AD7606BBSTZ-RL
Product Specifications
AD7606BBSTZ-RL
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7606BBSTZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7606BBSTZ-RL: eight channels sampled at once, at 305 microvolts per count
The AD7606B is an eight channel data acquisition system with a 16 bit converter behind every channel, simultaneous sampling at 800 kSPS on all eight, an input buffer with 5 Mohm analog input impedance, and per channel selectable bipolar ranges of plus and minus 10 V, plus and minus 5 V and plus and minus 2.5 V. It runs from a single 5 V analog supply with a separate 1.71 V to 3.6 V digital supply, clamps its inputs at plus and minus 21 V with 8 kV of ESD protection, and is pin compatible with the earlier AD7606.
What the vendor page states
| Parameter | Value |
|---|---|
| Resolution and rate | 16 bit, 800 kSPS on all eight channels |
| Input impedance | 5 Mohm buffered, per channel |
| Ranges | plus and minus 10 V, plus and minus 5 V, plus and minus 2.5 V, selectable per channel |
| Supply | 5 V analog, 1.71 V to 3.6 V digital |
| Oversampling | digital filter with ratios up to 256 |
| Input protection | plus and minus 21 V clamp, 8 kV ESD |
| Drift | 1 ppm per degree full scale error, typical |
| Diagnostics | calibration and diagnostics in software mode |
| Temperature range | minus 40 C to plus 125 C |
Three hundred and five microvolts, and what eats it
On the plus and minus 10 V range the full span is 20 V, so one 16 bit count is 305 microvolts. Two error terms sit close to that size. A 1 kohm source resistance in front of the 5 Mohm input divider produces a 0.02 percent gain error, which is 2 mV at full scale, or 6.6 counts. The 1 ppm per degree full scale drift produces 2 mV over a 100 C excursion, which is another 6.6 counts. Put together, a system that ignores both is 13 counts away from the truth before the converter's own noise is counted, and a system that calibrates at one temperature and measures at another has 6.6 of those counts left over.
Six and a half million samples per second of bus traffic
Eight channels at 800 kSPS is 6.4 million samples per second in total, which at 16 bits is 102.4 Mbit/s of raw data and the reason the part has a parallel interface as well as serial options. The sample period is 1.25 microseconds, and a complete set of eight simultaneous samples covers exactly 10 microseconds. Any controller that cannot absorb 102.4 Mbit/s has to use the oversampling filter or a slower rate, and the choice has to be made at the system level, not at the converter.
Oversampling buys sixteen times the noise performance at 3.1 kSPS
A ratio of 256 divides the throughput down to 3125 samples per second per channel and improves the signal to noise ratio by the square root of 256, which is 16, or 24 dB. That is the trade for a vibration or power quality channel that does not need speed: run the converter wide open and average in software, or use the on chip filter and let the converter do it. The on chip route also removes the need to store eight channels of raw data in the controller, which in a small controller is the difference between fitting and not fitting.
Before the order goes out
The input clamp at plus and minus 21 V is what lets this part sit behind a field connector without a second protection stage, but the clamp is a survivability rating and not an accuracy one, and the 5 Mohm input means the source sees a light load rather than a sampling capacitor. The converter cross reference lists the pin compatible members of this family including the 18 bit version, the lead time page is the place to check when this package is on allocation, and the analog and mixed signal category page holds the rest of the precision converter family.
Request Quote — In Stock, 100% New & Original, Full Warranty