L9369-TR
Product Specifications
L9369-TR — Integrated Motor Driver / Smart Power Switch by STMicroelectronics
The L9369-TR is an STMicroelectronics integrated motor driver / smart power switch in - for automotive and industrial actuator control applications.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| L9369-TR | Full Part Number | STMicroelectronics Motor Driver / Power Switch |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | L9369-TR |
| Package | - |
| Type | Integrated Motor Driver / Smart Power Switch |
| Qualification | Automotive AEC-Q100 / Industrial |
Product Overview
The L9369-TR is an STMicroelectronics integrated motor driver / smart power switch in - package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.
Key Features & Benefits
VIPower Monolithic Integration — Power + Control in One Package
ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.
Comprehensive Protection & Diagnostics
Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.
Automotive-Grade Robustness
Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.
Target Applications
Drone Payload & Actuator Control
Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.
Automotive Body & Powertrain
Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.
Industrial Automation & Robotics
Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.
Frequently Asked Questions
What protection features does the L9369-TR include?
The L9369-TR features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.
Is external current sensing required?
No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics L9369-TR with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
L9369-TR: two H-bridge pre-driver stages for an electric parking brake
The L9369 is an automotive part with one job: drive the rear caliper motors of an electric parking brake. The cores are two H-bridge driver stages that between them drive eight external power NFETs, four per bridge, and the stages are configured over SPI in normal drive or in PWM control. The -TR suffix is the packing, tape and reel, on the LQFP64 body at 10 mm by 10 mm and 1.4 mm tall. An enquiry that quotes L9369 without the suffix is quoted on the tray or the tube, and a line that runs a reel feeder cannot use either.
The part is AEC-Q100 qualified and carries a functional safety concept written for ISO 26262 compliance, which is the pair of statements a tier one buyer checks before anything else. Protection is on the die: overcurrent with programmable thresholds, drain to source and gate to source monitoring with thresholds that do not depend on the external FET, and a watchdog configurable over SPI. The supply monitoring covers the main power input, with a continuous built in self test on the internal regulators and a double bandgap reference so a single reference failure cannot hide itself.
The order code and the package
| Part number | L9369, electric parking brake driver |
| Packing suffix | -TR, tape and reel |
| Package | LQFP64, 10 mm by 10 mm, 1.4 mm body |
| Qualification | AEC-Q100, functional safety concept for ISO 26262 |
| Output stages | Two H-bridge stages, 8 external NFETs |
| Pre-drivers | 4 high side and 4 low side gate drivers |
| Battery range | Full drive of the external NFETs down to 5.5 V input |
| Interface | 32 bit SPI at 10 MHz with CRC |
| Current sense | 10 fully differential amplifiers, programmable gain, self test |
| Conversion | 10 separate ADC channels, sigma delta modulators |
| Position feedback | 2 motor speed sensor interfaces for external Hall sensors |
| Discrete I/O | 4 general purpose I/O |
| Button interface | 9 configurable I/O, active in normal and sleep mode |
| Supervision | Watchdog configurable over SPI, wake up from sleep mode |
What the ten conversion channels do for a brake motor
A parking brake motor is a brushed DC motor driven through an H-bridge, and the caliper needs to know where it is. Two things give that: current, because the current rises when the caliper reaches the pad and again when it reaches the clamp force, and motor speed from the Hall sensors on the actuator. The L9369 samples motor voltage and current synchronously through ten fully differential amplifiers with programmable gain, then converts them on ten separate channels, so the current signature and the applied voltage are measured in the same instant rather than a conversion apart. On a 10 MHz SPI with a 32 bit frame the bus moves 312,500 frames a second, which is 3.2 microseconds per frame, and that is the rate at which a stall can be detected before the gearbox takes the load.
The 5.5 V battery floor is what makes the part usable during a cold crank. A 12 V system that sags to 5.5 V still has the gate drive to hold the external NFETs in enhancement, and the caliper can complete a clamp on a weak battery rather than releasing and rolling. The two configurable high side and low side stages that drive LED arrays with feedforward regulation are part of the same die, and the 9 pin button interface stays alive in sleep mode so the parking brake switch wakes the system without a separate comparator chain.
Questions that arrive with a shortage quote
Can the part drive the FETs directly? It drives the gates of external NFETs, it does not carry the motor current. The eight FETs, the shunt and the reverse battery protection are chosen by the caliper current, and the pre-driver is specified against the gate charge of those parts, so a substitution of the FET changes the switching loss and has to be checked against the drive capability.
Is the -TR suffix a different silicon? No, it is the packing. The same die ships in trays for low volume and on tape and reel for a line, and a quote that mixes the two will fail at the feeder rather than at the part.
What does the ISO 26262 statement actually give the buyer? A safety concept and the diagnostic coverage that goes with it, on a part that is AEC-Q100 qualified. It is not a certificate for the brake system: the system level safety case is assembled by the tier one, and this part supplies the pre-driver diagnostics, the supply monitoring, the watchdog and the reference redundancy that the case needs.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code with the packing suffix, and whether the order needs PPAP or a full traceability record. Send the string and we confirm date codes, origin and packing on the quotation. Automotive flow is handled through the date code management route, alternates for a long production life are covered on the obsolescence management page, and a mixed bill with the FETs, shunts and passives is picked through one stop BOM sourcing.