Contact Us

ADG5434BRUZ

Brand: Analog Devices
Analog Devices ADG5434BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG5434BRUZ — Analog & Mixed-Signal ICs | Superb Automation

ADG5434BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG5434BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG5434BRUZ: four changeover switches with break before make

The ADG5434BRUZ packages four independent single pole double throw switches in a 20-lead TSSOP. All four channels break before make, so two sources are never shorted together during a changeover, which is the property that puts this order code into channel switching on live transducer lines rather than into simple disconnect duty.

Published values

ParameterValue
Channels4 SPDT, break before make
Supply9 V to 22 V dual, 9 V to 40 V single
Absolute maximum supply48 V
On resistance13.5 ohm typ
Charge injection176 pC typ at 15 V rails
Off isolation-60 dB at 1 MHz
Supply current50 uA typ
ESD8 kV human body model
Package and range20-lead TSSOP, -40 C to +125 C

What break before make protects

In a changeover switch without a break before make interval, the old channel and the new channel conduct together for the duration of the overlap. If both sides are driven, that overlap is a short between two sources. With a 13.5 ohm switch and two 10 V sources, the current during the overlap is set by the sum of the two on resistances, about 370 mA, which is enough to damage a signal source and certainly enough to disturb the measurement.

The ADG5434 is specified to break first. The cost is a short interval in which the common node is open, so the load sees an interruption. In a gain switching or channel selection path that interruption is harmless. In a power path it has to be checked against the hold up of whatever follows.

Charge injection and the 20-lead body

176 pC typical on 15 V rails into a 1 nF hold capacitor is 176 mV of step, and into 100 pF it is 1.76 V. The four channels share one package, so the return currents of all four flow through the same ground pins: the ground connection of the package has to be treated as part of the analog path, not as a digital return.

The supply current is 50 uA typical, which is small against the charge that moves during a changeover. That is the correct way to read the two figures: the static budget is microamps, the dynamic disturbance is picocoulombs per transition, and the second one is what the converter sees.

Where four changeovers are the right count

Four SPDT channels fit a two channel differential front end exactly, one changeover per leg, or a single ended front end with a gain or attenuation choice on each of four inputs. In both cases the part replaces four relays and their coil drivers, and the 48 V absolute maximum supply rating lets the switch sit on the same rail as the relay coils it replaced.

Avionics, instrumentation and audio or video routing are the application list on the data sheet, and the reason is the same in all three: the switch has to pass a signal that is not referenced to its own ground, and it has to survive a fault on that signal line.

Substitution checks

The ADG5433 is the three channel member of the same family in a smaller body, and the pin out is not the same, so it is not a substitute for a board that needs four changeovers. A quad SPDT from a lower voltage family will fit nothing without a board change unless the footprint matches.

The checks are channel count and configuration, break before make behaviour, then supply span and package. The pages below list the family alternatives, the verification sequence and the obsolescence route.

Where a customer needs a second position on this part, the pin to pin cross reference is the starting point, the ADI second source page sets out the checks a substitution has to pass, and the obsolete part cross reference hub is the short lead time route we quote against.

Two questions buyers ask

Does the ADG5434 need external logic level shifting? No. The digital inputs are 3 V logic compatible across the full supply range, at 2.0 V high and 0.8 V low, and there is no separate logic supply pin.

Are all four channels independent? Yes. Each channel has its own control pin and its own pair of throws, and the four break before make timings are specified per channel.