Contact Us

ADRF5720BCCZN-R7

Brand: Analog Devices
Analog Devices ADRF5720BCCZN-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADRF5720BCCZN-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADRF5720BCCZN-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADRF5720BCCZN-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADRF5720BCCZN-R7: half a decibel steps across four decades of bandwidth

The ADRF5720 is a silicon digital attenuator covering 9 kHz to 40 GHz in 0.5 dB steps up to 31.5 dB, controlled over a serial or parallel interface, in a 24 terminal 4 by 4 mm land grid array. Insertion loss is 2.0 dB to 18 GHz, 2.8 dB to 26 GHz and 4.5 dB to 40 GHz, attenuation accuracy is plus or minus 0.20 dB plus 1 percent of the set state to 18 GHz, and the input compression point is 30 dBm in the insertion loss state and 27 dBm in every other state. It settles to within 0.1 dB of the final output in 8 microseconds and is pin compatible with the faster switching version, the ADRF5730.

What the vendor page states

ParameterValue
Frequency range9 kHz to 40 GHz
Attenuation range0.5 dB steps to 31.5 dB, six bits
Insertion loss2.0 dB to 18 GHz, 2.8 dB to 26 GHz, 4.5 dB to 40 GHz
Accuracyplus or minus 0.20 dB plus 1 percent of state to 18 GHz, 1.5 percent to 26 GHz, 3 percent to 40 GHz
Step errorplus or minus 0.25 dB typical to 26 GHz, 0.65 dB to 40 GHz
Compression30 dBm in the insertion loss state, 27 dBm in other states
Intercept50 dBm typical
Power handling27 dBm average, 30 dBm peak
Settling8 microseconds to 0.1 dB
Control and packageserial and parallel, 24 terminal 4 by 4 mm land grid array

The bit weights add to 31.5, and the accuracy grows with the state

Six binary weighted cells of 0.5, 1, 2, 4, 8 and 16 dB sum to 31.5 dB and give 63 attenuation states plus the reference path. The accuracy specification is a fixed term plus a proportional one, so at 0.5 dB the allowance is 0.205 dB, at 4 dB it is 0.24 dB, at 16 dB it is 0.36 dB and at 31.5 dB it is 0.515 dB. Read the other way, the relative error falls as the state grows, and a system that only ever uses the first 6 dB of range is paying for a part whose best accuracy sits at the top of its range. A receiver that needs 30 dB of gain control in 0.5 dB steps is exactly the application this ladder was built for.

Two decibels of insertion loss is the price of the first state

Even at zero attenuation the part inserts 2.0 dB to 18 GHz, and 4.5 dB at 40 GHz. In a receive chain that loss sits ahead of the first amplifier and adds directly to the noise figure, so a system with a 1.5 dB low noise amplifier and this attenuator in front of it starts at 3.5 dB before any attenuation is applied. Two of them in cascade is 4 dB. That is the argument for placing the attenuator after the first gain stage wherever the compression point allows it: the 27 dBm handling at other states is generous enough that the placement is usually a noise decision rather than a power one.

Fifty decibels of intercept against twenty seven of handling

A 50 dBm output intercept with 27 dBm of average power handling is 23 dB of headroom, which means the part stays linear well beyond the power it is allowed to dissipate. Twenty seven dBm is 501 mW and 30 dBm peak is 1 W, and the difference between those two numbers is what protects the part from a pulse. The 8 microsecond settling, meanwhile, caps how fast a gain control loop can hop between states: a radar or a frequency hopping radio that needs a new attenuation every few microseconds is at the edge of this part and should be looking at the fast switching sibling that shares the pinout.

Before the order goes out

The frequency range starts at 9 kHz, which is unusual for a part that reaches 40 GHz and matters in a direct conversion chain where the local oscillator leakage sits near DC. The RF component sourcing page lists the attenuator and switch alternatives by band and control interface, the pin to pin cross reference covers the fast switching version that drops into the same land pattern, and the analog and mixed signal category page holds the rest of the RF control family.

Request Quote — In Stock, 100% New & Original, Full Warranty