Contact Us

HMC787ALC3B

Brand: Analog Devices
Analog Devices HMC787ALC3B is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HMC787ALC3B — Analog & Mixed-Signal ICs | Superb Automation

HMC787ALC3B

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The HMC787ALC3B from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

HMC787A: A Passive Mixer Whose Conversion Loss Is the First Thing to Budget

The HMC787A is a passive double balanced mixer in a 12 terminal ceramic leadless chip carrier, covering 3 GHz to 10 GHz, usable as an upconverter or a downconverter with an intermediate frequency from dc to 4 GHz. It needs no external components and no matching circuitry, and it is driven by a local oscillator at +17 dBm. Passive means it converts by switching, not by amplifying, so the conversion loss of about 9 dB is not a defect: it is the price of the topology, and it sets the noise figure of everything behind it.

What the isolation and loss figures mean together

ParameterValueConsequence in a radio
Radio frequency range3 GHz to 10 GHzCovers the 5 GHz and 6 GHz links and the lower X band
Intermediate frequencydc to 4 GHzDown to baseband, or up to a high intermediate frequency
Conversion loss9 dB typical from 3 GHz to 9 GHzAdded directly to the noise figure of the following stage
Local oscillator to RF isolation43 dB typicalKeeps the LO out of the antenna when the mixer is used as an upconverter
RF to IF isolation26 dB typicalLimits how much of the received signal bypasses the conversion
Input intercept and compression+24 dBm and +17 dBmSets the maximum input before the mixer itself compresses
Second order intercept+67 dBm typicalMatters when the two input tones are close in frequency

Nine dB of loss is an amplifier you have to add

A cascade calculation with a 9 dB loss first element gives a system noise figure that is at least 9 dB before any gain is counted. That is why a passive mixer is never the first device in a receive chain: the low noise amplifier comes first, and its gain has to be enough to overcome the mixer loss and the filter loss around it. If the low noise amplifier gives 15 dB and the filter in front of the mixer takes 2 dB, the mixer contributes about a tenth of a dB to the system figure, which is the point at which the choice between a passive and an active mixer stops being about noise and starts being about linearity.

The local oscillator drive is a real requirement

An LO drive of +17 dBm is 50 mW. A synthesizer integrated circuit typically delivers between 0 dBm and +5 dBm at its output, so an amplifier and often a filter sit between the synthesizer and this port. Undersizing that amplifier does not just reduce the conversion gain. It raises the conversion loss and it degrades the isolation, because the balun structures inside the mixer rely on a hard driven switching action. A mixer that measures 3 dB worse than the data sheet usually has 10 dB less LO drive than the data sheet.

Down to dc, with the usual caveats

An intermediate frequency that reaches dc allows a direct conversion receiver, with the image falling on the wanted signal and no image filter required. The cost is that the local oscillator leakage appears as a dc offset, and the flicker noise of the following baseband amplifier sits right where the information is. Direct conversion is a good fit for wideband data and a poor fit for a signal whose energy is concentrated near dc.

Sourcing a mixer that is being phased out

Mixer substitutions are harder than amplifier substitutions because the ports are not interchangeable in impedance and the LO drive level is part of the specification. The RF component sourcing page lists the mixer family by band, the defense grade components page covers the screened grades used in radar and electronic warfare, and the pin to pin cross reference page checks the footprint of a candidate before a board change is considered.