Contact Us

HXNM40008

Brand: Hisiwell
Hisiwell HXNM40008 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXNM40008 — Discrete & Power Semiconductors | Superb Automation

HXNM40008

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXNM40008 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXNM40008: twenty watts at 4.4 to 5 GHz from a 20 dBm drive

The HXNM40008 is the most powerful member of the Hisiwell high gain family on the lower C band. The vendor index row reads 4.4 to 5 GHz, saturated output at least 43 dBm, gain at least 23 dB, drain efficiency at least 30 per cent, 28 V drain rail, continuous wave. That is 19.95 W across 600 MHz with a drive requirement of 20 dBm, which is 100 mW.

The efficiency row is the first thing to notice. Thirty per cent is fifteen points below the other members of this family on the same band, and it changes the thermal picture completely. At 30 per cent efficiency 19.95 W of output draws 66.5 W from the rail, which is 2.375 A at 28 V, and leaves 46.6 W of heat.

Forty six watts of heat is a different class of problem from the twelve watts of the 40 dBm member. It needs a carrier, a sink and an airflow path, not just a copper paddle. The part still offers 20 W with 23 dB of gain, and that combination is worth the thermal work in the applications where it fits.

Twenty three decibels of gain means the drive is 20 dBm, which is a packaged driver or a two stage discrete chain. It is not a modem output, so this part sits one stage further back than the smaller high gain members.

The parameter rows Hisiwell publishes for HXNM40008

Part classGallium nitride power transistor, internally matched, high gain family
Frequency range4.4 to 5 GHz
Bandwidth, calculated600 MHz, 12.77 per cent fractional at a 4.70 GHz centre
Saturation output power as publishedat least 43 dBm
Saturation output power in watts, calculated19.95 W
Gain as publishedat least 23 dB
Drain efficiency as publishedat least 30 per cent
Drain voltage28 V
Flatness across the bandnot published, the index prints a slash in that column
Operating modecontinuous wave
Output at 1 dB compressionnot published, the index prints a slash in that column
DC input at saturation, calculated66.5 W
Drain current at saturation, calculated2.375 A at 28 V
Dissipation at saturation, calculated46.6 W
Dissipation if efficiency rises to 40 per cent, calculated29.9 W
Drive power for the rated output, calculated20 dBm, 100 mW
Output per 100 MHz of the band, calculated3.33 W
Load voltage at saturation into 50 ohm, calculated31.6 V RMS, 44.7 V peak
Thermal resistance, junction to casenot published
Package outline and dimensionsnot published in text
Scattering parametersnot published
Stability data and load mismatch tolerancenot published
Pinch off voltage and gate bias pointnot published
Operating and storage temperaturenot published
Orderable addendum and packingnot published
Family neighbour at 40 dBm on the same bandHXNM40007, same rail, 26 dB gain

Thirty per cent efficiency and the heat that comes with it

46.6 W of dissipation on a carrier offering 3 C per watt rises 140 C over the case, which no assembly survives. On 1 C per watt the rise is 47 C and the case stays inside a 100 C limit at a 50 C ambient. The carrier is therefore the part of the build that decides whether this transistor can be used at all.

There is one way to read the efficiency row in the part's favour. It is a minimum at saturation, and the vendor may be quoting a conservative number because the part is matched over a wide window. If the real part runs at 40 per cent the dissipation falls to 29.9 W, which is a third less heat for the same output. That difference is worth measuring on the first article before the sink is ordered.

Backing off 6 dB for linear operation gives 5.01 W of average output and, at an assumed 25 per cent efficiency in backoff, 15.04 W of heat. The heat falls with the output, which is the useful side of running below saturation: a 20 W part in a 5 W application is a thermal proposition the same as a 5 W part.

The drain feed carries 2.375 A at 28 V. That is a copper bar or a wide trace with a via field, not a thin track, and the decoupling bank has to hold the rail through the modulation envelope. A rail that sags at the peak of the envelope loses gain exactly when the system needs it.

Where twenty watts and high gain together matter

The 4.4 to 5 GHz fixed link market uses 20 W for longer hops and for higher order modulation. A 20 W stage with 23 dB of gain takes a 100 mW driver, which is a part that can be bought as a packaged amplifier with its own internal matching, so the chain is two devices rather than four.

C band satellite uplinks use this power level for small terminals. For those the linearity at backoff is the limiting specification, and with no compression point published the operating point has to be established on a bench with the actual modulation.

Radar test sets and electronic countermeasure simulators use 20 W at C band to illuminate a receiver under test. For a simulator the continuous wave rating is a requirement rather than a convenience, and the 600 MHz window means the simulator can sweep the band without changing amplifiers.

Where the application is a defence program, the traceability and the documentation around the part matter as much as the electrical data. Our defense grade components route covers the chain of custody and the records a program normally asks for.

The output path at forty four volts peak

31.6 V RMS and 44.7 V peak into 50 ohm is above the 28 V rail and above the rating of many small connectors. The output network, the isolator and the test cables all have to be rated above 44.7 V at 4.7 GHz, and a mismatch can double that figure.

The vendor publishes no load mismatch tolerance. On a 20 W stage the conventional protection is an isolator with a load that can absorb the full reflected power, and the isolator has to be rated for 20 W forward and for the worst case reflection. A 10 W isolator in front of a 20 W part is a common and expensive mistake.

The output filter also has to handle the power. A cavity or a combline filter with a 20 W rating is a different component from the small ceramic filter used at 1 W, and its insertion loss at the band edges affects the delivered power more than the amplifier flatness does.

For the bench, the load has to be rated for 20 W continuously. A 20 W attenuator and a power meter with the right head are the minimum, and a directional coupler rated for the band is worth having, because the reflected power reading is the first sign of a failing match.

Choosing between the 4.4 to 5 GHz members

Three parts cover this window in the Hisiwell catalogue. The standard HXN40048 gives 40 dBm with 12 dB gain and 45 per cent efficiency. The high gain HXNM40007 gives 40 dBm with 26 dB gain and 45 per cent efficiency. This part gives 43 dBm with 23 dB gain and 30 per cent efficiency.

The efficiency difference between this part and the 40 dBm members is the number to weigh against the extra 3 dB of output. Nineteen point nine five watts against ten watts is 3 dB, and 46.6 W of heat against 12.2 W is 5.8 dB. The thermal system grows faster than the output does.

Where the system needs 20 W and has the airflow to remove 47 W, this part is the right choice and saves a combining step. Where the airflow is limited, two 10 W parts combined with a hybrid deliver the same 20 W with about 24 W of total heat and one more component.

For a replacement study the fields that decide the answer are the rail, the mode, the band, the output, the gain and the efficiency, in that order. Our RF power transistor cross reference page sets out the comparison and the bench work each field implies.

Questions buyers ask about HXNM40008

Is 30 per cent efficiency a misprint. It is what the vendor table prints, and it is consistent with a wide band match at 20 W. Three other members of the same family print 30 to 45 per cent depending on band and power, so the figure is plausible rather than anomalous.

Can it run continuous wave at full output. The mode column says continuous wave, so the rating is steady state. The thermal system then has to remove 46.6 W continuously, which is the hard requirement on the enclosure.

What is the compression point. Not published. A 20 W part used for a multicarrier signal normally runs 6 to 8 dB below saturation, which is 3 to 5 W of average output, and that operating point has to be confirmed by measurement.

How is it supplied. With no addendum, no packing column and no moisture level on the vendor page, the order names the band, the rail and the quantity and the factory confirms the rest. The part is held with the C band family through the RF procurement route.