Contact Us

LTM8074EY#PBF

Brand: Analog Devices
Analog Devices LTM8074EY#PBF is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

LTM8074EY#PBF — Analog & Mixed-Signal ICs | Superb Automation

LTM8074EY#PBF

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The LTM8074EY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

LTM8074EY: the 4 mm module for equipment that never goes below freezing

The LTM8074EY#PBF is the commercial grade of the 4 mm by 4 mm 40 V step-down module, 1.2 A continuous and 1.75 A peak, 0.8 V to 12 V out, 200 kHz to 2.2 MHz. Everything about the electrical table is shared with the industrial code: the 774 mV reference, the 48.9 degrees per watt thermal path, the 3 microamp shutdown current. The one line that moves is the guarantee, which starts at 0 degrees instead of -40. That makes this the code to specify for a bench instrument, a rack unit or a mains powered product, where the ambient is a room and the cold start question never comes up.

Published values

ParameterValue
Input range3.2 V to 40 V
Output range0.8 V to 12 V
Continuous current1.2 A
Peak current1.75 A at 3.3 V out, 1 MHz
Feedback voltage774 mV typical, 760 mV to 786 mV over the guaranteed range
Switching frequency200 kHz to 2.2 MHz
Guaranteed range0 to +125 degrees internal, TJ maximum 125 degrees
Shutdown current3 microamps
No load current8 microamps not switching
Output ripple15 mV at 1.2 A
Line and load regulation0.5 percent and 0.5 percent
Package4 mm by 4 mm by 1.82 mm BGA, 0.08 g
Thermal48.9 degrees per watt to ambient, 17.2 to the board
FinishSAC305 RoHS ball, tin lead available under the same device code

A 0 to 125 degree part in a 25 degree rack

Inside a chassis the ambient at the module is rarely the room temperature. A 1U unit with a 40 degree inlet and no direct airflow over the board can see 70 degrees at the part, which leaves 55 degrees of junction headroom and, at 48.9 degrees per watt, 1.12 W of dissipation. That is better than the 85 degree case and it is why the same 1.2 A rating that looks tight on paper is comfortable in a ventilated box.

The measurement that settles it is a thermocouple on the package top during a full load soak, with the lid on. Junction temperature from the top of the package uses the 33.4 degrees per watt top path, and it is the fastest way to know whether the thermal budget in the note above is being met.

Why the 1.82 mm height is worth the thermal cost

Mounting on the underside of the board puts the module in the shadow of the components above and uses space that would otherwise be a keep out. On a dense instrument board that is often the difference between fitting the power stage and adding a second board. The 0.08 g weight also means the part survives the shock and vibration of a portable unit without extra staking.

The price is that the heat now has to leave through the board, so the copper under the part and the thermal vias are part of the electrical bill of materials. A four layer board with a solid ground plane under the module performs close to the 17.2 degrees per watt board path; a two layer board with a broken plane does not, and the difference shows up as a hot spot rather than as a failed test.

What the E grade means for a service replacement

A field replacement kit holds one order code. If the installed base mixes E and I grade modules, the service part should be the I grade, because it covers both specifications and the cost difference is small against the logistics of stocking two codes. The reverse, shipping an E grade against an I grade drawing, is the mistake that turns into a warranty argument in a cold climate.

Both codes carry the same device marking, so the reel label is the only place the grade is visible. Keep the label with the reel and record it at incoming inspection.

Where a customer needs a second position on this part, how to verify a drop in replacement is the starting point, the power management cross reference sets out the checks a substitution has to pass, and vendor consolidation is the short lead time route we quote against.

Two questions buyers ask about the E grade

Does the E grade have a different package? No, same 4 mm by 4 mm by 1.82 mm body, same ball out, same MSL 3 floor life. Only the guaranteed temperature window and the test coverage behind the data sheet limits change.

Is the peak current affected by the grade? No. The 1.75 A figure is a silicon and inductor limit at 3.3 V out and 1 MHz, and it is identical on both codes. What differs is the temperature at which the surrounding limits are promised.