Contact Us

ADG702BRTZ-REEL7

Brand: Analog Devices
Analog Devices ADG702BRTZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG702BRTZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

ADG702BRTZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG702BRTZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADG702BRTZ-REEL7: a 2 ohm normally open SPST switch that works from 1.8 V to 5.5 V

What this order code is

ADG702BRTZ-REEL7 is a single pole single throw CMOS analogue switch in a small SOT23 body on a reel. It is the normally open member of a two part group: with a logic one on the control pin the ADG701 closes and the ADG702 opens, so the 702 is the part that is open with the control pin high and closed with it low. Each switch conducts equally well in both directions when it is on, which is what allows the same part to gate a signal, discharge a capacitor or short a node to a reference. The BRT string is the SOT23 body and REEL7 is the reel.

The supply range is the reason this switch turns up in portable boards. It runs from a single 1.8 V to 5.5 V rail and is fully specified at 3 V and at 5 V, so the same order code works on a 1.8 V logic rail, a 3.3 V rail and a 5 V rail without a level translator on the control pin. On resistance is 2 ohm typical, with a 3 ohm maximum at 5 V and a 5 ohm maximum at 3 V, and the flatness over the signal range is 1 ohm maximum, which is the figure that decides whether the switch can sit in a signal path rather than only in a switching role.

Parameters as published

ItemValue
ConfigurationSPST, normally open
Supplysingle 1.8 V to 5.5 V
On resistance, typical2 ohm
On resistance, maximum at 5 V3 ohm
On resistance, maximum at 3 V5 ohm
On resistance at 1.8 V40 ohm typical
Flatness over signal range1 ohm maximum
Bandwidth at 3 dBabove 200 MHz
Turn on time18 ns
Turn off time12 ns
Signal rangerail to rail
Power consumptionbelow 0.01 uW
Control levelTTL and CMOS compatible
Body6-lead SOT23, 5-lead and 8-lead also listed

Numbers that decide the application

The 2 ohm typical on resistance is quoted at 5 V, and the same part at 1.8 V is 40 ohm typical. The ratio is twenty, and it changes what the switch can be used for. Into a 1 kohm load the 5 V figure is 0.2 percent of gain error and the 1.8 V figure is 3.8 percent, so a board that moved the rail down to save power has moved a precision path into a coarse one without changing a single component value. Into a 100 ohm load the 5 V part is 1.96 percent and into 10 ohm it is 16.7 percent, which is the point where the switch becomes part of the load and the network has to be recalculated.

Switching time is small compared with the period of any audio or control signal, but it is not zero. Eighteen nanoseconds on and 12 nanoseconds off is 30 ns for a complete cycle, which is 0.3 percent of a 10 microsecond frame at 100 kHz and 3 percent of a 1 microsecond frame at 1 MHz. The bandwidth above 200 MHz is a small signal figure into a matched load, and the switch capacitance with the load resistance sets the settling time of whatever follows, so a 2 ohm switch driving a 100 pF sample capacitor still has an RC of 200 ps and is not the limiting element.

The power figure of 0.01 microwatt is 10 nW, which at 5 V is 2 nA of supply current. The static consumption is therefore not a line item, and the part behaves as a wire with a small series resistance that costs nothing until it is switched. What does cost current is the charge that moves on every transition through the digital input capacitance, so a control line driven at a high frequency is the real consumption and not the switch itself.

Where it fits and where it does not

It fits signal gating, gain switching, sample and hold front ends, battery powered instruments, audio routing, and any place where a small switch has to work from a rail that may be 1.8 V or 5 V. It does not fit a signal path that has to stay accurate on a 1.8 V rail, because 40 ohm is large compared with the resistors around it, and it does not fit a fault tolerant input where the signal can exceed the supply, because the switch has no overvoltage protection. It is also the normally open member, so a circuit that expects a switch closed at power up needs the ADG701 and not this code.

Supply and second source questions

The questions that come back on this code are about the normally open and normally closed pair, the on resistance at a low rail and the body. The 701 and the 702 are the same die with opposite control sense, so a substitution between them inverts the function of the whole circuit while every pin still fits. The parts that share the pinout and the ones that only look similar are separated on the drop in replacement check page.

Sourcing notes and next step

We quote this code against the bill of materials and check the eight fields that decide the line: configuration, on resistance grade, supply range, body, packing, control level and the operating temperature. Where the exact code is short we will say so rather than ship the normally closed member and invert the control logic on the customer board. Send the line items, quantities and required date through the BOM shortage recovery page and we will answer with availability. The broader part list sits on the analog and mixed signal IC page.

Two Ohms Where It Matters: Gain Error, Flatness and the Leakage at 85 C

A 2 ohm switch is a good switch until it is put in series with a signal. Then the 2 ohm is a gain error, and the 1 ohm of flatness across the signal range is a distortion term, and the leakage that is invisible at 25 C becomes the dominant error at 85 C. The ADG702BRTZ-REEL7 publishes all three numbers - 2 ohm typical, 3 ohm maximum at 5 V, 5 ohm maximum at 3 V and 1 ohm maximum of flatness - and the useful exercise is to put them into a circuit.

The on resistance as a fraction of the load

Two ohms in series with a 10 kohm path is 0.02 percent of gain error, which is below the tolerance of most resistors in the same network. Two ohms into 1 kohm is 0.2 percent, which is where a 12 bit measurement starts to see it. Two ohms into 100 ohm is 2 percent, and at 3 V the 5 ohm maximum into 100 ohm is 5 percent. The same part is therefore invisible in a high impedance path and dominant in a low impedance one, and the 5 V to 3 V supply change moves the error by a factor of 1.7 before temperature is counted.

Flatness is the term that matters for a signal, not for a switch

Flatness of 1 ohm maximum means the resistance changes by up to 1 ohm as the signal swings across the supply range. In a 1 kohm path that is 0.1 percent of gain change over the signal, which is a second harmonic of about minus 66 dB for a full swing. In a 10 kohm path it is minus 86 dB, below the level of most converters. The flatness figure is why this part belongs in a signal path only above a few kilohms of load, and why using it to short a node to a reference is a different and much easier application.

The leakage doubles every ten degrees, and that is the 85 C answer

Off leakage is specified in the nanoamp range at 25 C. A leakage current in a junction roughly doubles for every 10 C of temperature, so a 0.1 nA part at 25 C is about 6.4 nA at 85 C, six doublings away. Into a 1 Mohm node that is 6.4 mV of error, and into 10 Mohm it is 64 mV. The switch that measures perfectly on the bench at room temperature therefore fails a high impedance sample and hold at the top of the industrial range, and the fix is a lower impedance or a different switch topology rather than a tighter tolerance on the same part.

Path resistance2 ohm at 5 V5 ohm at 3 V1 ohm flatness
100 ohm2 percent5 percent1 percent
1 kohm0.2 percent0.5 percent0.1 percent
10 kohm0.02 percent0.05 percent0.01 percent
100 kohm0.002 percent0.005 percent0.001 percent

Normally open is a choice about the power up state

The 702 is open with the control pin high and closed with it low, and the 701 in the same family is the other way round. A board that loses its control rail during a reset therefore has a defined state either way, and which state is safe is an application question: a switch that discharges a capacitor on power down wants to close when the control is low, and a switch that protects a front end wants to open. The control input accepts the same 1.8 V to 5.5 V range as the switch, so a 1.8 V logic line can drive a 5 V signal path without a translator.

What to check on a second source

The pinout of a single SPST in SOT23 is not standard across families: the control pin and the two switch terminals are assigned differently, and a part with the same 2 ohm headline can put the control pin where the ground pin was. The analog and mixed-signal IC page lists the switches on the line card, the pin to pin cross reference page covers the assignments, and the BOM shortage recovery page is where a mixed requirement is quoted with the alternatives named.

Request Quote — In Stock, 100% New & Original, Full Warranty