Contact Us

HXN50122

Brand: Hisiwell
Hisiwell HXN50122 is a discrete semiconductors component designed for DC-DC Converters & Power Supplies and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HXN50122 — Discrete & Power Semiconductors | Superb Automation

HXN50122

Hisiwell — Discrete & Power Semiconductors

Product Overview

The HXN50122 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • Low Rds(on) for minimal conduction losses in power switching
  • Fast switching speed with low gate charge for high-frequency operation
  • Avalanche-rated for robust operation under inductive load conditions
  • High junction temperature rating for demanding environments
  • Logic-level gate drive compatible for simplified design
  • RoHS and AEC-Q101 qualified options available

Key Specifications

Vds / VceV
Id / IcA
Rds(on) / Vce(sat)mΩ
QgnC
Technology—
Package—
Configuration—
Mounting—

Applications

Switch-Mode Power Supplies Motor Drives & Inverters Battery Management Systems DC-DC Converters Load Switching Automotive Power Distribution

Request Quote — In Stock, 100% New & Original, Full Warranty

HXN50122: 130 W unmatched at DC to 2 GHz on 50 V

The HXN50122 is the entry point of the DC to 2 GHz group on the Hisiwell 50 V shelf: 130 W of saturation, single ended, continuous wave, and the vendor calls this one unmatched rather than internally prematched. That single word changes what the customer has to build, and it changes what the part is good for.

130 W is 51.14 dBm by calculation. It sits 2.66 dB below the 240 W HXN50126 on the same window and 1.14 dB above the 100 W HXN50121 on the 3 GHz window. On a shelf where every row above it is prematched, the entry row is the one where the board does the matching work, and that is usually the right trade for a customer who already owns a match network in that band.

The vendor description is explicit about what it is: a 130 watt unmatched GaN HEMT for multiple applications up to 2000 MHz, with performance guaranteed for operation inside that range and no guarantee outside it. Guaranteed inside the range is a stronger statement than most rows on this shelf carry, and it is worth noting that the guarantee is about the band and not about a figure at a frequency.

The HXN50122 rows as the vendor publishes them

Part classGallium nitride HEMT power transistor, single ended, unmatched
Frequency rangeDC to 2 GHz, 2000 MHz stated in the description
Saturation output, index row130 W
Saturation in dBm, calculated51.14 dBm
Output per gigahertz of band, calculated65 W per GHz
Drain rail, index row50 V
Mode, index rowContinuous wave
MatchingUnmatched, network on the customer board
Performance guarantee, vendor wordingGuaranteed inside the stated band, none outside it
GainNot published on the index row
Drain efficiencyNot published on the index row
Peak and average outputNot published
Package and bodyNot published on the index row
Thermal resistance, junction to caseNot published
Gate bias point and quiescent currentNot published
Load impedance, source and loadNot published, and this is the row that matters most on an unmatched part
Applied application listWireless communication infrastructure, wideband amplifier, EMC testing, industrial scientific and medical
Orderable addendum and packing dataNone published

On an unmatched part the load impedance row is the one that decides the schedule. A prematched device lets a customer start from a 50 ohm port and work outward. An unmatched device starts from a die and a bond pad, so the first board needs a load pull set or a measured source and load table at the frequency of use. This page prints that row as not published and does not fill it with an estimate, because a guessed load line on a 130 W part is how a first article gets destroyed.

The guarantee wording is the second thing to read. The vendor guarantees performance for applications operating in the stated range and guarantees nothing outside it. That is a normal statement for a broadband die, and it has one practical consequence: a customer who operates at 2.2 GHz with an HXN50122 has no vendor guarantee at all, whatever the part does on the bench.

The rail, the current and the heat at 130 W

Drain efficiency assumedDC input, calculatedDrain current at 50 V, calculatedHeat at 130 W output, calculated
50 per cent260 W5.20 A130 W
55 per cent236 W4.73 A106 W
60 per cent217 W4.33 A87 W
65 per cent200 W4.00 A70 W
70 per cent186 W3.71 A56 W

With efficiency blank on the row, this is an envelope. The current span from 3.71 to 5.20 A across the efficiency range is small enough that a 10 A supply covers it with margin, and that is the practical difference between this row and the 280 W row above: the supply and the choke are ordinary parts here, not busbar hardware.

The heat span is the larger problem. Between 56 and 130 W of dissipation the same part goes from a modest spreader to a serious one. On a continuous wave amplifier the sink follows the continuous figure, and a 130 W part that leaves 130 W of heat needs a thermal path that holds the junction inside its limit at the ambient of the enclosure, which is the number that has to be read from the sheet and not assumed from the watts.

At the output, 130 W into 50 ohm is 80.6 V RMS and 114.0 V peak by calculation, 161.2 V peak under a two to one mismatch. That is below the 200 V capacitor family and inside the 100 V family with margin only when the mismatch is controlled. The lower voltage is the practical benefit of the smaller bin: the output network can use smaller parts and the coupler can be a stock item.

Unmatched against the prematched rows beside it

HXN50122130 WUnmatchedCustomer network at both portsLowest power, lowest voltage, most board work
HXN50126240 WInternally prematchedInput match inside, output on the board2.66 dB more, one match instead of two
HXN50127280 WInternally prematchedInput match inside, output on the board3.33 dB more than this part
HX25400F400 W index, 240 W parameter listWideband, thermal package28 or 48 V railPublished gain and efficiency, dual rail
HX25600F600 W index, 320 W parameter listWideband, thermal package28 or 48 V railPublished tables and a full data sheet
HXN50121100 WUnmatched3 GHz window30 W less, 1 GHz more band

The choice between the unmatched 130 W row and the prematched 240 W row is not a power choice. A customer with an existing 50 ohm amplifier chain and a match network already tuned in the band takes the unmatched part and keeps the network. A customer starting from a blank board takes the prematched part, because the internal match removes one of the two hardest tasks on the board and 2.66 dB is rarely worth a second tuning cycle.

The 1 GHz more band on the HXN50121 is the other axis. At 100 W on a DC to 3 GHz window, the extra band is bought with 1.14 dB of power. For a customer whose product covers both the cellular and the 2.4 GHz industrial band, the wider part is the only one of the two that covers the whole range, and the vendor's guarantee wording makes the difference between a covered and an uncovered band a contractual matter rather than a bench observation.

Both rows are on the RF power transistor cross reference, and the route for obtaining a measured load pull set before a first article is on the RF component sourcing page.

What to put on the order, and what to leave off

No orderable addendum, no packing column, no marking code and no moisture level are published for this part. This page offers no order code and quotes none of those fields. The order should carry the part number, the band, the 50 V rail, the continuous wave condition, the output at the flange, the drive level expected and the quantity, and nothing else should be invented.

For an unmatched part the load pull request belongs on the same purchase order as the parts, not a month later. The vendor publishes no source or load table for the HXN50122, so a first board built without one is a board built on a calculated guess, and on a 130 W die that guess is expensive. The request is cheap and it is the single highest value item on the whole transaction.

Lead time is not published. The two variables are the package and the test, and both are off the index row. An honest answer before a factory reply is that the schedule is open, and any date quoted without those two answers is a guess dressed as a commitment.

When a substitute is needed, the qualification path is on the one stop RF supply page, which covers what has to be re measured on the board before a second source is released into a product.

Questions buyers ask about the HXN50122

Does unmatched mean it cannot be used at 50 ohm? It means no internal match is provided. The board network transforms the die to 50 ohm at the band of use. On a 130 W part that network is a normal microstrip or a small PCB balun, not exotic hardware.

Why is this one guaranteed and the prematched rows not? The guarantee wording differs by page, not by intended use. The vendor states the band guarantee in this description and omits it on the neighbours. It is a documentation difference and it should be read as one.

Can the rail be dropped to 28 V? The row states 50 V. No dual rating appears on this part, unlike the HX members of the shelf which carry 28 or 48 V. A rail change is a factory question here.

Is 130 W available across the whole band? The row gives one number for a 2 GHz window and publishes no sweep. The only defensible reading is that the number is a best case inside the window and the sweep at the frequency of use decides the rest.

For a first pass on which shelf to use, the sourcing page lays out the route from a band and a rail to a short list, and the comparison itself belongs on the cross reference page.