Contact Us

HXC50019

Brand: Hisiwell
Hisiwell HXC50019 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXC50019 — Discrete & Power Semiconductors | Superb Automation

HXC50019

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXC50019 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXC50019: 700 W matched at 915 MHz on a 40 V rail, narrowband by intent

The HXC50019 is a 700 W internally matched LDMOS device on a 40 V rail, filed for multiple ISM and RF energy applications at frequencies up to 1 GHz, in Class AB, B or C, for both CW and pulse in narrowband operation. The index row places it at 915 MHz with 15 dB of gain and 68 per cent efficiency. The product page adds the word that matters most, narrowband, which is a statement about how the internal match is built and therefore about how the part can be used.

Narrowband at this power is not a limitation, it is the reason the numbers are good. A match built for a single channel can hold a better return loss and a lower loss than a broadband network, and 68 per cent efficiency at 700 W on 40 V is only reachable that way. The trade is that the part covers 915 MHz plus a margin and not 700 to 1000 MHz, so a product that needs a band has to be checked against the vendor's band rather than the index.

The 40 V rail is the other unusual feature. Most of the shelf sits on 28 V or 50 V, and 40 V is the rail that balances current against voltage for a 700 W part. At 68 per cent efficiency the current is 25.7 A, which is half what the same power would draw on 28 V and still well below the 50 V shelf. For a product with an existing 40 V bus, that is the cheapest arrangement.

The HXC50019 rows as the vendor publishes them

Part classLDMOS RF power transistor, internally matched, narrowband ISM
Output, index row and page700 W
Output in dBm, calculated58.45 dBm
Frequency, index row915 MHz
Frequency range, pageUp to 1 GHz, narrowband operation stated
Drain rail, index row40 V
Modes, pageClass AB, B or C, CW and pulse
Gain, index row15 dB
Drain efficiency, index row68 per cent
Drive at 15 dB, calculated22.14 W, or 43.45 dBm
Load voltage at 700 W into 50 ohm, calculated187.1 V rms, 264.6 V peak
Peak against the 40 V rail, calculated6.61 times
Load voltage at a 2 to 1 mismatch, calculated529 V peak
Load voltage at a 3 to 1 mismatch, calculated794 V peak
DC input at 68 per cent, calculated1029 W, 25.74 A at 40 V
Heat to remove at 68 per cent, calculated329 W
DC input at 60 per cent, calculated1167 W, 29.17 A at 40 V
Heat to remove at 60 per cent, calculated467 W
Thermal resistance, junction to caseNot published for this row
Breakdown voltage and capacitance setNot published for this row
Test fixture and board materialNot published for this row
Document link on the pagePoints at the site root and serves nothing
Applications listed on the pageISM RF energy, 915 MHz heating and plasma
Orderable addendumNone published
Packing quantity and moisture levelNot published

What 700 W on 40 V asks of the supply and the applicator

700 W into 50 ohm is 187.1 V rms and 264.6 V peak. On a 40 V rail that is 6.61 times the supply, which is only possible because the part is matched and push pull, with the internal combiner summing two load lines. The current is 25.7 A at 68 per cent efficiency, rising to 29.2 A at 60 per cent, and at that level the bus bar and the bulk capacitance at the device are part of the amplifier rather than accessories to it.

The load side sees 264.6 V at full power, 529 V at a 2 to 1 mismatch and 794 V at 3 to 1. In an ISM applicator the load is the material being heated and its impedance changes with temperature, so a 2 to 1 excursion is normal rather than exceptional. Everything downstream of the device, the capacitors, the connector, the applicator feed and the circulator, has to be rated for 529 V as a working condition.

Narrowband operation also means the applicator has to be tuned to the amplifier rather than the other way round. At 915 MHz with a narrow internal match, a cavity that moves 10 MHz off tune will show a return loss the part was never measured into, and the protection that saves the device is a circulator with a load rather than a reflected power trip that fires on every pulse.

Thermal: 329 W of heat and a missing number

At 68 per cent efficiency the heat is 329 W and at 60 per cent it is 467 W. There is no thermal resistance published for this row, so bound it from the shelf: a 1 kW part on 50 V publishes 0.2 degrees per watt and a 300 W matched part is normally near 0.3. A 700 W matched part on 40 V normally sits near 0.2 to 0.25. At 0.22 degrees per watt and 329 W of heat the rise is 72 degrees, so at an 85 degree case the junction is near 157 degrees against a 225 degree limit. At 467 W of heat the rise is 103 degrees and the junction near 188 degrees.

Both bounds are inside the limit, which is what a 700 W part has to achieve to be sellable, but the margin at the lower efficiency is thin. A product that runs at 60 per cent rather than 68 per cent, which is what a modulated or backed off signal will do, is 35 degrees closer to the limit and needs the case held below 80 degrees.

At this heat load the interface material is a component, not a consumable. A 25 micron phase change material against a 100 micron pad is worth 15 to 20 degrees at 330 W, and the flange flatness spec is what makes that difference real. Ask the vendor for the flatness tolerance with the thermal resistance, because the two only work together.

Drive, gain and 15 dB at 700 W

15 dB of gain means the drive for 700 W is 22.1 W, or 43.45 dBm. That is a driver stage of its own and it is the reason a 700 W ISM amplifier is built as three stages. On the same shelf the 300 W part gives 15 dB and the 850 W part 16 dB, so gain is flat across the group and one driver family serves all three.

The matched input is what makes 15 dB practical. An unmatched 700 W part would present an input impedance low enough that the driver would have to deliver current rather than voltage, and the gain would vary across the band. With an internal match the driver sees a defined load and the gain is stable, at the cost of the band being narrow.

The narrowband statement should be read as a requirement on the product, not just a note. A 915 MHz ISM amplifier is normally specified at 902 to 928 MHz, which is a 26 MHz window and fits a narrowband match comfortably. A product that needs 860 to 960 MHz does not fit, and the next row up in band, the 700 to 1000 MHz 300 W part, is a different device with a different trade.

Where the HXC50019 sits on the shelf

The 915 MHz group on 40 V has this 700 W part and the 850 W part above it, and the 300 W part on 28 V below. In decibels 300 W to 700 W is 3.68 dB and 700 W to 850 W is 0.84 dB, so the top of the group is crowded and the bottom step is wide. A requirement for 500 W has no exact rung and is normally met by running the 700 W part below rating, which also buys linearity.

Read as a choice, this row is the one for a 915 MHz ISM product at 700 W where a 40 V bus exists, where the load is tuned and narrowband, and where a circulator protects the device from the applicator. A buyer who needs the last 0.84 dB takes the 850 W row and accepts a part whose page and index disagree on wattage; a buyer who needs to stay on 28 V takes the 300 W part and accepts 3.68 dB less output.

Before the purchase order goes out

Two procurement points. No document is reachable for this row, so the thermal resistance, the breakdown voltage and the flatness tolerance should be requested in writing before the heat sink and the flange are specified, and the incoming route for a part arriving with no published document is on the incoming inspection plan page. Buyers comparing 700 W ISM parts at 915 MHz should work from the RF power transistor cross reference, where rail, match type and thermal resistance can be lined up before the headline wattage, and a full ISM bill of materials including the circulator and the applicator feed can be placed through the one stop RF supply route.