Contact Us

BQ24735RGRR

Brand: Texas Instruments
Texas Instruments BQ24735RGRR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

BQ24735RGRR — Power Management & Signal Chain | Superb Automation

BQ24735RGRR

Texas Instruments — Power Management & Signal Chain

Product Overview

The BQ24735RGRR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

BQ24735RGRR: SMBus charge controller with N-channel power path selection in a 3.5 mm VQFN

BQ24735RGRR is a host controlled synchronous buck charger for one to four cells that also selects between adapter and battery as the system source in a VQFN body of 20 pins. Two charge pumps drive the adapter FET, the reverse blocking FET and the battery FET separately, so the system can run from the adapter, from the battery, or from both at once. Every limit is set over SMBus by the host, which is what allows the current and voltage to follow a power policy rather than a resistor value.

Order code and package

BQ24735RGRRVQFN RGR, 20 pins, 3.5 mm by 3.5 mm, 3000 pieces on a large reel, Level-2-260C-1 YEAR, marking BQ735
BQ24735RGRTsame body, 250 pieces on a small reel, marking BQ735
BQ24735RGRR.A and .Blabel rows on the same reel size, one carrying a tin finish and one nickel gold
Temperatureminus 40 to plus 85 C operating free air temperature
Battery range1 to 4 cells in series, with the charge voltage set by the host up to 19.2 V
Supplyadapter input 4.5 V to 24 V, with the system and battery nodes switched by external N-channel FETs

Electrical parameters that decide the application

Charge voltage accuracyplus or minus 0.5 per cent up to 19.2 V, which is the tightest figure in the family
Charge current accuracyplus or minus 3 per cent up to 8.128 A
Input current accuracyplus or minus 3 per cent up to 8.064 A
Current sense amplifiera 20 times gain output with plus or minus 2 per cent accuracy, for adapter or charge current
Switching frequency615 kHz, 750 kHz or 885 kHz, chosen by register
Off state battery current5 uA with the adapter removed, which is what a docked product sees overnight
Adapter standby current0.65 mA typical and 0.8 mA maximum with the adapter present and no charge
Control interfaceSMBus with a digital to analogue converter for each limit, so the host sets the numbers
Safety functionsinput overvoltage, overcurrent, battery short, inductor short and FET short detection, plus a programmable depletion threshold

Family variants and how they differ

Power pathACFET, RBFET and BATFET are N-channel devices driven by two charge pumps, so no P-channel FET is needed
Turbo boostthe battery and the adapter supply the system together so a CPU can exceed the adapter rating for a short interval
LEARN functionthe pack can be discharged and recharged on command, for a host that wants to recalibrate its gauge
ILIM pinan analogue input that caps the charge current in real time, independent of the register
Depletion thresholda programmable low battery level at which the system is shut off rather than the pack being over discharged
RGR body20 pins at 3.5 mm by 3.5 mm, the same body used by the wider controller family

Points to check before this part goes on a BOM

Every limit comes from the host, so a host that fails to program leaves the charger unconfigured. The registers are volatile and come up at zero after power on, which means no charge until the host writes the voltage and current. A product that reports a charger that does nothing at cold start is usually looking at a host that booted without configuring it.

Turbo boost is a power path behaviour and not a charge mode. The battery discharges into the system while the adapter keeps supplying its limit, which keeps the adapter from collapsing when the processor asks for more than the adapter can give. It needs the battery FET to be on and the depletion threshold to be set, or the product will shut down at the end of the transient instead of recovering.

Point five per cent at 19.2 V is tight enough that the sense point decides the result. The voltage is measured at the battery node after the FETs, and a trace shared with the charge current adds an error that changes with load. The Kelvin connection from that node to the sense pin is not optional at this accuracy.

Three switching frequencies cover three inductor sizes. At 615 kHz the inductor is large and the loss is conduction dominated, at 885 kHz it is small and the loss is switching dominated. The register choice is made once and the compensation inside the part is fixed, so a frequency change without an inductor change gives a converter that is stable but inefficient.

Five microamps off state is the number that decides a docked product. A notebook that sits in a drawer with the adapter removed still drains through the battery FET leakage and the sense divider, and the total is what the product's shelf life is built from. The charger is one contributor and the rest of the board is the other.

The depletion threshold protects the pack, not the product. It shuts the system down at a programmed battery level so the pack is not taken below its protection point, which is a different number from the point at which the system stops working. A product that sets both the same will either shut down early or lean on the pack protector.

Where the power path goes wrong

The reverse blocking FET is the part that fails a plug event. If it is slow to turn off, the adapter and the battery fight for a few microseconds and the current limit trips, which the host sees as an adapter removal.

The second is the battery FET body diode. A pack that is inserted backwards or a system that is powered from the battery while the adapter is absent relies on that diode until the FET turns on, and the drop across it appears as a lower system rail at the moment of highest load.

What a build needs in the record

The order code, the reel size and the date code, because the A and B label rows of this body carry different finishes and the marking is the same. A build that mixes them will pass electrical test and fail an incoming finish check.

The SMBus register set used by the host also belongs in the record. Two products built on the same board with different limits are two different configurations, and a repair that restores the wrong one changes the charge behaviour.

Where this order code fits

Notebook computers, ultra thin portables, netbooks, handheld terminals and portable industrial or medical equipment use this controller class, because the system source has to switch between an adapter and a pack without a glitch, and the charge limits have to follow a policy that only the host knows. The turbo boost path is what allows a small adapter to serve a processor with a short high current demand. Teams comparing it with a neighbouring part start from our Power Management Cross Reference page, and teams replacing a part that has gone end of life start from the Medical Device Components page.

Questions buyers ask

Does this part charge without a host? No. The voltage and current limits come from SMBus registers, and the part comes up with them at zero. A stand alone product needs a charger with resistor set limits instead of this one.

What is turbo boost used for? It lets the system draw from the battery while the adapter is at its limit, so a processor can run a short burst above the adapter rating without the adapter dropping out. The pack pays for the burst, so the depletion threshold has to leave room for it.

Why are there two charge pumps? One drives the adapter and reverse blocking FETs, the other drives the battery FET. Separating them keeps the battery path controlled when the adapter is absent, which is the case where the system has to run from the pack alone.

Is 8.128 A a real charge current for a portable product? It is the top of the converter range and it suits a multi cell pack with a large adapter. Most portable products run well below it, and the register resolution is fine enough that the limit can be set to what the pack actually wants.

What does the 20 times amplifier give the host? A voltage proportional to the adapter or charge current that the host can read with its own ADC, which is how a power policy measures consumption without a second sense resistor.

SUPERB holds and sources this line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a part is moving, the How to Reduce Component Cost page sets out the checks that keep a substitute from failing on the bench.