Contact Us

CD4073BM96

Brand: Texas Instruments
Texas Instruments CD4073BM96 is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

CD4073BM96 — Power Management & Signal Chain | Superb Automation

CD4073BM96

Texas Instruments — Power Management & Signal Chain

Product Overview

The CD4073BM96 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

CD4073BM96: the triple three input AND gate on a 2500 piece SOIC reel

The CD4073BM96 is the large tape and reel entry for the CD4073B, three independent three input AND gates in a 14-lead small outline body. The vendor page lists the device as ACTIVE with the descriptor 3-ch, 3-input, 3-V to 18-V AND gates, a drive of 6.8 mA in both directions, an 8 Mbps data rate and an operating range of minus 55 to plus 125 degrees. The reel row is 2500 pieces, level 1 at 260 degrees, nickel palladium gold finish, and the marking on the body is CD4073BM rather than the orderable string.

Three gates of three inputs is a narrow function and the family shows it. The same document covers the CD4081B quad two input AND and the CD4082B dual four input AND, so a customer who needs an AND function has three shapes to choose from on one addendum, and the choice is made by how many inputs have to be combined and how many separate outputs are needed. Nine inputs in one package is efficient when the three results stay separate, and wasteful when only one result is used.

The CD4073B rows as the addendum publishes them

Part classThree independent three input AND gates
Vendor descriptor3-ch, 3-input, 3-V to 18-V AND gates
Vendor statusACTIVE, catalogue rating
Data sheetSCHS054 family document, acquired from Harris Semiconductor
Package addendum date18 September 2026
Supply range3 V to 18 V, 20 V type rating in the headline
Output drive6.8 mA sink and source at 15 V
Data rate8 Mbps in the parametric table
Propagation delay60 ns typical at 10 V
Input thresholds at 5 VLow 1.5 V maximum, high 3.5 V minimum
Input thresholds at 10 VLow 3 V maximum, high 7 V minimum
Input current1 microamp at 18 V over temperature, 100 nA at 25 degrees
Noise margin1 V at 5 V, 2 V at 10 V, 2.5 V at 15 V
SOIC body14 leads, 51.9 square millimetres, 8.65 by 6 mm
SOIC tube rowCD4073BM, Obsolete, blank quantity, Call TI
SOIC reel rowCD4073BM96, 2500 pieces, Active
Small reel rowCD4073BMT, Obsolete
SOP reel rowCD4073BNSR, 2000 pieces, Active
TSSOP rowsCD4073BPW tube Obsolete, CD4073BPWR reel 2000 Active
PDIP rowCD4073BE, 25 pieces in a tube, Active
Ceramic rowsCD4073BF NRND, CD4073BF3A Active with marking 7705102CA
Family companionsCD4081B quad AND and CD4082B dual four input AND

The one row that matters beyond the reel is the ceramic pair. The BF row is NRND and the BF3A row is active, they differ by one suffix, and a defence customer who names the wrong one gets a part the vendor has flagged. The metal can footprint is the same, so nothing on the board catches the mistake; only the purchase order does. That is the kind of pair this page exists to separate.

What the parametric table fixes

The three gates are specified over 3 to 18 V with parametric ratings at 5, 10 and 15 V. The input thresholds are the sharpest numbers in the table: at a 5 V rail an input is guaranteed low below 1.5 V and guaranteed high above 3.5 V, which is 30 and 70 per cent of the rail. At 10 V the band widens to 3 V and 7 V, and at 15 V to 4 V and 11 V. Anything between those limits is undefined, and a slow RC edge that spends a millisecond in the middle is where a CMOS gate draws its crowbar current.

Drive is 6.8 mA at 15 V and the typical propagation is 60 ns at 10 V into a 50 pF load. A three input gate has three times the input capacitance of a single input, so a chain of these gates loads the previous stage more than the delay figure suggests. The 8 Mbps data rate in the parametric table is a family entry and it is not reachable through several gate stages.

The quiescent current at 20 V is 5 microamps maximum in the cold corner and 150 microamps in the hot corner, which is the price of the wider supply. A board that sits at 15 V and holds the gates static pays almost nothing, and a board that leaves an input floating pays a great deal, because a floating CMOS input sits in the middle of the threshold band and turns the gate into an oscillator.

Where the triple AND shape fits

Three gates of three inputs are useful when a board has three separate enable conditions that must each be qualified by two other signals. A radio chain that enables a driver only when the supply is good, the temperature is inside a window and the controller says go is a three input AND, and three of those conditions in one package covers three stages. The alternative is a pair of two input gates per condition, which is three packages instead of one.

Area is 51.9 square millimetres for the SOIC against 181.42 for the plastic DIP, 79.56 for the SOP and 32 for the TSSOP. The thermal impedance in the family document runs 80 degrees per watt for the plastic DIP, 86 for the SOIC, 76 for the SOP and 113 for the TSSOP. On a static load none of them is close to a limit, and on a fault the wider body wins, which is why the DIP still appears on industrial boards that are expected to survive a miswire.

What the documents do not publish

The page gives no maximum propagation delay and no derating for a load heavier than 50 pF. It gives no output capacitance and no short circuit current, and it does not print the truth table. The data sheet carries all of those, and for this family the text version is readable rather than a scan, so the numbers can be lifted directly. What the page does carry is the orderable status, which is the part that changes most often and the part a buyer cannot get from a 1998 data sheet.

The tape drawing is the other practical detail. The 2500 piece SOIC reel is 330 mm in diameter and 16.4 mm wide, the pocket is 6.5 by 9.0 mm with a 2.1 mm depth, the pitch is 8 mm and pin one sits in the Q1 quadrant. A feeder that is already set for that tape needs no change, and a feeder that was bought for a 12 mm tape needs a new head before the reel can run. That is a line side cost rather than a part cost, and it is the sort of thing that only shows up on the first production day.

The supply current at 20 V is the last number to check on an industrial board. Five microamps in the cold corner and 150 microamps in the hot corner are small, and at 15 V they drop by a factor of five. A board that holds the gates static pays almost nothing, and one that leaves an input floating pays a great deal, because a floating CMOS input sits in the middle of the threshold band and turns the gate into an oscillator.

Second source and long term availability

The CD4073B is second sourced under the same number and the pin out is old and stable. The functional alternative is a 74HC11, which is faster, has a different input threshold and a different drive, so a board that depends on the 60 ns delay for a deliberate race has to be rechecked. The pin to pin cross reference page shows the checks we run, and the obsolete part cross reference hub covers the case where only the ceramic row closes.

What to send with an enquiry

Send the string, the body, the quantity and the date. If the board is through hole, the 25 piece tube is the packing. If the board is surface mount and the volume is under a reel, say so early, because the SOIC tube and the small reel are both closed and the only live options are a partial 2500 piece reel, the 2000 piece SOP reel or the TSSOP reel. The BOM scrubbing page explains how those pack sizes are reconciled against a build quantity before a schedule is confirmed.