ADG659YRUZ-REEL7
Product Specifications
ADG659YRUZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADG659YRUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADG659YRUZ-REEL7: Four Differential Inputs Into One Pair, 45 Ohm On Resistance
What this part is
The ADG659 is a complementary metal oxide semiconductor analog multiplexer that switches one of four differential inputs to a common differential output, selected by two address lines with an enable pin that turns every channel off. It is the differential member of a pair: the ADG658 does the same job with eight single ended inputs. Both are built for rail to rail signal handling, so the input range extends to the supply rails rather than stopping a diode drop short, and both switch with a break before make action so that two channels are never connected at the same instant.
The supplies can be plus and minus 5 V, a single 5 V or a single 3 V rail, and the digital inputs have thresholds from 0.8 V to 2.4 V, which makes them compatible with transistor transistor logic and with 5 V complementary metal oxide semiconductor logic on either a single or a split supply. Power consumption is under 0.1 uW, which is what allows the part to sit in a battery instrument without a shutdown pin.
Published figures that matter to a buyer
| Configuration | differential 4 to 1 multiplexer |
| Address lines | A0 and A1, plus an enable |
| On resistance | 45 ohm over the full signal range |
| Leakage | under 0.1 nA |
| Supplies | plus and minus 2 V to plus and minus 6 V, or 2 V to 12 V single |
| Signal range | rail to rail |
| Switching | break before make |
| Logic thresholds | 0.8 V to 2.4 V, TTL and CMOS compatible |
| Power | under 0.1 uW typical |
| Temperature | minus 40 to plus 125 degrees C |
| Package | 16 lead TSSOP, tape and reel |
| Second source shape | upgrades 74HC4051, 74HC4052, MAX4051, MAX4052, MAX4581 and MAX4582 |
Where the headline numbers stop
Forty five ohms is a low on resistance for a multiplexer, but it is still a resistor in series with the signal. Into a 10 kohm load it is 0.45 percent of gain error, which is acceptable in a monitoring path. Into a 1 kohm load it is 4.5 percent, and at 1 mA of signal current it is 45 mV of drop across the switch. The part belongs in front of a high impedance buffer or a converter input, not directly driving a low impedance load.
The leakage and the settling behaviour are the other two numbers. Under 0.1 nA of leakage into a 1 Mohm source impedance is 0.1 mV of offset, which is small; into a 10 Mohm source it is 1 mV and starts to matter. The switch resistance with the load capacitance sets the settling: 45 ohm into 10 pF is a 450 ps time constant, and into 100 pF it is 4.5 ns, so a converter with a large sample capacitor needs either a longer acquisition window or a buffer between the multiplexer and the converter. The break before make action adds a dead time between channels, which is a real interval where the output floats.
Applications where it fits
- Data acquisition systems that scan several differential sensor pairs into one instrument amplifier.
- Automatic test equipment that routes signals between a measurement channel and a device under test.
- Battery powered instruments where the part draws nanoamps and has no shutdown pin to control.
- Audio and video signal routing where a differential path has to be selected without a common ground shift.
Two questions buyers ask
Can it replace a 74HC4052 directly? The vendor lists this part as an upgrade to the 74HC4052 and to several MAX4052 style parts, and the function and the 16 lead outline match. The differences are in the on resistance over the full signal range and in the leakage, both better here. The external circuit still has to be checked for the address line levels and the enable polarity, because those are the fields where second sources in this class differ.
What happens when the enable pin is low? All channels are off, which puts the output in a high impedance state rather than at a defined level. A converter or amplifier behind the multiplexer will therefore see its own bias network at that moment, and if that network is slow the output may drift before the next channel is selected. The enable pin is a useful way to isolate a faulty channel but it is not a way to park the output at a known voltage.
Sourcing notes and next step
ADG659YRUZ-REEL7 is the 16 lead TSSOP on tape and reel. The single ended version is a different part number, and the differential version is what a two wire sensor path needs. The analog and mixed signal IC family page lists the switch and multiplexer line, the ADI part second source page covers how a multiplexer substitute is qualified, and the BOM shortage recovery page sets out the route when a switch is short for a build.
ADG659YRUZ-REEL7: 45 ohm into a 10 k load is 0.45 percent, into 1 k it is 4.5 percent
A multiplexer is a resistor in series with the signal, and the only question that matters is what that resistor is compared with. The same 45 ohm part is invisible in one circuit and a four percent gain error in another. This block puts the on resistance against the load, then looks at the two terms that a first order calculation misses: the flatness of the resistance over the signal range and the charge the switch injects when it moves.
The load decides whether 45 ohm matters
Forty five ohm into a 1 k load is 4.5 percent of the total path, into 10 k it is 0.45 percent, and into 100 k it is 0.045 percent. A channel that feeds a high impedance buffer is therefore unaffected, and a channel that feeds a 1 k resistor network has already spent four percent of its accuracy on the switch. The usual fix is a buffer after the multiplexer rather than a lower resistance part, because the buffer also removes the load dependent term that changes when a different channel is selected.
Flatness is the term that turns resistance into distortion
The resistance is not constant across the signal range: a few ohms of variation over the full swing is typical. Into 10 k that variation is 0.05 percent, which is a small gain modulation but a real one for a signal that swings at the input frequency, and into 1 k it is 0.5 percent, which is audible or visible depending on the application. For a signal that is measured rather than passed through, flatness matters less than the absolute value, because the measurement is taken at one point on the range.
Leakage and charge injection set the floor and the step
Leakage of 0.1 nA into a 1 megohm source impedance is 0.1 mV of offset, which is small next to a 10 mV signal and large next to a 100 microvolt one. Charge injection is the larger effect for a switched measurement: 5 pC into a 100 pF hold capacitor is a 50 mV step, and into a 10 nF capacitor it is 0.5 mV. That single number decides the hold capacitor value, and it is the reason a multiplexer in front of a converter has a capacitor at the converter input rather than at the switch.
| Load | 45 ohm as a fraction | 5 ohm flatness as a fraction | Verdict |
|---|---|---|---|
| 1 k | 4.5 percent | 0.5 percent | Needs a buffer after the switch |
| 10 k | 0.45 percent | 0.05 percent | Usable for 8 bit class measurements |
| 100 k | 0.045 percent | 0.005 percent | Leakage becomes the limit |
Switch resistance and leakage across the family are compared on ADI part second source, the grade and package codes are on pin to pin cross reference, and the hold capacitors and buffers around it are on one stop BOM sourcing.
Request Quote — In Stock, 100% New & Original, Full Warranty