HXC50142
Product Specifications
HXC50142
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50142 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50142: 20 W on 12.5 V, the small row that drives the large ones
The HXC50142 is a Hisiwell LDMOS RF power transistor at 20 W, single ended, unmatched, with a band edge at 1 GHz and a 12.5 V rail. The vendor page calls it a 20 watt, highly rugged, unmatched LDMOS FET for wideband commercial and industrial work from HF to 1 GHz, and adds one sentence the larger rows do not have: it can be used in class AB or class B and in class C for all typical modulation formats.
That sentence is the useful part. A 20 W part that works in class C is a driver for a larger stage or a final stage for a constant envelope system, and the 12.5 V rail means it belongs in a vehicle, a handheld rack or a battery product rather than in a mains powered transmitter. The index row gives 15 dB of gain and 65 per cent efficiency, so the drive is 0.63 W, which is a single MMIC.
The page publishes no parameter block, no thermal resistance, no load pull, no package drawing, no pulse width and no orderable addendum. What follows keeps the published figures, adds arithmetic a buyer can repeat, and marks the assumed ones.
The HXC50142 rows as the vendor publishes them
| Part class | LDMOS RF power transistor, unmatched, single ended |
| Frequency range, index row | HF to 1 GHz |
| Frequency range, vendor page | HF to 1 GHz |
| Output, index row and page | 20 W |
| Output in dBm, calculated | 43.01 dBm |
| Gain, index row | 15 dB |
| Efficiency, index row | 65 per cent |
| Drive for 20 W at 15 dB, calculated | 0.63 W, 28.01 dBm |
| Load voltage at 20 W into 50 ohm, calculated | 31.6 V rms, 44.7 V peak |
| Peak against the 12.5 V rail, calculated | 3.58 times |
| Peak at a 2 to 1 mismatch, calculated | 89.4 V |
| Peak at a 3 to 1 mismatch, calculated | 77.5 V |
| DC input at 65 per cent, calculated | 30.8 W |
| Drain current at 12.5 V and 65 per cent, calculated | 2.46 A |
| Heat to remove at 65 per cent, calculated | 10.8 W |
| DC input at 55 per cent, calculated | 36.4 W |
| Drain current at 12.5 V and 55 per cent, calculated | 2.91 A |
| Heat to remove at 55 per cent, calculated | 16.4 W |
| Amplifier classes named on the page | Class AB, class B and class C |
| Modulation formats named on the page | All typical formats |
| Mode, index row | CW |
| Drain rail, both sources | 12.5 V |
| Thermal resistance, junction to case | Not published |
| Load impedance and load pull | Not published |
| Package and drawing | Not published |
| Pulse width and duty cycle | Not published |
| Orderable addendum and packing | None published |
| Applications listed on the page | HF short wave, ground communication, TV VHF I, FM, avionics, commercial ground, TV VHF III, jammer, TV UHF, ISM and instrumentation |
What 20 W on 12.5 V asks of the rest of the board
20 W into 50 ohm is 31.6 V rms and 44.7 V peak, which is 3.58 times a 12.5 V rail. That is a low multiple, and it means the part is a good fit for a battery product: the output never swings far above the rail, the network ratio is modest, and a two or three element match on a 0.5 mm laminate will do the job.
At 65 per cent the part draws 30.8 W and 2.46 A, and leaves 10.8 W to remove. At 55 per cent it draws 36.4 W and 2.91 A and leaves 16.4 W. Ten to sixteen watts of heat is a small heat sink or a copper pour with a few vias, and that is the practical difference between this row and the 230 W pair on the same shelf, where the cold plate is a mechanical assembly rather than a copper area on the board.
The drive is 0.63 W at 15 dB, which is inside what a single gain block delivers. A higher gain driver is not needed, and the saving matters in a product where the driver is on the same board and shares the same 12.5 V rail, because the driver current is a significant fraction of the total at this power level.
Class C operation is named on the page and it is worth taking at face value only after a measurement. A class C stage at 1 GHz needs a device that can be biased below threshold and still deliver gain, and the efficiency is higher than in class AB while the gain is lower. If the page's 15 dB is a class AB figure, a class C build will need more drive than 0.63 W, and the first article should measure it rather than assume it.
The rows around the HXC50142 at 12.5 and 28 V
| HXC50178, 50 W per device pair, 12.5 V | 100 W, 50.00 dBm, 17 dB, 77 per cent, 6.99 dB above |
| HXC50142, 20 W single, 12.5 V | 20 W, 43.01 dBm, 15 dB, 65 per cent, the row this page covers |
| HXC50143, 30 W single, 12.5 V | 30 W, 44.77 dBm, 17 dB, 65 per cent, 1.76 dB above |
| HXC50169, 70 W per device pair, 28 V | 140 W, 51.46 dBm, 18 dB, 60 per cent, 8.45 dB above |
| HXC50175, 115 W per device pair, 28 V | 230 W, 53.62 dBm, 15 dB, 65 per cent, 10.61 dB above |
| HXC50153, 10 W single, 28 V | 10 W, 40.00 dBm, 23 dB, 63 per cent, 3.01 dB below |
| HXC50156, 40 W single, 28 V | 40 W, 46.02 dBm, 20 dB, 60 per cent, 3.01 dB above |
| HXC50095, 30 W single, 50 V | 30 W, 44.77 dBm, 1.5 GHz edge, 1.76 dB above |
The nearest neighbour on the same rail is the 30 W row, 1.76 dB above, and the 100 W pair at 12.5 V is 6.99 dB above with 77 per cent efficiency published. That pair is the interesting one for a battery product at higher power, because 77 per cent at 100 W on 12.5 V means only 30 W of heat, which is still a copper area rather than a cold plate.
The 10 W row at 28 V is 3.01 dB below and carries 23 dB of gain, which makes it a better driver than this part where the rail is 28 V and the requirement is a driver rather than a final stage. Choosing between them is a rail decision first and a power decision second.
Where this part earns its place in a system
A 20 W part on 12.5 V is either the final stage of a small product or the driver of a larger one, and the two uses ask different things of it. As a final stage, the 65 per cent efficiency and the 10.8 W of heat are the headline, and the 43.01 dBm of output is the number the system is specified on. As a driver, the 15 dB of gain and the 0.63 W of drive are the headline, and the linearity under a modulated signal is what matters rather than the saturated output.
The page names all typical modulation formats, which is a broad claim. For a constant envelope format such as FM it is easy to accept. For a multi carrier or a wideband signal it needs a measurement, because the peak to average ratio moves the operating point away from the saturated one, and the efficiency falls while the heat rises. At 20 W the absolute numbers are small, but the junction temperature is what decides the lifetime of a part in a sealed enclosure.
A third use is as a predriver in front of the 140 W or 230 W pairs on the same shelf. In that role the part is running well below its rating and the question is gain flatness across the band rather than output. No typical table is published for this row, so flatness has to be measured on the first article, and the answer decides how much equalisation the system needs.
Incoming inspection and a small part test bench
A 20 W part can be tested on a bench that would not survive a 230 W pair, which is an advantage. A 50 W attenuator, a 100 W load and a 5 A supply are enough, and the fixture can be a laminate board with an SMA connector at each end. That means the incoming test can be run on every lot rather than on the first article alone, and a lot to lot change in gain or efficiency shows up before it reaches production.
The incoming inspection plan page sets out the sequence. For this row the plan can add a gain measurement at three frequencies across the sub band and an efficiency measurement at rated output, because both can be done in a few minutes with the instruments a small bench already has.
Where the part goes into a sealed enclosure, add a case temperature measurement at thermal equilibrium under the actual modulation, not under CW. A 10.8 W heat load in a sealed box with no airflow will raise the internal ambient well above the outside temperature, and the junction temperature follows the internal ambient rather than the room.
Questions buyers ask about the HXC50142
What supply does it need? 12.5 V on the row and on the page. That is a battery rail rather than a mains rail, which is why the row exists next to the 28 V and 50 V parts.
How much drive does it need? 0.63 W, 28.01 dBm, at the published 15 dB. In class C the gain will be lower and the drive higher, and that has to be measured.
Can it run class C? The page says class AB, class B and class C for all typical modulation formats. No bias point or drive condition is published for class C, so the first article has to establish the operating point.
How much heat is there? 10.8 W at 65 per cent and 16.4 W at an assumed 55 per cent. In a sealed enclosure that is a copper area rather than a heat sink, but the internal ambient still has to be accounted for.
Is there a data sheet or a thermal resistance? Neither is published. No document is linked and no junction to case figure is given, so the junction temperature can only be obtained from the factory or from a measurement.
What is the alternative if 20 W is not enough? The 30 W single on the same 12.5 V rail is 1.76 dB above, and the 100 W pair on 12.5 V is 6.99 dB above with 77 per cent efficiency published.
For price and lead time on the HXC50142 with the 30 W and the 100 W pair as alternates, send the quantity, the modulation and the enclosure condition to the RF component sourcing desk. Where the part is a driver in front of a larger stage, the RF supply page sets out how a matched driver and final are bought together rather than as two separate lines on a purchase order.