STM32F101VET6
Product Specifications
STM32F101VET6
ST — MCU & Embedded Processors
Product Overview
The STM32F101VET6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32F101VET6: 512 Kbyte, LQFP100 body
STM32F101VET6 is a member of the STM32F101 access line high density described by DocID14610 Rev 9. The order code fixes 512 Kbytes of Flash, 48 Kbytes of SRAM, the LQFP100 body at 14 x 14 mm with 100 pins, 80 general purpose I/O and 16 channels of the 12 bit converter, and the core runs at up to 36 MHz from a 2.0 to 3.6 V supply.
Order code and memory
| Order code | STM32F101VET6 |
| Program Flash | 512 Kbytes |
| SRAM | 48 Kbytes |
| Package | LQFP100, 14 x 14 mm, 100 pins |
| Maximum general purpose I/O | 80 |
| Analog input channels | 16 of the 12 bit converter |
| Digital to analog converter | 2 channels of 12 bits |
| External memory controller | flexible static memory controller, bank 1 for multiplexed NOR and PSRAM and bank 2 for 16 or 8 bit NAND |
| Supply voltage | 2.0 to 3.6 V |
| Maximum CPU clock | 36 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient, 105 C junction |
| Datasheet | DocID14610 Rev 9 |
Peripheral and electrical parameters
| Core | ARM Cortex-M3 at up to 36 MHz, 1.25 DMIPS per MHz, single cycle multiply and divide |
| Clock sources | 8 MHz factory trimmed internal RC, PLL up to the 36 MHz core clock, external crystal on the high speed oscillator |
| Timers | one advanced-control 16 bit timer, four general-purpose 16 bit timers with four compare channels each and two basic timers, which with the two watchdogs is the nine the cover counts |
| Serial interfaces | five USARTs, three SPI blocks and two I2C blocks |
| DMA | 12 channel DMA controller |
| ADC | 12 bit successive approximation, 16 channels, conversion range 0 to 3.6 V |
| DAC | 2 channels of 12 bits with output buffers |
| Programmable voltage detector | eight falling thresholds from 2.00 V to 2.88 V nominal, each with a rising edge about 100 mV higher |
| Debug port | serial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits |
| Backup domain | VBAT domain keeps the RTC, the backup registers and the tamper input alive with the main rail off |
| Flash endurance and retention | 10 kcycles at minus 40 to plus 85 C, 30 years of retention at 85 C after one kcycle and 20 years at 55 C after 10 kcycles |
| Thermal resistance junction to ambient | 45 C/W on this package |
| Input tolerance | almost all inputs 5 V tolerant |
| USB | not present, USB full speed is the STM32F102 line |
| Status | production data per the datasheet cover |
Points to check before this part goes on a BOM
This is the access line at its widest: 512 Kbytes of Flash, 48 Kbytes of SRAM, five USARTs, three SPI blocks, two I2C blocks, 16 converter channels, the two 12 bit DAC channels and a memory controller with two usable banks on the 100 pin body. Bank 1 drives a multiplexed NOR or PSRAM device on the NE1 chip select and bank 2 drives a 16 or 8 bit NAND device on NCE2. The interrupt line from the NAND cannot be used because port G is not available on 100 pins, which is the detail that catches a board that assumed a ready signal.
The 48 Kbytes of SRAM is the largest in the family and it is what makes the two banks usable. A NAND page buffer of 2 Kbytes, a NOR or PSRAM window and the serial buffers all coexist here, which is not true on the 32 Kbyte codes. On a part used as a data recorder, that is the difference between staging a page in internal memory and reading it back in pieces.
The 36 MHz core with 12 channel DMA and a NAND bank is a combination aimed at instruments and data loggers. The core runs the file system and the serial protocols while the DMA moves the converter results and the memory bus traffic. Work that needs more arithmetic is the STM32F103 line at 72 MHz, and work that needs USB is either the F102 line or the F103 line, since the access line has no USB peripheral at any density.
Five USARTs are worth counting carefully, because they are all asynchronous and the line has no separate UART block. A host link, a service port, a field bus, a radio module and a modem is five, and on a 100 pin body they can usually all be brought out. The SPI blocks then serve the display, a serial Flash and a sensor, and the I2C blocks cover an EEPROM and a monitor, which is what a full instrument enclosure needs.
The two DAC channels are buffered and share pins with converter inputs, so a board using both costs two of the 16 analog channels. On an instrument that also wants a bias voltage and a setpoint, that trade is usually acceptable, and the alternative is an external converter on one of the three SPI blocks. The accuracy of the internal pair follows the analog supply, so a quiet reference and a local capacitor at the supply pin matter more than the converter specification.
At 45 C/W on the LQFP100 body the junction rises 20 C above an 85 C ambient at about 445 mW. A part driving 80 I/O with a NAND bus and five serial ports is the case where the I/O and bus switching are a real share of that budget, and the exposed pad soldered into a ground plane with vias is what makes the datasheet figure achievable. The alternative is a lower ambient or a bigger package, and the 144 pin body has a lower thermal resistance.
Flash endurance is 10 kcycles at minus 40 to plus 85 C, with 30 years of retention at 85 C after one kcycle and 20 years at 55 C after 10 kcycles. On a part with a NAND bank, the wear levelling belongs on the external device and the program Flash holds the code, which keeps the endurance budget for firmware updates alone. The option bytes and read out protection are set at the same time as the boot configuration, and all three should be in the production plan.
Where this order code fits
It is the 512 Kbyte, 48 Kbyte access line part with both memory banks, used where a board needs a NAND device and a NOR or PSRAM device at the same time and a 36 MHz core. Boards comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Component Lead Time Solutions page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
What can the two memory banks drive? On the 100 pin body, bank 1 drives a multiplexed NOR or PSRAM device through the NE1 chip select and bank 2 drives a 16 or 8 bit NAND device through NCE2. The NAND ready and interrupt line is not available because port G is absent on this package.
Does this part have USB? No. The STM32F101 access line has no USB peripheral at any density. USB full speed is the STM32F102 line on lower memory sizes or the STM32F103 line, which also raises the core to 72 MHz.
How does it compare with the STM32F100VE in the same package? The F101 part has a 36 MHz core and 48 Kbytes of SRAM against 24 MHz and 32 Kbytes, and both banks of the memory controller against bank 1 only. The F100 part has the value line timer set with ten general purpose timers, which on the F101 is four general purpose timers plus two basic ones alongside the advanced-control timer.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Obsolete Part Cross Reference Hub page sets out the checks that keep a substitute from failing on the bench.