HXC50175
Product Specifications
HXC50175
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC50175 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC50175: 230 W push pull on 28 V, and the 5.4 times rail it still needs
The HXC50175 is a Hisiwell LDMOS RF power transistor at 115 W per device, two devices in a push pull pair, a 28 V rail and a band edge at 1 GHz. The vendor page calls it a 230 watt capable, high performance, unmatched push pull LDMOS FET for wide band commercial and industrial work from HF to 1000 MHz, usable in CW, pulse or any other modulation, and it names low thermal resistance as a feature. The index row adds the two numbers the page leaves out: 15 dB of gain and 65 per cent efficiency.
This is the row for a 28 V system that wants 230 W with published gain and efficiency, which makes it easier to plan than the 50 V rows without either figure. The catch is the rail. At 28 V a 230 W pair needs a peak of 151.7 V at the load, which is 5.42 times the rail, and that ratio is close to the 6.00 times of a 900 W pair on 50 V. The lower rail does not make the output network easier; it makes the current higher and the matching ratio larger.
The page and the row agree on the power, the rail and the band edge. Neither publishes a pulse width, a duty cycle, a thermal resistance figure, a load pull table, a package drawing or an orderable addendum. What follows keeps the published figures, adds arithmetic a buyer can repeat, and marks the assumed ones.
The HXC50175 rows as the vendor publishes them
| Part class | LDMOS RF power transistor, unmatched, push pull pair |
| Frequency range, index row | HF to 1 GHz |
| Frequency range, vendor page | HF to 1000 MHz |
| Output per device, index row | 115 W |
| Output for the pair, calculated | 230 W |
| Output in dBm, per device, calculated | 50.61 dBm |
| Output in dBm, pair, calculated | 53.62 dBm |
| Step from one device to the pair, calculated | 3.01 dB |
| Gain, index row | 15 dB |
| Efficiency, index row | 65 per cent |
| Drive for 230 W at 15 dB, calculated | 7.27 W, 38.62 dBm |
| Load voltage at 230 W into 50 ohm, calculated | 107.2 V rms, 151.7 V peak |
| Peak against the 28 V rail, calculated | 5.42 times |
| Peak at a 2 to 1 mismatch, calculated | 303.3 V |
| Peak at a 3 to 1 mismatch, calculated | 262.7 V |
| DC input at 65 per cent, calculated | 353.8 W |
| Drain current at 28 V and 65 per cent, calculated | 12.64 A |
| Heat to remove at 65 per cent, calculated | 123.8 W, 61.9 W per device |
| DC input at 55 per cent, calculated | 418.2 W |
| Drain current at 28 V and 55 per cent, calculated | 14.94 A |
| Heat to remove at 55 per cent, calculated | 188.2 W |
| Mode, index row | CW |
| Modes named on the page | CW, pulse and any other modulation |
| Drain rail, both sources | 28 V |
| Thermal resistance, junction to case | Not published, described only as low |
| Load impedance and load pull | Not published |
| Package and drawing | Not published |
| Pulse width and duty cycle | Not published |
| Orderable addendum and packing | None published |
| Applications listed on the page | Industrial, scientific and medical, FM radio, VHF TV, mobile radio |
What 230 W at 28 V asks of the supply and the network
230 W into 50 ohm is 107.2 V rms and 151.7 V peak. Against a 28 V rail that is 5.42 times, which is nearly as demanding as the 6.00 times of a 900 W pair on 50 V. The reason is simple: the power is a quarter of the 900 W pair and the rail is a little over half, so the product of the two ratios lands in a similar place. A 28 V part is not a low voltage convenience at this power; it is a different set of trade offs.
At 65 per cent the pair draws 353.8 W and 12.64 A, and leaves 123.8 W to remove, 61.9 W per device. At 55 per cent it draws 418.2 W and 14.94 A, and leaves 188.2 W. The 65 per cent figure is the published one, which is unusual on this shelf and worth using: it means the supply can be a 500 W unit rather than a 700 W one, and the cold plate can be modest.
The drive is 7.27 W for 230 W at 15 dB, which is above what a single small signal stage usually delivers. Plan a two stage driver with 10 W of output and a few decibels of margin rather than a 1 W exciter, and check the driver's own harmonic content, because a push pull stage driven by a single ended driver carries the driver's second harmonic into the output network where the balun may not reject it.
The band edge at 1 GHz is where a 28 V push pull pair has to be treated carefully. A balun that works at 400 MHz is a different component at 1 GHz, and the coaxial or transmission line balun that holds 230 W across the band is larger than the laminate usually allows. Ask for the fixture drawing, and if there is none, measure the balun loss before blaming the transistors.
Push pull against the single ended rows at this power
| HXC50175, 115 W per device, 28 V, pair | 230 W, 53.62 dBm, 15 dB, 65 per cent, 1 GHz edge |
| HXC50169, 70 W per device, 28 V, pair | 140 W, 51.46 dBm, 18 dB, 60 per cent, 1 GHz edge |
| HXC50143, 100 W single, 28 V | 100 W, 50.00 dBm, 18 dB, 65 per cent, 1.5 GHz edge |
| HXC50142, 20 W single, 12.5 V | 20 W, 43.01 dBm, 15 dB, 65 per cent, 1 GHz edge |
| HXC50101, 200 W single, 50 V | 200 W, 53.01 dBm, 17 dB, 60 per cent, 800 MHz edge |
| HXC50069, 270 W single, 28 V | 270 W, 54.31 dBm, 15 dB, 65 per cent, 0.7 to 1 GHz |
| HXC50062, 30 W single, 28 V | 30 W, 44.77 dBm, 20 dB, 60 per cent, pulse, 0.7 to 2.7 GHz |
| HXC50132, 150 W single, 50 V | 150 W, 51.76 dBm, 15 dB, 55 per cent, 0.9 to 1.5 GHz |
The 270 W single ended row at 0.7 to 1 GHz is the nearest competitor and it is 0.69 dB above the pair for one device rather than two. Where the application needs only 200 W in that band, the single device is simpler, and the pair is the better choice only where the push pull symmetry is wanted for even harmonic cancellation or where two devices on a shared flange suit the mechanical arrangement of the amplifier.
The step down to the 140 W pair is 2.16 dB. That is a small step for a device bin change, and it is the row to look at when the 230 W figure is a target rather than a requirement, because a 140 W pair at 18 dB needs only 2.22 W of drive instead of 7.27 W, which removes a driver stage from the build.
Even harmonics and why push pull is chosen
A push pull pair driven in antiphase cancels the even order terms at the output, so the second harmonic that a single ended stage would send to the load is largely rejected before the filter sees it. That is the reason to choose this topology in an FM broadcast or a TV transmitter, where the second harmonic sits inside a service that is licensed separately and the filter has to do less work.
The cancellation is only as good as the balance. A one decibel amplitude error or a five degree phase error leaves a residual second harmonic, and at 230 W the residual is what determines whether the output filter meets a minus 60 dBc requirement or a minus 45 dBc one. Measure the second harmonic on the first article with the balun in place, not on the die alone, because the balun is where the balance is lost.
The same symmetry has a thermal benefit. Two devices on two flanges spread the 123.8 W of heat over twice the contact area of a single device of the same power, which halves the temperature rise across the interface for a given interface quality. That is a real advantage at 1 GHz, where the die is small and the heat flux is high.
Incoming inspection and first article on a push pull part
A pair needs its two devices matched, and the vendor does not publish a matching specification for this row. On the first article, measure the quiescent current of both devices at the same gate voltage, the gain of each in the fixture, and the phase of each leg at the band centre. A 1 dB gain difference between the legs is tolerable; a 10 degree phase difference is not, because it converts directly into second harmonic and into current in the balun.
The incoming inspection plan page covers the electrical sequence. The addition here is the match check between the two devices in a lot, and a note on the report that says whether the pair was tested as a pair or as two singles, because the answer decides whether the fixture result can be used for the next order.
Where the part is bought for a broadcast transmitter, the first article should also record the second harmonic at rated power with the production filter in place, the gain flatness across the 88 to 108 MHz band or across the TV channel, and the case temperature of both flanges at thermal equilibrium. Those three figures are what the acceptance of the second and third order will be judged against.
Questions buyers ask about the HXC50175
Is 230 W the pair or one device? The pair. The row is 115 W times two and the page calls the part 230 W capable. One device is 115 W, 50.61 dBm.
What drive does it need? 7.27 W for 230 W at the published 15 dB. That is a two stage driver, not a single small signal stage.
How efficient is it really? 65 per cent is published on the row, which is rare on this shelf. The heat at that figure is 123.8 W for the pair, and at an assumed 55 per cent it would be 188.2 W. Size the cold plate on the higher number until the first article confirms the lower one.
Does it cover 1 GHz? The row and the page both state HF to 1000 MHz. No typical table is published, so the top of the band is stated rather than measured, and the balun at 1 GHz has to be verified on the fixture.
What is the thermal resistance? Not published. The page says low thermal resistance, which is a description and not a figure, so the junction temperature cannot be computed from the row alone.
Is there a document? No data sheet is linked and no orderable addendum is published. The 200 W single ended row on the same shelf has a full document, which is the format to ask for here.
For price and lead time on the HXC50175 with the 140 W pair as a lower power alternate, send the quantity and the sub band to the RF component sourcing desk. Where the part replaces an incumbent push pull device, start from the cross reference page, and where several matched pairs are needed for one transmitter, the RF supply page sets out how a matched set is bought.