Contact Us

HXN50141

Brand: Hisiwell
Hisiwell HXN50141 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN50141 — Discrete & Power Semiconductors | Superb Automation

HXN50141

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN50141 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN50141: 280 W continuous on the 3 GHz window, single ended on 50 V

The HXN50141 is the highest single ended power row on the DC to 3 GHz window of the Hisiwell 50 V shelf. The index gives it 280 W, continuous wave, and the description adds two things: single ended, and thermally optimised to support continuous wave operation. On a window where the neighbours are 100, 140 and 150 per side, this is the part that removes a combining stage from the chain.

280 W is 54.47 dBm. It is 4.47 dB above the 100 W HXN50121 on the same window, 3.01 dB above the 140 W HXN50124, and 0.30 dB below the combined output of the push-pull HXN50131. That last comparison is the one that matters commercially: the same power can be had from a pair, and the difference between the two parts is topology, not output.

The description's thermal sentence is the second thing to read. Thermally optimised to support continuous wave says the die attach and the flange were chosen for steady state operation, which on a 280 W part at 3 GHz is the difference between a product and a prototype. No thermal resistance is published with it, so the sentence is a claim to be confirmed and not a figure to calculate with.

The HXN50141 rows as the vendor publishes them

Part classGallium nitride HEMT power transistor, single ended
Frequency rangeDC to 3 GHz
Band width, calculated3,000 MHz
Saturation output, index row280 W
Saturation in dBm, calculated54.47 dBm
Output per gigahertz of band, calculated93.3 W per GHz
Drain rail, index row50 V
Mode, index rowContinuous wave
Thermal claim in the descriptionOptimised thermally to support continuous wave operation
MatchingNo prematch stated
GainNot published on the index row
Drain efficiencyNot published on the index row
Package and bodyNot published on the index row
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Load impedance, source and loadNot published
Applied application listWireless communication infrastructure, wideband amplifier, EMC testing, industrial scientific and medical
Orderable addendum and packing dataNone published

Eighteen rows and only one electrical figure among them. On a 280 W continuous part that is the thinnest record on the shelf, and it is worth being blunt about what it means: the band, the rail and the power are known, and everything a power amplifier engineer needs in order to build the board is not. A quotation built on this row can state the watts and the rail and cannot state much else.

The band is the compensating feature. Three gigahertz from DC on a 280 W device is a wide product, and a customer who needs one amplifier for cellular, industrial and instrumentation bands consolidates three part numbers into one. That is a supply chain benefit rather than a technical one, and it is real: one part number, one set of spares, one qualification.

The heat at 280 W, and why the claim needs a number

Drain efficiency assumedDC input, calculatedDrain current at 50 V, calculatedHeat at 280 W output, calculated
50 per cent560 W11.20 A280 W
55 per cent509 W10.18 A229 W
60 per cent467 W9.33 A187 W
65 per cent431 W8.62 A151 W
70 per cent400 W8.00 A120 W

Between 120 and 280 W of dissipation is the whole mechanical question, and the efficiency column that would answer it is blank. The vendor's thermal sentence says the part was optimised for continuous wave, which is a statement of intent, and the number behind it is the thermal resistance, which is not published. A customer building a continuous wave amplifier at 280 W has to ask for that number before the cold plate is ordered.

The current spread of 8.00 to 11.20 A is the supply question. On a continuous part the supply has to hold the worst corner through a full thermal cycle, and a supply sized to the 8 A figure will fold back on a hot day. Sizing on the low efficiency end is the conservative choice and the only defensible one without the sheet.

At the output, 280 W into 50 ohm is 118.3 V RMS and 167.3 V peak by calculation, 236.6 V peak under a two to one mismatch. On a continuous wave part the coupler and the load protection are part of the product, not test bench accessories, because a continuous carrier into a mismatched load will destroy the device faster than any pulsed application.

Single ended at 280 W against the alternatives

HXN50121100 W single ended, DC to 3 GHz50.00 dBm4.47 dB below
HXN50124140 W single ended, DC to 3 GHz51.46 dBm3.01 dB below
HXN50131150 W per side push-pull, combined 300 W54.77 dBm0.30 dB above, needs two bias points
HXN50141280 W single ended, DC to 3 GHz54.47 dBmReference
HX04200F219 W maximum saturated, DC to 4 GHz53.40 dBm1.07 dB below, documented and flanged
HX30370P370 W on 2 to 3 GHz, 48 V55.68 dBm1.21 dB above, narrower band

The HX04200F is the documented alternative and it gives up 1.07 dB. It publishes a maximum saturated power, a best drain efficiency, a linear gain, a flanged body and a rail, and it covers one more gigahertz. For a programme with a review gate, a part with five published numbers beats a part with one, even at a decibel of cost.

The HX30370P is the power alternative and it gives up the bottom of the band. Three hundred and seventy watts on 2 to 3 GHz is 1.21 dB more, but the window starts at 2 GHz, so a customer who needs 900 MHz cannot use it however much power it offers.

The shelf view is on the RF power transistor cross reference, and the document request that closes the thermal gap is described on the RF component sourcing page.

Ordering and the documents to pair with it

No orderable addendum, packing column, marking code or moisture level is published, and this page quotes none. The order should carry the part number, the band, the rail, the continuous wave condition, the output at the flange, the drive level and the quantity. Because the part is single ended and unmatched, the load impedance at the frequency of use belongs on the same order as a requested document.

Three documents should be requested together: the data sheet, the thermal resistance at the mounting interface, and a measured sweep at the frequency of use. None of the three is on the public page, and on a 280 W continuous part the thermal resistance is the one that decides the mechanical drawing, so it is the first of the three to chase.

Lead time is not published. The variables are the package, the die attach and the test, and on a continuous wave part the test is the long pole because it runs hot. A schedule quoted without those answers is a placeholder.

For a second source at this band, the one stop RF supply page sets out the re measurement that a substitution requires.

Questions buyers ask about the HXN50141

Is 280 W continuous or saturated? The index row is a saturation figure and the mode is continuous wave. On a continuous carrier the output is the saturation point and the heat is continuous, which is why the thermal number matters more here than on a pulsed part.

What is the thermal resistance? Not published. The description claims a thermal optimisation for continuous operation and gives no figure. It has to be requested.

Is it prematched? No prematch is stated. Both ports are board work and no impedance table is published.

Why not use the push-pull part instead? It is 0.30 dB more and needs two matched bias points and an output transformer. The single ended part is the simpler build and the pair is the cleaner harmonic build.

Where the alternatives have to be aligned on one line, the reference page is the cross reference.