Contact Us

AD835ARZ-REEL7

Brand: Analog Devices
Analog Devices AD835ARZ-REEL7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD835ARZ-REEL7 — Analog & Mixed-Signal ICs | Superb Automation

AD835ARZ-REEL7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD835ARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD835ARZ-REEL7: a 250 MHz multiplier whose noise is 26 counts wide

The AD835 is a four quadrant voltage output multiplier that computes W equal to XY plus Z from three high impedance inputs, on a dielectrically isolated complementary bipolar process. Both multiplication inputs and the summing input accept plus and minus 1 V, the output delivers up to plus and minus 2.5 V and drives loads down to 25 ohm, and the whole function runs from plus and minus 5 V with almost no external parts. The minus 3 dB output bandwidth is 250 MHz, small signal rise time is 1 ns, and a full scale step settles to 0.1 percent in 20 ns.

What the vendor page states

ParameterValue
FunctionW equals XY plus Z, four quadrant
Input rangeplus and minus 1 V on X, Y and Z, high impedance differential
Outputup to plus and minus 2.5 V, drives 25 ohm
Bandwidth250 MHz at minus 3 dB
Rise time1 ns small signal; 2.5 ns full scale rise and fall with a 150 ohm load
Settling20 ns to 0.1 percent
Multiplier noise50 nV per root hertz
Supplyplus and minus 5 V nominal
Package8 lead small outline, industrial temperature

Twenty nanoseconds is the update rate, not the bandwidth

A 20 ns settling time to 0.1 percent of a 2 V full scale is 2 mV of residual error, and it caps a multiplying digital to analog chain at 50 MHz of update rate whatever the 250 MHz small signal bandwidth suggests. The two numbers answer different questions: bandwidth says how fast a sine passes, settling says how soon the output can be trusted after a code change. A buyer building a gain control loop, an amplitude modulator or a wattmeter should size the loop around 50 MHz and treat the 250 MHz figure as the point where the gain has already fallen 3 dB.

Fifty nanovolts over 250 MHz is 791 microvolts

Fifty nanovolts per root hertz integrated across the full 250 MHz is 791 microvolts rms. On a 2 V full scale that is 25.9 counts of a 16 bit converter, or 63.6 counts of a 12 bit converter, and on a 1 V full scale it doubles. Band limit the output to 100 MHz and the figure falls to 500 microvolts, which is the practical argument for putting a filter between this part and any converter behind it. The multiplier's own noise is then comparable to a good converter's, which is a different position from a simple amplifier whose noise is a fraction of a count.

The output stage, the load and the heat

Plus and minus 2.5 V into 25 ohm is 100 mA and 0.25 W delivered to the load, which is more than the quiescent dissipation of the part itself and enough to make the load resistor, not the multiplier, the warm component on the board. Most applications drive 150 ohm or 1 kohm, where the current falls to 16.7 mA and 2.5 mA and the full scale rise and fall times in the table apply. The Z input makes the part usable as a summing junction as well as a multiplier, so a system that needs XY plus an offset does not need a second amplifier, but the Z input is high impedance and floating it is not the same as grounding it.

Before the order goes out

The AD834 in the same family is a current output multiplier with a wider bandwidth and a different output interface, so the two are not interchangeable on an existing board even where the arithmetic function is the same. The amplifier cross reference lists the multiplier and divider alternatives by function and output type, the obsolete part hub is where the older multiplier parts in this family are tracked when the vendor changes their status, and the analog and mixed signal category page holds the rest of the analog function blocks.

Request Quote — In Stock, 100% New & Original, Full Warranty