ADUM7642CRQZ-RL7
Product Specifications
ADUM7642CRQZ-RL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADUM7642CRQZ-RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADUM7642CRQZ-RL7: one kilovolt of barrier, four channels one way and two the other
The ADuM7642 is a six channel digital isolator built on the iCoupler transformer process, in a 20 lead QSOP, with a 1 kV rms isolation rating and a 4/2 channel split: four channels carry signals in one direction and two in the other. The split is not arbitrary. It is the shape a serial peripheral interface needs, clock, data out and chip select going forward and data in coming back, with two spare channels left over for a ready line and a fault line. Data rate is 25 Mbps NRZ, both supplies can sit anywhere from 3.0 V to 5.5 V independently, and the part is rated to 105 C.
What the vendor page states
| Parameter | Value |
|---|---|
| Channels | six, four in one direction and two in the other |
| Isolation rating | 1000 V rms for one minute, UL 1577 |
| Data rate | 25 Mbps NRZ maximum |
| Supply | 3.0 V to 5.5 V on either side, level translation between the two |
| Current per channel | 3.3 V: 1.6 mA maximum at 0 to 1 Mbps, 7.8 mA at 25 Mbps |
| Current per channel | 5 V: 2.2 mA maximum at 0 to 1 Mbps, 11.2 mA at 25 Mbps |
| Pulse width distortion | under 6 ns, C grade |
| Transient immunity | over 15 kV per microsecond common mode |
| Default state | output high when input power is absent |
| Package and grade | 20 lead QSOP, operation to 105 C |
One kilovolt is a functional barrier, and the datasheet says so
The page states plainly that this family costs less than the 2.5 kV and 5 kV parts and is meant for functional isolation, the kind that breaks a ground loop between two boards on the same chassis rather than the kind that stands between a person and mains. Read as a sine wave, 1 kV rms is 1414 V peak, held for one minute in the UL 1577 test. That is a working voltage, not a reinforced barrier, and a circuit that puts this part between a 230 V field terminal and a low voltage circuit has misread the rating. Where a mains referenced barrier is needed the same channel count exists at 2.5 kV and 5 kV in wider packages, and the footprint change is the price of the higher rating.
Six channels at 25 Mbps is 336 mW
At 5 V and 25 Mbps each channel draws 11.2 mA maximum, so six channels draw 67.2 mA and 336 mW. At 3.3 V the same six channels draw 46.8 mA and 154 mW. Drop the clock to 1 Mbps and the figures fall to 13.2 mA and 66 mW at 5 V, or 9.6 mA and 32 mW at 3.3 V. Worked per unit of traffic, that is 2.24 mW per Mbps per channel at 5 V, and it is the number to put beside a competing isolator when the comparison is made at the actual clock rate rather than at the headline rate. A bus that runs at 1 Mbps and is quoted at its 25 Mbps current will look twice as expensive as it is.
The 15 kV per microsecond transient immunity figure matters more than the current in a motor drive, because it sets how much of a switching node's edge the barrier can ignore without corrupting a bit. A 400 V edge in 20 ns is 20 kV per microsecond, above the rating, which is why the routing of the barrier capacitance and the return path decides whether the part works in that cabinet.
Six nanoseconds of pulse width distortion inside a forty nanosecond bit
At 25 Mbps one bit is 40 ns, and 6 ns of pulse width distortion is 15 percent of the bit, which is what leaves room for the cable, the receiver threshold and the clock recovery on the other side. At 1 Mbps the bit is 1000 ns and the same 6 ns is 0.6 percent, so the distortion figure only becomes interesting at the top of the rate range. The default output high state is the other specification that gets missed: with the input side unpowered every output reads high, so a chip select line that idles high is safe and an active low enable that idles high is not, and the polarity of each channel has to be checked against that default before the board is committed.
Before the order goes out
The ADuM7640, 7641 and 7643 share the die and the package and differ only in channel direction split, so a line that reads 3/3 or 5/1 somewhere in the bill of materials will put the wrong part on the board while looking identical. The pin to pin cross reference lists the isolators that share this 20 lead footprint, the BOM shortage recovery page is where to start when this package is on allocation, and the analog and mixed signal category page holds the rest of the isolation family.
Request Quote — In Stock, 100% New & Original, Full Warranty