LTM4630IY#PBF
Product Specifications
LTM4630IY#PBF
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The LTM4630IY#PBF from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
LTM4630IY#PBF: dual 18 A, remote sense and a 1.5 percent error over temperature
The LTM4630IY#PBF is the I grade of the dual 18 A module in the 16 mm by 16 mm by 4.41 mm ball grid array with SAC305 balls and MSL 3, weighing 3.2 g. It runs from 4.5 V to 15 V in, delivers 0.6 V to 1.8 V per channel at 18 A, and is pin compatible with the LTM4620, LTM4620A and LTM4628, so a board can move between 13 A, 18 A and 8 A parts without a revision. The I grade is -40 C to 125 C and the total DC error is 1.5 percent over line, load and temperature.
Published values
| Parameter | Value |
|---|---|
| Input voltage | 4.5 V to 15 V |
| Output setting for 0.6 V | feedback pin open |
| Output setting for 1.0 V | 90.9 k |
| Output setting for 1.2 V | 60.4 k |
| Output setting for 1.5 V | 40.2 k |
| Output setting for 1.8 V | 30.2 k |
| Output current | 18 A per channel, 36 A tied |
| Junction to ambient | 7 C/W, 1.5 C/W to case bottom |
| Pin compatible with | LTM4620, LTM4620A, LTM4628 |
| Temperature monitor | internal diode for device temperature |
Pin compatibility as a supply chain tool
A board built for this package can take the LTM4620 or LTM4620A at 13 A per channel or the LTM4628 at 8 A, so a build that cannot get the 18 A part can ship at a lower current rating without a board change, provided the load allows it. That is a real second source inside one vendor's family, and it is the kind of thing worth writing into a bill of materials note before a shortage rather than after one.
What does not transfer is the current: a rail specified at 18 A per channel and built with an 8 A part will pass a functional test and fail in the field. The substitution has to be a documented decision with the load current rechecked, not a purchasing convenience.
1.5 percent over temperature is the whole error budget
The total DC output error is specified over line, load and temperature at 1.5 percent, which on a 1.2 V rail is 18 mV. That is the number to put in a system budget, and it already includes the reference drift, the amplifier offset and the load regulation that a discrete regulator would list separately.
The differential remote sense amplifier is what makes the figure hold at the load rather than at the module pins. Without the sense connection a 1 V rail at 18 A through 1 milliohm of copper loses 18 mV before the load, which is a full 1.5 percent on its own; the sense pair removes that term from the budget.
Thermal, and the 3.2 g package
The package is quoted at 7 C/W junction to ambient with 1.5 C/W to the case bottom, and the vendor's measured examples come out at 6.0 and 6.2 C/W, so the table is close to reality. At 12 V to 1.0 V and 18 A the output is 18 W and 2.22 W of loss at 89 percent is a 15.6 C rise, which is a comfortable number for a 16 mm square body.
The internal temperature diode is there because the junction is not accessible and the package is large enough to have a gradient across it. Reading the diode gives the die temperature directly, which is what a derating calculation needs, rather than the case temperature that a thermocouple on the lid reports.
Burst mode, tracking and what they are for
Burst mode keeps the light load efficiency up, and the tracking pin lets one rail follow another during power up. On a board with a core rail and an I/O rail, tracking is what prevents a latch up path through the I/O cells while the core is still coming up.
The output overvoltage protection and the overcurrent foldback are the two fault responses the part carries. Foldback is not a hard current limit: a shorted output sees a lower current than the trip point on the bench, and a system that expects a 30 A ceiling during a fault should measure it rather than assume it.
The pages that answer this most often are the power management cross reference for the family alternatives, the pin to pin cross reference for the acceptance test, and vendor consolidation for the case where a replacement has to be fitted before the next build.
Two questions buyers ask
Can the LTM4628 be fitted to a board specified for this part? Mechanically yes, since the packages are pin compatible. Electrically the channel current drops from 18 A to 8 A, so the load has to be rechecked and the substitution documented.
What does the internal temperature diode measure? The die temperature, not the case. That is the number a derating calculation needs, and it is more useful than a thermocouple on the package lid.