Contact Us

STM32F217IGH6

Brand: ST
ST STM32F217IGH6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32F217IGH6 — MCU & Embedded Processors | Superb Automation

STM32F217IGH6

ST — MCU & Embedded Processors

Product Overview

The STM32F217IGH6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32F217IGH6: 1024 Kbyte, UFBGA176 body

STM32F217IGH6 is a member of the STM32F215 and STM32F217 performance line with cryptographic acceleration described by DocID17050 Rev 13. The order code fixes 1024 Kbytes of Flash, 128 Kbytes of SRAM, the UFBGA176 body at 10 x 10 mm with 176 pins, 140 general purpose I/O and 16 external channels on each of the 12 bit converters, and the core runs at up to 120 MHz from a 1.8 to 3.6 V supply.

Order code and memory

Order codeSTM32F217IGH6
Program Flash1024 Kbytes
SRAM128 Kbytes
PackageUFBGA176, 10 x 10 mm, 176 pins
Maximum general purpose I/O140
Analog input channels16 external channels per converter
Digital to analog converternot present
External memory controllerfull flexible static memory controller with four chip selects on this 176 ball body
Supply voltage1.8 to 3.6 V
Maximum CPU clock120 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient, 105 C junction
DatasheetDocID17050 Rev 13

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 120 MHz with the adaptive real time accelerator, 1.25 DMIPS per MHz, 150 DMIPS, a memory protection unit and single cycle multiply and divide
Clock sources4 to 26 MHz high speed external crystal, 16 MHz factory trimmed internal RC, 32.768 kHz low speed internal and external sources, a main PLL and a separate audio PLL for the I2S blocks
Timerstwo advanced-control 16 bit timers with complementary outputs and dead time, four full featured general purpose timers of which TIM2 and TIM5 are 32 bit, six further general purpose 16 bit timers, two basic timers, the independent and window watchdogs, the SysTick counter and the RTC, which is the seventeen the cover counts
Serial interfacesthree SPI blocks two of which mux to I2S, three I2C blocks, four USARTs and two UARTs, two CAN 2.0B active controllers and one SDIO interface
DMAtwo DMA controllers with eight streams each and a FIFO per stream, sixteen streams in total, with circular buffer support
ADCthree 12 bit successive approximation converters with a 0.5 microsecond conversion time, each sharing up to 16 external channels, up to 24 channels across the three on the larger bodies and up to 6 Msps in triple interleaved mode
DACtwo 12 bit channels with output buffers
Ethernet10/100 MAC with dedicated DMA, MII or RMII, IEEE 1588 timestamping
Camera interfaceparallel camera interface, 8 to 14 bit, up to 48 Mbyte per second, with its own DMA
Cryptographic accelerationAES 128, 192 and 256 bit, Triple DES and a HASH unit for MD5 and SHA-1, plus an analog true random number generator
Programmable voltage detectorprogrammable voltage detector with selectable thresholds, plus power on reset, power down reset and brownout reset
Debug portserial wire debug and JTAG, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC, the 4 Kbytes of backup SRAM and the backup registers alive with the main rail off
Flash endurance and retention10 kcycles at minus 40 to plus 85 C and 1 kcycle at 105 C, with 30 years of retention at 85 C after one kcycle, 20 years at 55 C after 10 kcycles and 10 years at 105 C
Thermal resistance junction to ambient39 C/W on this package
Input tolerancealmost all inputs 5 V tolerant, with fast I/O toggling to 60 MHz on the larger bodies
USBone OTG full speed port on the device pins and one OTG high speed port that needs an external ULPI PHY
Statusproduction data per the datasheet cover

Points to check before this part goes on a BOM

The I in the order code is the 176 ball UFBGA at 10 x 10 mm and 0.5 mm pitch, the same body as the STM32F207IGH6 with the cryptographic block added. Because the pinout matches the F207 part, a board that later needs hardware encryption can be reworked onto this device, which is a common reason to start from the 176 ball body in the first place.

The cryptographic block is a hardware accelerator for AES with 128, 192 and 256 bit keys, for Triple DES and for a HASH unit computing MD5 and SHA-1, and it works with the analog true random number generator on the same die. It does not replace a secure element for key storage, so the key handling approach still has to keep keys out of Flash or in a protected region, and the block accelerates the algorithm rather than protecting the secret.

The 176 ball body is the only one in the range that carries the memory controller, Ethernet, a 14 bit camera interface and the cryptographic block with enough pins left for a wide bus. Ports E, F and G are all bonded here, so the four chip selects, the RMII or MII interface and the camera data lines can be assigned without the collisions that the 100 pin body forces.

A 10 x 10 mm ball grid with 0.5 mm pitch needs X-ray or automated optical inspection after reflow, and it needs the pad geometry and the stencil aperture to be right the first time because rework is expensive. Boards that can afford 24 x 24 mm should compare the LQFP176 version of the same part before committing to the ball grid, since the electrical behaviour is identical and the assembly is simpler.

The 39 C/W of this package gives about 510 mW at 85 C ambient, and the cryptographic block adds a current term that only appears when it is active. AES encryption of a data stream at the rate the block supports draws more than the core does at 120 MHz, so a gateway that encrypts continuously should be thermally modelled with the crypto block running, not idle.

Where this order code fits

It is the top of the STM32F21x range, 1 Mbyte of Flash, 140 pins and the cryptographic block in a 10 x 10 mm ball grid, for secure gateways and networked equipment that has to authenticate traffic in hardware. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Does this part include the random number generator? Yes. The analog true random number generator is part of the STM32F21x line along with the AES and HASH blocks. It produces the seed material, and the AES block performs the encryption with a key the firmware supplies.

Is the pinout the same as STM32F207IGH6? Yes. The two devices share the 176 ball UFBGA pinout, so a board built for the F207 can be reworked onto this part to add hardware encryption without changing the footprint.

What camera data widths does this body support? 8, 10, 12 and 14 bit parallel data at up to 48 Mbyte per second, because all of port C, port D and port E are bonded on the 176 ball package. The narrower bodies cannot carry the upper data bits.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.