.65 mm pitch |
| I/O | 17 general purpose lines on this body |
| ADC | 12-bit, 2.5 MSps, analog watchdog |
| Serial | Two USART, two SPI, two I2C, all DMA capable |
| Timers | Advanced control plus four general purpose 16-bit |
| Temperature | Minus 40 to plus 85 degrees C |
| Packing | Tray or cut tape unless the TR suffix is named |
Why the packing form belongs on the order
A tray part costs more per unit at volume because the reeling step is missing, and a reel part is awkward for a build of fifty boards. We have seen both mistakes: a supplier shipping trays against a line that ordered reels, and a prototype house paying reel pricing for twenty pieces. The fix is simple, name the packing form and the quantity in the same line, and check the label against the purchase order at goods in.
For customers who buy through us, the receiving check covers the label, the date code, the moisture level and the body marking, and the result is written into the incoming inspection plan record for that lot. A tray that arrives with a different date code than the reel bought the month before is a real finding, not a clerical detail, because the two may carry different firmware errata revisions.
Where this part is the right answer
Small sensor boards, relay drivers, LED controllers and panel indicators that need a few timers and one ADC channel are the natural fit. The 20 pin body is also the cheapest way to keep a two layer board inside a 30 mm by 20 mm outline, which is what most of the compact industrial sensor housings allow. Above that, the pin count runs out before the memory does, and the LQFP32 or LQFP48 member is the next step in the same family.
What it does not do is run a display, an Ethernet PHY or a second SPI device at speed, because the alternate functions collide on the same pins. Our MCU cross reference page lists which devices in the family share a pinout, so a board that later needs two more lines can move up without a full rework.
Two questions we hear every month
Is the tray part still original ST silicon? Yes, the die is the same and the marking carries the same family code; only the delivery form differs. Can it be re-reeled for a line? Yes, but the reeling is a separate operation with its own cost and its own risk of bent leads, and it is cheaper to buy the reel string if the quantity justifies it.
A third question is about the 85 degrees C ceiling: a metal enclosure in summer can reach that, and the junction runs above ambient, so a thermal check is part of the release, not a formality. The component traceability report records the lot behind each shipment so a field return can be traced back to a production window.