STM32G030C8T6
Product Specifications
STM32G030C8T6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32G030C8T6 is an STMicroelectronics ARM Cortex-M0+ MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G030C8T6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G0 | Series | ARM Cortex-M0+ based MCU — G0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G030C8T6 |
| Core | ARM Cortex-M0+ |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G030C8T6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G030C8T6 supported by STM32CubeIDE?
Yes, the STM32G030C8T6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G030C8T6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G030C8T6: 64 Kbytes of flash in the 48 pin LQFP body
STM32G030C8T6 is the largest memory member of the STM32G030 family in the LQFP48 body, 7 mm by 7 mm with a 0.5 mm pitch. The core is an Arm Cortex-M0+ at up to 64 MHz, the flash is 64 Kbytes and the SRAM is 8 Kbytes with hardware parity. It sits above the 32 Kbyte members of the same family and below the G070 parts that carry 128 Kbytes and four USARTs.
Choosing between those two is the decision most of our customers bring to us with a BOM line. The tables here are read from the ST family data sheet, revision dated 05-Jun-2025, and the peripheral counts are the ones printed for the x8 members rather than for the smaller x6 devices.
The electrical picture in one table
| Core | Cortex-M0+ at up to 64 MHz |
| Supply | 2.0 V to 3.6 V, POR and PDR on chip |
| Flash | 64 Kbytes with readout protection |
| SRAM | 8 Kbytes with parity check |
| ADC | 12-bit, 2.5 MSps, up to 19 channels, analog watchdog |
| Serial | Two USART with ISO7816, LIN and IrDA, two SPI, two I2C |
| Timers | One advanced control 16-bit, four general purpose 16-bit, two watchdogs |
| DMA | Five channels plus request multiplexer |
| Low power | Sleep, Stop and Standby, VBAT pin for RTC and backup registers |
| I/O | Up to 44 fast I/O on the family, several 5 V tolerant |
| Temperature | Minus 40 to plus 85 degrees C |
| Package | LQFP48, 7 mm by 7 mm, 0.5 mm pitch |
Where the extra flash goes
The 32 Kbyte member of this family runs a bare metal control loop comfortably and runs out of room as soon as a bootloader, a Modbus stack and a calibration table share the same array. The 64 Kbyte part keeps the same core, the same supply window and the same peripheral set, and adds room for the second image and the parameter page. For a product that must support field update over UART, that difference decides the order code.
Pins are the other half. The 48 pin body breaks out 43 general purpose lines on this family, which is enough for a three phase gate driver, an encoder input, two serial ports and a display header at the same time. The 20 pin body does not reach that count, and the jump from 20 to 48 pins is the reason most control boards in production sit in this package. Our pin to pin cross reference page is where we record which of those moves need a board change and which do not.
Reception and second source notes
The 2.0 V floor means a 3.3 V rail with five percent tolerance stays inside the window, and a 1.8 V rail does not. The ADC reference is taken from VDDA, so a noisy regulator shows up directly in the conversion result, and the analog watchdog is only useful if the reference itself is clean. We flag that on the incoming sheet rather than leaving it to the first article.
A second source for this body is not a drop in. The register map and the clock tree belong to the G0 line, and a part from another vendor needs a rebuild of the low level layer, not only a new order code. Where a customer is looking at a shortage, the BOM shortage recovery page describes how we present the options with the work each one carries.
Common questions on this string
Does the C8 code mean 64 Kbytes? Yes, C8 is the 64 Kbyte member of the family; C6 is 32 Kbytes in the same body, and the two share every other figure in the table above. Is the temperature range the same as the automotive grade? No, this string stops at 85 degrees C and carries no AEC qualification, and a request that needs either one should be quoted on a different family.
What does the T6 suffix state? It is the LQFP48 body in the industrial temperature range, and the package and the range travel together in the order code. The component traceability report lists that decode for every lot we ship, so a receipt check does not depend on memory.