Contact Us

ADF4159CCPZ

Brand: Analog Devices
Analog Devices ADF4159CCPZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADF4159CCPZ — Analog & Mixed-Signal ICs | Superb Automation

ADF4159CCPZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADF4159CCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADF4159CCPZ: 13 GHz Is the Input Band, and the Ramp Rate Comes From the Phase Detector

The ADF4159 is a fractional N synthesizer with modulation and waveform generation, an RF input specified to 13 GHz, a 25-bit fixed modulus and a phase frequency detector that runs to 110 MHz. It has no voltage controlled oscillator inside, which is the first thing a radar bill of materials has to account for: the 13 GHz figure is the divider input, and the loop still needs its VCO, its loop filter and its reference. The second thing is that the sweep rate of an FMCW ramp is set by the phase detector frequency and the modulus, not by the RF input range.

Sub hertz steps and a fast ramp are in tension

The 25-bit modulus is what buys sub hertz resolution, but the resolution depends on the phase detector frequency: at 110 MHz, one modulus step is 110 MHz divided by 33.55 million, which is about 3.3 Hz, not sub hertz. To reach a step below 1 Hz the phase detector has to come down to roughly 30 MHz, and every halving of the phase detector frequency doubles both the step time and the in band phase noise contribution. A radar that wants 1 MHz of sweep in fine steps therefore trades ramp repetition rate against frequency resolution, and the register values that matter are the phase detector divider, the ramp clock divider and the frequency deviation word.

BlockPublished limitEffect on the loop
RF input13 GHzPrescaler and divider headroom, not output power
Phase detector110 MHz maximumStep size and ramp clock granularity
Modulus25 bits fixedResolution floor once the phase detector is chosen
Normalized noise floorMinus 224 dBc per hertz as a headline, minus 217 in the tableIn band noise after 20 log N is added
Analog supply2.7 V to 3.45 VCharge pump headroom
Digital supply1.62 V to 1.98 VSeparate rail, sequenced with the analogue one

Current draw and the two rail split

At 110 MHz of phase detector frequency the part draws 26 mA to 40 mA from the analogue rail, 7.5 mA to 10 mA from the digital rail and 5.5 mA to 7 mA from the charge pump rail. The split matters because the digital rail is 1.8 V and the analogue rail is 3.3 V: a board that ties them together will run the digital block at 3.3 V, outside its published range, and the SPI will still work well enough to hide the mistake until temperature testing. The charge pump pin VP must also stay within the specified window relative to AVDD, since the pump output has to swing inside it.

Ramp features that save external parts

Sawtooth, triangular and parabolic sweeps can be generated on chip, two different sweep rates can be programmed in one ramp, and a delay between ramps is available. Frequency readback and an interrupt pin let the host confirm where the ramp actually is without an extra counter. Cycle slip reduction shortens lock time without changing the loop filter, which is the one feature that matters when a sweep has to settle fast between segments. Each of those removes a small amount of external logic, and together they are the reason a single chip radar front end is possible.

The supply question when the family is short

This part is qualified for automotive use and is one of the few 13 GHz synthesizers that generates ramps without an external sawtooth source. A shortage here is not solved by a plain fractional N synthesizer, because the waveform engine is the point. The RF component sourcing page covers the synthesizer class, the LNA selection guide covers the receive chain that sits on the same board, and the component lead time solutions page covers the long lead time case.