HMC362S8GETR
Product Specifications
HMC362S8GETR
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The HMC362S8GETR from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
HMC362S8GETR: Divide by Four Prescaler for Loops Up to 12 GHz
The HMC362S8GETR is a static divide by four prescaler that takes an input from DC to 12 GHz and delivers the divided signal at a low phase noise floor, in an 8-lead plastic surface mount package. It exists so that the phase detector in a synthesiser can run at a frequency it can handle while the oscillator runs in X band. Boards that use it are usually frequency generators, satellite terminals or point to point radios.
What the part is
A static divider built in indium gallium phosphide heterojunction bipolar technology, which is why it works down to DC with a square wave input and does not need a minimum input frequency to start. Additive single sideband phase noise is -149 dBc per hertz at a 100 kHz offset from a 6 GHz input, so the divider adds very little to the loop noise budget. Output power is -6 dBm typical at an 11 GHz input, output transition time is 100 ps, and the device runs from a single +5 V supply at 68 mA. Reverse leakage with both outputs terminated is 60 dB.
Key parameters
| Parameter | Value |
|---|---|
| Division ratio | 4 |
| Maximum input frequency | 12 GHz minimum, 13 GHz typical |
| Minimum input frequency | 0.2 GHz typical for a sine wave, DC for a square wave |
| Input power, 1 GHz to 8 GHz | -15 dBm to +10 dBm |
| Input power, 8 GHz to 10 GHz | -10 dBm to +3 dBm |
| Input power, 10 GHz to 12 GHz | -5 dBm to 0 dBm |
| Output power | -6 dBm typical at an 11 GHz input |
| Phase noise | -149 dBc per hertz at a 100 kHz offset |
| Output transition time | 100 ps typical |
| Reverse leakage | 60 dB typical |
| Supply | +5 V at 68 mA |
What the numbers mean on a board
The input window narrows as frequency rises: 25 dB of range from -15 dBm to +10 dBm between 1 GHz and 8 GHz collapses to 5 dB from -5 dBm to 0 dBm between 10 GHz and 12 GHz, so a driver that is comfortable at S band will not necessarily drive this part at X band. Dividing 12 GHz by four gives a 3 GHz output at -6 dBm, which is a level most phase detectors accept but which leaves little margin if the loop needs a limiter. At 68 mA from 5 V the divider dissipates 340 mW, and reverse leakage of 60 dB means the output side does not feed back into the oscillator to any meaningful degree.
Where it is used
- Prescalers in satellite communication synthesisers
- Point to point and point to multipoint radio loops
- Fibre optic and VSAT terminal frequency generation
- Instrumentation and signal generators up to X band
Divider behaviour that surprises a first build
A static divider needs a clean edge and enough drive. The input window narrows with frequency, so a source that delivers +10 dBm at 2 GHz may deliver 0 dBm at 11 GHz through the same matching network, which puts it at the edge of the window. The second surprise is the output level: -6 dBm is a logic compatible level for many phase detectors but not for all, and a detector that needs more will need a buffer. The third is the low frequency end. The part divides down to DC with a square wave input, which is useful for testing, but a sine wave below 200 MHz will not reliably toggle it. The fourth is the supply: 68 mA from a 5 V rail is small, yet the decoupling has to be local because the divider draws current in bursts at the output rate.
Sourcing notes and next step
The S8GE suffix is the RoHS compliant 8-lead plastic body, and the divider is sensitive to the input drive level rather than to the part number, so boards returned from the field usually need the drive checked before the device is replaced. The selection criteria for dividers and amplifiers in the same signal chain are on the RF amplifier selection page, and RF grade sourcing options are on the RF component sourcing page. The full catalogue is on the analog and mixed signal family page. Send the input frequency and drive level you use, plus the quantity, and we confirm stock and date code.
HMC362S8GETR: what dividing by four does to the noise, and the 340 mW it costs
A divider does two things to a synthesiser loop at once. It brings the oscillator frequency down to something a phase detector can compare, and it improves the phase noise by the division ratio: dividing by four is 20 log of 4, which is 12.04 dB. So the published minus 149 dBc per hertz at a 100 kHz offset from a 6 GHz input corresponds to about minus 137 dBc per hertz referred back to the input. That twelve decibels is not a trick, it is the reason a prescaler in front of a phase detector is preferred to a detector that runs at X band.
| Item | Value for this part | What it means in a loop |
|---|---|---|
| Division | 4 | 12.04 dB of phase noise improvement, and a comparison at a quarter of the frequency |
| Input range | DC to 12 GHz, 13 GHz typical | Static, so a square wave input works down to dc without a minimum frequency |
| Input power | Minus 15 to plus 10 dBm at 1 to 8 GHz | 5 dB of range at 10 to 12 GHz, so the driver has to be set |
| Output | Minus 6 dBm at an 11 GHz input | 2.75 GHz at a level a detector accepts, with little margin for a limiter |
| Phase noise | Minus 149 dBc per hertz at 100 kHz | About minus 137 dBc per hertz referred to the input |
| Supply | 5 V at 68 mA | 340 mW in an 8 lead plastic body |
The input window narrows where the part is used
Between 1 GHz and 8 GHz the input can be anything from minus 15 dBm to plus 10 dBm, a 25 dB window, and between 10 and 12 GHz that window is minus 5 dBm to 0 dBm, five decibels wide. A driver that was comfortable at S band will not necessarily drive this part at X band, and the difference is not the gain of the driver but the level it happens to deliver. The practical instruction is to set the drive level at the top of the band and check it with a power meter rather than to infer it from a datasheet gain figure.
Static means the loop can be swept through dc
Because the divider is static, it works from dc with a square wave input and needs no minimum input frequency, which is what allows a synthesiser to be swept through a band without losing lock at the low end. A dynamic divider would have a minimum frequency and a settling behaviour after each step, and neither appears here. That is also why the part is used in frequency generators and satellite terminals, where the loop has to hold over a wide tuning range.
Three hundred and forty milliwatts in eight leads
Sixty eight milliamps at 5 V is 340 mW, which an 8 lead plastic package handles through its leads and the board copper rather than through a pad. Reverse leakage of 60 dB with both outputs terminated is the isolation that keeps the output from feeding back into the oscillator, and on a board where the divider sits close to the VCO that figure is what decides the spurious floor. The range of dividers and synthesiser parts is listed on the RF component sourcing page, the comparison before a divider is replaced is under obsolete RF part replacement, and stock is quoted from the amplifiers and comparators index.
Request Quote — In Stock, 100% New & Original, Full Warranty