Contact Us

STM32G474VET6

Brand: ST
STM32G474VET6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32G474VET6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32G474VET6 — ARM Cortex-M4F Microcontroller by STMicroelectronics

The STM32G474VET6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-100 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32G474VET6Full Part NumberSTMicroelectronics ARM Cortex-M4F Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
G4SeriesARM Cortex-M4F based MCU — G4 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32G474VET6
CoreARM Cortex-M4F
PackageLQFP-100
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32G474VET6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-100 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M4F Core — Efficient Processing for Embedded Control

The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32G474VET6 supported by STM32CubeIDE?

Yes, the STM32G474VET6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32G474VET6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32G474VET6: 100 pins, 512 Kbytes and the memory bus

The V in this order code is the 100 pin LQFP body, 14 mm by 14 mm with a 0.5 mm pitch, and the E is the 512 Kbyte flash density. The part is the widest member of the STM32G474 family that still uses a leaded package, which is why it appears on boards that need a lot of lines but do not want a ball grid array in the assembly process.

What the extra pins buy is not only more general purpose lines. The 100 pin body brings out the flexible static memory controller for SRAM, PSRAM, NOR and NAND devices, more ADC channels, and the second CAN instance on dedicated pins instead of a shared alternate function. On a control board that has to log to external memory while it runs a motor, that combination decides the package. Figures are from DS12288 Rev 6.

What the larger body adds

CoreCortex-M4F at up to 170 MHz, 213 DMIPS
Flash and RAM512 Kbytes with ECC in two banks, 128 Kbytes of RAM including 32 Kbytes CCM
PackageLQFP100, 14 mm by 14 mm, 0.5 mm pitch
I/OUp to 86 fast lines on this body, 107 across the family
External memoryFlexible static memory controller for SRAM, PSRAM, NOR and NAND
Quad SPIOne interface for external flash or RAM at up to 133 MHz
ADCFive 12-bit converters, 42 channels on the largest bodies
DAC and analogSeven DAC channels, seven comparators, six op amps with PGA
TimersHRTIM at 184 ps, three advanced motor control, two 32-bit general purpose
FieldbusThree FDCAN controllers, five USART plus LPUART, four SPI, four I2C
Flash endurance10 kcycles, retention 15 years at 85 degrees C after 10 kcycles
TemperatureMinus 40 to plus 85 degrees C, 105 degree junction

Where the external bus earns its pins

A 512 Kbyte array with dual bank update is generous for code, and it is still small for a data log at 10 kSamples per second across eight channels. The static memory controller answers that with a parallel bus to an external SRAM or a NOR device, and the quad SPI answers it with a serial part that costs fewer pins. The two options behave differently: the parallel bus gives a predictable access time that a real time loop can budget, while the serial interface trades latency for pin count and board space.

The channels that come with the 100 pin body are the other reason to move up. Forty two converter inputs are enough for three phase current on two inverters, a resolver pair, four temperature sensors and a set of diagnostic dividers, all sampled without an external multiplexer. The pin to pin cross reference page records which of the smaller bodies share this pinout, because the 64 pin part is not a subset of this one in every position.

Assembly of a 100 pin LQFP

A 0.5 mm pitch leaded package is the most forgiving fine pitch body there is. It reflows on a standard stencil with a 0.12 mm foil, it can be inspected optically without an X-ray turn, and it can be reworked by hand when a prototype needs one part changed. That matters more than the unit price when a product is at the pilot stage, and it is one of the reasons customers stay on this body instead of moving to a BGA once volumes rise.

The exposed thermal path is through the leads and the die pad, so the copper under the body still sets the junction temperature. At 170 MHz with the five converters running, the device draws well over 100 mA, and a board that sits in a sealed housing needs the copper pour and the via field planned from the first article. Our component traceability report ties each shipment to its vendor lot, which is what an audit asks for when a temperature related field return appears.

Ordering questions for this string

Does the V body exist with 128 Kbytes? Yes, STM32G474VBT6 is the same 100 pins with the smaller array, and the pinout is identical. Is the A option part of this code? No, an A before the packing suffix marks the advanced mission profile rated for the higher internal voltage scaling, and the plain string here runs the standard profile. Can this part drive an external SDRAM? Not with the static controller alone, the synchronous dynamic memories belong to the H7 family, and the honest answer is to move the board to that line rather than to add a controller to this one.

The MCU cross reference page sets out the steps between the G4 and H7 families in the terms that matter to a purchase decision: package, memory, peripheral count and the firmware work each move carries.