STM32WLE5CCU6
Product Specifications
STM32WLE5CCU6 — ARM Cortex-M4 Microcontroller by STMicroelectronics
The STM32WLE5CCU6 is an STMicroelectronics ARM Cortex-M4 MCU in UFQFPN-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32WLE5CCU6 | Full Part Number | STMicroelectronics ARM Cortex-M4 Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| WL | Series | ARM Cortex-M4 based MCU — WL series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32WLE5CCU6 |
| Core | ARM Cortex-M4 |
| Package | UFQFPN-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32WLE5CCU6 is an STMicroelectronics ARM Cortex-M4 microcontroller in UFQFPN-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4 Core — Efficient Processing for Embedded Control
The ARM Cortex-M4 core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32WLE5CCU6 supported by STM32CubeIDE?
Yes, the STM32WLE5CCU6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32WLE5CCU6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32WLE5CCU6: a 256 Kbyte LoRa radio and an M4 on one die
This is a single chip that carries a sub-GHz radio and a Cortex-M4 with 256 Kbytes of flash and 64 Kbytes of SRAM, in a 7 mm by 7 mm UFQFPN48. The order code reads WLE5 for the wireless subfamily, C for the 256 Kbyte density, U for the UFQFPN body and 6 for the industrial temperature range. The same family ships in 64 and 128 Kbyte densities and in a 5 mm by 5 mm UFBGA73, and the die is the same, so the choice is about memory and about how the board is assembled rather than about radio performance.
The radio covers 150 MHz to 960 MHz with LoRa, (G)FSK, (G)MSK and BPSK modulation, transmits up to plus 22 dBm and receives at minus 148 dBm in LoRa at spreading factor 12. Those two numbers together are a link budget of 170 dB before antenna gain and cable loss, which is what makes a battery sensor readable across a plant or a field without a repeater. Figures are from the STM32WLE5xx data sheet.
Radio and core in one table
| Frequency range | 150 MHz to 960 MHz |
| Modulation | LoRa, (G)FSK, (G)MSK, BPSK |
| Receiver sensitivity | Minus 148 dBm LoRa at spreading factor 12, minus 123 dBm for 2-FSK at 1.2 kbit per second |
| Transmit power | Up to plus 22 dBm on the high power path, up to plus 15 dBm on the low power path |
| Transmit current | 15 mA at 10 dBm, 87 mA at 20 dBm in LoRa at 125 kHz bandwidth |
| Receive current | 4.82 mA in active receive |
| Core current | Below 72 microamps per MHz in active mode, CoreMark |
| Shutdown current | 31 nA at 3 V, standby with RTC 360 nA |
| Core | Cortex-M4 at 48 MHz with DSP instructions and an ART accelerator, 1.25 DMIPS per MHz |
| Memory | 256 Kbytes of flash, 64 Kbytes of SRAM |
| Supply | 1.8 V to 3.6 V, with a smart switch between the SMPS and the LDO |
| ADC | 12 bit at 2.5 Msamples per second, up to 16 bit with oversampling |
| Analog | Two ultra low power comparators, internal reference buffer |
| Security | AES 256 bit, true random number generator, PCROP, RDP and WRP, 64-bit unique ID |
| Package | UFQFPN48, 7 mm by 7 mm, or UFBGA73, 5 mm by 5 mm |
Where the 22 dBm goes and what it costs
The high power path is a separate amplifier with its own matching, and the current step between 10 dBm and 20 dBm is 15 mA against 87 mA. On a sensor that reports once an hour the average is dominated by sleep, not by transmit, so the high power setting is nearly free. On a device that reports every ten seconds the arithmetic reverses, and the same 72 mA of extra transmit current becomes the largest term in the budget. That is a decision made in firmware, but the regulator and the decoupling have to be sized for the worst case either way.
Above about 14 dBm the matching network stops being a simple balun. ST publishes integrated passive devices for this family, one for 915 MHz at 22 dBm, one for 868 MHz at 14 dBm and one for 490 MHz at 17 dBm, each of which puts the balun, the harmonics filter and the matching into a single part. Using one removes a handful of passives and a tuning step at production test, and it fixes the band, so it has to be chosen against the market the product ships to rather than after the antenna is picked.
At 900 MHz the ground plane under the module is part of the radio. A quarter wave monopole needs a counterpoise of at least a quarter wave, and a product that mounts the module in a metal box with a wire out of the side will measure 6 to 10 dB worse than the bench result. The practical arrangement is a ground plane that extends at least 20 mm beyond the module on the antenna side, a matching network within a few millimetres of the pin, and no copper on the layer above that network. Each of those is a mechanical decision as much as an electrical one, and it is cheaper to agree at the enclosure review than to retune a board that is already tooled.
Regulatory conformance is not a datasheet row. The document lists compliance with ETSI EN 300 220, EN 300 113 and EN 301 166, with FCC part 15, 24 and 90, and with the Japanese ARIB standards, and it is the duty cycle and the power limit of the destination market that decide the final configuration. A product that passes at 14 dBm in Europe may need the full 22 dBm in a market with a wider channel, and the same board can serve both if the power is set by the firmware image.
The digital side is not an afterthought
An M4 at 48 MHz with an ART accelerator runs a LoRaWAN stack, a sensor acquisition loop and an AES session without an external memory device, and 64 Kbytes of SRAM holds the stack buffers, the frame queue and the application state at the same time. The 12-bit converter at 2.5 Msamples per second reads a bridge or a thermocouple front end directly, and the two comparators can wake the core on a threshold without a conversion, which is how a door sensor or a level switch stays at 360 nA.
The radio configuration is set per market. Duty cycle, power limit, bandwidth and channel plan differ between Europe, North America and Japan, and the same hardware has to produce a different image for each. Holding those values in a parameter block rather than in the binary is what allows one reel of parts to serve three orders, and it is the reason the flash density matters more than the core clock on a product with regional variants.
The smart switch between the SMPS and the LDO is worth knowing about at the board drawing stage. In transmit the SMPS carries the pulse and keeps the cell voltage from sagging, and in receive the LDO gives the quieter rail that the sensitivity figure assumes. The switch is automatic and it is the reason the part can hold minus 148 dBm while running from a coin cell. Our RF component sourcing page covers the passives and the TCXO that go around a radio like this, because the reference clock and the matching are where a board either meets its sensitivity or loses 6 dB.
Checks before the order
Is the 256 Kbyte density needed? A LoRaWAN class A sensor with a region table and a bootloader fits in 128 Kbytes comfortably, and the C density is the one to quote when the application has a firmware update slot and a data log. Does the part need an external TCXO? The radio accepts a crystal, and the document describes TCXO support with a programmable supply, which is what a gateway or an outdoor node uses when the temperature swing is wider than a crystal can hold.
Is the 5 mm by 5 mm ball grid array an option on the same board? No, the pinout and the land pattern differ, so the body is chosen with the assembly process and not afterwards. Our pin to pin cross reference page records which members of a wireless family share a footprint, and which only share a die. The integrated passive devices are a third case: they are keyed to a band and a power level, so a product that ships to two regions needs two of them, and their lead time is worth checking at the quotation stage rather than at the pilot run.
A radio product also needs its matching network and its reference clock held against a second source, and our one stop BOM sourcing page covers how that pair is kept qualified. The integrated passive devices are a third case: they are keyed to a band and a power level, so a product that ships to two regions needs two of them, and their lead time belongs in the quotation rather than in the pilot run.