HXC40029
Product Specifications
HXC40029
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HXC40029 from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HXC40029: twelve and a half watts at 38 per cent at 6.4 to 7.2 GHz
The HXC40029 is the third member of the 6.4 to 7.2 GHz group in the Hisiwell gallium arsenide internally matched family, and it repeats the output and efficiency of the 5.8 to 6.7 GHz part one band lower while giving up a decibel of gain. The window is 799 MHz, 11.76 per cent fractional at a 6.8 GHz centre. The vendor states in-plane matching synthesis and thin film hybrid integration, with 50 ohm at both ports. The index row reads 6.4 to 7.2 GHz, saturation output not printed, output at 1 dB compression at least 41 dBm, gain at least 9 dB, drain efficiency at least 38 per cent, 10 V drain rail, plus or minus 0.8 dB flatness, continuous wave.
41 dBm at compression is 12.59 W. On 10 V the DC input is 33.13 W, the drain current 3.31 A and the heat 20.54 W. The drive is 1.58 W at 32 dBm rather than the 1.26 W the lower band part needs at the same output, and that 25 per cent rise in drive power is the whole cost of moving up in frequency on this ladder.
The bandwidth is narrower than the 5.8 to 6.7 GHz window at 799 MHz against 900 MHz, and the fractional figure falls from 14.40 to 11.76 per cent. A channel plan that spans the whole window still fits, but a plan that spans both windows does not, which is why systems that need both use two parts or a switch.
The parameter rows Hisiwell publishes for HXC40029
| Part class | Gallium arsenide internally matched power transistor |
| Matching technique, as stated by the vendor | In-plane matching synthesis, thin film hybrid integration |
| Frequency range | 6.4 to 7.2 GHz |
| Bandwidth, calculated | 799 MHz, 11.76 per cent fractional at a 6.8 GHz centre |
| Output at 1 dB compression as published | at least 41 dBm |
| Output at 1 dB compression in watts, calculated | 12.59 W |
| Saturation output power as published | not published, the index prints a slash in that column |
| Gain as published | at least 9 dB |
| Drain efficiency as published | at least 38 per cent |
| Drain voltage | 10 V |
| Input and output impedance, as stated by the vendor | 50 ohm at both ports |
| Flatness across the band | plus or minus 0.8 dB |
| Operating mode | continuous wave |
| Drive power for the compression point, calculated | 32 dBm, 1.58 W |
| DC input at compression, calculated | 33.13 W |
| Drain current at compression, calculated | 3.31 A at 10 V |
| Dissipation at compression, calculated | 20.54 W |
| Dissipation if efficiency reaches 50 per cent, calculated | 12.59 W |
| Output per 100 MHz of the band, calculated | 1.57 W |
| Load voltage at compression into 50 ohm, calculated | 25.09 V RMS, 35.48 V peak |
| Thermal resistance, junction to case | not published |
| Package outline and dimensions | not published in text, the product page carries one outline image |
| Scattering parameters | not published |
| Gate bias point and quiescent current | not published |
| Operating and storage temperature | not published |
| Orderable addendum, marking and packing | not published |
| Neighbour one step below at 39 dBm | HXC40028, 35 per cent, 2.27 A |
| Neighbour one step above at 44 dBm | HXC40030, 35 per cent, 7.18 A |
One decibel of gain costs twenty five per cent more drive
The interesting comparison is across bands rather than within one. This part and the HXC40025 both deliver 12.59 W at 38 per cent on 10 V, and the only significant difference is the gain: 9 dB here against 10 dB there. A 1 dB drop in gain means the drive has to rise from 1.26 W to 1.58 W for the same output, which is 25 per cent more power through the driver, the interstage filter and the connector.
That difference is what usually decides the architecture. If the driver is a packaged amplifier with 2 W of output available, either band works. If the driver was sized tightly for the lower band, moving to 6.4 to 7.2 GHz needs a new driver or a stage of gain added ahead of it, and the added stage brings its own heat and its own compression point.
There is a second order effect worth knowing. The 1 dB of gain is lost at the band edge before it is lost at the centre, so the drive requirement at 7.2 GHz is higher than the 32 dBm average. A driver that measures 32 dBm at 6.8 GHz and 31.2 dBm at the top of the band leaves no margin at all, and the usual symptom is a transmitter that meets its output in the middle of the band and falls short at the top.
The efficiency is identical, so the thermal side does not change: 20.54 W of dissipation for 12.59 W of output means the plate and the interface are the same on both bands. Systems that need both windows can therefore share a thermal stack and a feed arrangement and only change the transistor and the small signal parts around it.
The upper C band in a real system
6.4 to 7.2 GHz covers the upper fixed service channels and the government links above the commercial satellite band. In a fixed link the modulation is dense and the linearity requirement sets the operating point several decibels below compression, which at this power means the DC input stays near 33 W while the output falls to 6 or 8 W. The heat is therefore set by the supply voltage and the bias, not by the delivered power, and a plate sized for the compression case is the right plate.
In a satellite feeder link the transmit power is controlled by the hub, and the amplifier spends most of its life backed off. The 38 per cent figure is still the one that sets the cold plate, because the current does not fall in step with the drive on a gallium arsenide device.
Linearity data is absent again. For a dense modulation link a two tone measurement plus an adjacent channel measurement on the first article is the only basis for a back off figure, and it is worth doing at the band edges rather than at the centre, because the match and the gain both move there.
Mismatch at 12.59 W reflects about 1.4 W back at a 2 to 1 load. A circulator with a load is the standard protection, and on a continuous wave part at this power the circulator also protects the die from an antenna fault that would otherwise be a repair rather than a fuse.
Where this member sits
Between the 39 dBm and the 44 dBm members, this part is the one most line ups choose when the requirement lands between 8 and 20 W. The step down is 2 dB and the step up is 3 dB, so a system with a 2 dB margin either side of 12.59 W is squarely inside this member.
The family view is on our RF power transistor cross reference page, and the questions we ask before quoting a two stage line up are on the guide to choosing an RF amplifier page. The RF component sourcing page covers how a driver and a final stage are qualified as a pair.
Questions buyers ask before ordering HXC40029
Will a lower band driver work at 6.4 to 7.2 GHz? Only if it has a decibel of margin to spare. The drive requirement rises from 1.26 W to 1.58 W between the two bands at the same output, so a driver sized to the lower band is at its limit here.
Is the bandwidth enough for a 6.425 to 7.125 GHz link plan? The window is 6.4 to 7.2 GHz, so it covers that plan with 250 MHz at the top and nothing at the bottom. A plan that starts at 5.9 GHz needs the other member.
Does the part need a circulator? It is not required by the vendor material, but at 12.59 W a 2 to 1 mismatch reflects 1.4 W into the output, and on an antenna that can be disconnected the circulator is cheap insurance.
How do we start? Send the output required, the modulation, the ambient at the base plate and the rail available. We will confirm the family member that fits, quote from the current factory schedule and ship a sample with measured output, gain and efficiency across the band.