HX2090808GX
Product Specifications
HX2090808GX
Hisiwell — Discrete & Power Semiconductors
Product Overview
The HX2090808GX from Hisiwell is a discrete power semiconductor delivering efficient switching and power conversion. Hisiwell is a recognized semiconductor supplier providing reliable components for global electronics manufacturing.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- Low Rds(on) for minimal conduction losses in power switching
- Fast switching speed with low gate charge for high-frequency operation
- Avalanche-rated for robust operation under inductive load conditions
- High junction temperature rating for demanding environments
- Logic-level gate drive compatible for simplified design
- RoHS and AEC-Q101 qualified options available
Key Specifications
| Vds / Vce | V |
| Id / Ic | A |
| Rds(on) / Vce(sat) | mΩ |
| Qg | nC |
| Technology | — |
| Package | — |
| Configuration | — |
| Mounting | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HX2090808GX: the 80 W, 0.7 to 1 GHz pulsed LDMOS row and how its name is published
HX2090808GX is a Hisiwell LDMOS power transistor that appears in the vendor LDMOS table as a 0.7 GHz to 1 GHz, 80 W part with 19 dB of gain, 65 percent drain efficiency and a 28 V rail, in pulsed mode. The number sits in the UHF region that carries 700 MHz to 960 MHz cellular equipment, the 868 MHz and 915 MHz industrial bands, UHF television and a range of tactical data links, where a pulsed 80 W device is the middle of a transmitter chain rather than the top of it.
There is one thing about this part number that has to be said before anything else. The vendor table row that the site index carries under HX2090808GX points at a product page whose live version now prints the same row under the number HXC50203, with identical figures: 0.7 GHz to 1 GHz, 80 W, 19 dB, 65 percent, 28 V, pulse. Either the vendor renamed the row and kept the page, or the two numbers describe the same position in the table and one of them is the package or market variant. The row identity is therefore not settled by the table alone, and a purchase order on this number should state the figures as well as the number until the vendor document confirms which name the shipment carries.
Everything else on this page comes from that row plus the arithmetic that follows from it. The table prints band, output, gain, efficiency, rail and mode, and prints nothing about pulse width, duty cycle or thermal resistance, so those three are named as gaps rather than filled with numbers this page cannot support.
What a pulsed 80 W part means at 0.7 to 1 GHz
80 W is 49.03 dBm. In a pulsed system the number that sizes the supply is the peak power, because the rail has to deliver 49 dBm of RF during the pulse and recover before the next one. At 65 percent efficiency the DC input during the pulse is 123 W, which at 28 V is 4.4 A. The average current is that figure multiplied by the duty cycle, so a 10 percent duty system draws 440 mA average while delivering 8 W of average RF.
The heat follows the same split. During the pulse the device turns 43 W into heat; at 10 percent duty the average heat is 4.3 W, which is a modest thermal problem for a flange of this size. At 50 percent duty the same device turns 21.5 W of average heat into the flange, and the heatsink has to be sized for that instead. The table does not print the duty cycle, so the first question to the vendor document is the pulse width and the duty the 80 W figure is quoted at. Without those two numbers the heat calculation is a guess with a decimal point.
The band is the part that decides the application. 0.7 GHz to 1 GHz covers the lower UHF cellular bands, the 868 MHz and 915 MHz industrial, scientific and medical bands, and a large part of the tactical radio spectrum. In all of those the antenna is broadband and the load is not always 50 ohm, which is where the ruggedness of an LDMOS die earns its place over a higher gain technology.
The 0.7 to 1 GHz neighbourhood in the same table
| Part number | Band | Output | Gain | Efficiency | Rail | Mode |
| HXC50069 | 0.7 GHz to 1 GHz | 270 W | 15 dB | 65 percent | 28 V | CW |
| HXC50203 | 0.7 GHz to 1 GHz | 80 W | 19 dB | 65 percent | 28 V | Pulse |
| HX2090808GX | 0.7 GHz to 1 GHz | 80 W | 19 dB | 65 percent | 28 V | Pulse |
| HXC50061 | 0.7 GHz to 2.7 GHz | 15 W | 19 dB | 60 percent | 28 V | Pulse |
| HXC50062 | 0.7 GHz to 2.7 GHz | 30 W | 20 dB | 60 percent | 28 V | Pulse |
| HXC50187 | 0.96 GHz to 1.2 GHz | 250 W | 14 dB | 55 percent | 32 V | CW |
| HXC50131 | 0.96 GHz to 1.2 GHz | 90 W | 14 dB | 55 percent | 50 V | Pulse |
| HXC50184 | 1.0 GHz to 2.0 GHz | 40 W | 12 dB | 50 percent | 28 V | CW |
| HXC50070 | 1.2 GHz to 1.7 GHz | 45 W | 20 dB | 68 percent | 28 V | Pulse |
Three readings from that block. The 19 dB of gain is the highest in the 0.7 GHz to 1 GHz group, which is why this row is attractive as a driver or a mid stage: a 20 dB gain stage before it produces about 29 dBm and drives it to saturation with margin. The 270 W row above it gives up 4 dB of gain for the extra power, so a cascade built from both needs the driver sized for the loss. And the rows that go to 2.7 GHz give up efficiency, 60 percent against 65, which is the price of the wider band.
The figures for this row
| Function | LDMOS RF power transistor, flange mount |
| Frequency band | 0.7 GHz to 1 GHz |
| Output power | 80 W, which is 49.03 dBm |
| Gain | 19 dB |
| Drain efficiency | 65 percent at the rated output |
| Drain voltage | 28 V nominal |
| Operating mode | Pulsed |
| Pulse width | Not printed in the category table |
| Duty cycle | Not printed in the category table |
| DC input during the pulse | 123 W at 65 percent efficiency, 4.4 A from 28 V |
| Heat during the pulse | 43 W |
| Average heat at 10 percent duty | 4.3 W, which needs a small heatsink |
| Average heat at 50 percent duty | 21.5 W, which needs a real heatsink |
| Average RF at 10 percent duty | 8 W |
| Technology | Laterally diffused MOS on a silicon substrate |
| Matching | Input and output matched on the package |
| Package | Flange mount, screw down |
| Thermal resistance | In the device document, not in the category table |
Pulsed operation and the things that break first
The pulse is a supply problem before it is an RF problem. During a 100 microsecond pulse the rail has to hold 4.4 A without drooping, and the energy comes from capacitors close to the flange, not from the regulator. A rail that droops during the pulse flattens the top of the envelope and shows up as a spectral regrowth failure that is easy to blame on the device and hard to find.
The second failure mode is the gate. In a pulsed system the gate bias has to be stable during the off period and settle before the next pulse, and a bias network with a long time constant will produce a gain that walks from the first pulse to the hundredth. That is why the bias feed for a pulsed LDMOS stage is built around the duty cycle, not only the average current.
The third is the load. An LDMOS die is rugged, but a mismatch combined with a full pulse and a hot flange is where the safe area is actually tested. A circulator or an isolator after the device is the usual protection, and its insertion loss, typically 0.3 dB to 0.5 dB at this band, has to be in the output budget from the start.
The name on the purchase order
Because the table row is published under two numbers, the practical rule for a buyer is to state the number and the figures together. A purchase order that says HX2090808GX, 0.7 GHz to 1 GHz, 80 W, 19 dB, 28 V, pulsed is unambiguous even if the vendor ships a device whose label carries the other name. A purchase order that says only the number invites a shipment that matches the number and not the row.
What we do on a number in that state is confirm the name the vendor will use on the shipment before the order is placed, quote the date code, and hold the traceability record. If the requirement can be met by either name, the quote says so; if the programme's approved parts list carries only one of the two, the quote says which one we can supply and what the alternative would need in paperwork.
Related pages: RF power transistor cross reference for the naming and alternative question, how to choose an RF amplifier for the stage budget, defense grade components for traceability on a tactical programme, and RF procurement for the supply route.
Questions buyers ask about this number
Is the duty cycle 10 percent. The table does not print it. Ten percent is used on this page only as a worked example to show how the average heat scales, and the real figure has to come from the device document. A heatsink sized from an assumed duty cycle is a heatsink that may be half the size it should be.
Can this part run continuous wave. The row says pulsed, and a pulsed row used continuously is outside its characterisation. The continuous wave rows at this band are the 270 W HXC50069 and the 250 W HXC50187, and both of them are different devices with different gain and different rails.
What is the incoming check. Marking and date code against the order, flange flatness, and a curve tracer sample if the programme asks. The RF output is measured in the fixture the product uses, by a laboratory, not at goods inwards.