HMC1197LP7FETR
Product Specifications
HMC1197LP7FETR
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The HMC1197LP7FETR from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
HMC1197LP7FETR: a modulator, a fractional divider and a VCO in one package, at last time buy
The HMC1197 is a wideband direct quadrature modulator with an integrated fractional N phase locked loop and voltage controlled oscillator, covering 100 MHz to 4000 MHz. It takes baseband in phase and quadrature inputs and produces a modulated carrier, with the local oscillator generated inside the package from a single reference. The vendor states a minus 160 dBm per hertz noise floor, a plus 30 dBm output intercept, a plus 10.5 dBm output compression point, a maximum phase detector rate of 100 MHz, and in band phase noise of minus 110 dBc per hertz. Its product status on the vendor page reads last time buy, which is the first line a buyer should read.
What the vendor page states
| Parameter | Value |
|---|---|
| Function | direct quadrature modulator with fractional N phase locked loop and VCO |
| Frequency range | 100 MHz to 4000 MHz |
| Noise floor | minus 160 dBm per hertz |
| Output intercept | plus 30 dBm |
| Output compression | plus 10.5 dBm at 1 dB |
| Phase detector rate | 100 MHz maximum |
| Phase noise | minus 110 dBc per hertz in band, typical |
| Package | 40 lead 7 by 7 mm surface mount |
| Life cycle | last time buy on the vendor page |
Last time buy changes the question from price to quantity
A part in last time buy is not a sourcing problem in the ordinary sense, because the vendor has stopped taking new orders and whatever is in the channel is what exists. For a production line still building this modulator, the task becomes a bridge quantity: estimate annual usage, multiply by the years the product will stay in service, add the attrition from rework, and buy that in one order. For a new build the same page is a red flag and the substitute list matters more than the datasheet, which is why the cross reference matters here and not the price.
The noise floor and the phase noise set different things
Minus 160 dBm per hertz spread across a 20 MHz channel is minus 87 dBm of in band noise, and across a 200 kHz channel it is minus 107 dBm. Those figures decide the error vector magnitude of a wideband signal, while the minus 110 dBc per hertz phase noise at 10 kHz offset decides adjacent channel leakage and, integrated from 10 kHz to 1 MHz, comes to about minus 50.5 dBc. A buyer comparing this part against a discrete modulator plus synthesizer should compare the two figures separately, because a chain that wins on the noise floor can lose on the close in phase noise and the composite result depends on the channel width.
Thirty decibels of intercept against ten and a half of compression
An output intercept of plus 30 dBm with compression at plus 10.5 dBm leaves 19.5 dB between the two, and that spacing is what keeps a two tone test clean: at 0 dBm per tone the third order products land at minus 60 dBc, at minus 6 dBm per tone at minus 78 dBc, and at plus 5 dBm per tone at minus 45 dBc. The part can be run at its compression point without the modulation quality collapsing, which is why transmit chains using it often skip the driver amplifier that a discrete modulator would need.
One hundred megahertz of phase detector and 5.32 octaves of tuning
Covering 100 MHz to 4000 MHz is 5.32 octaves from one package, and the fractional divider is what makes the loop usable at both ends: at 4000 MHz with a 100 MHz phase detector the integer ratio is 40, so a 1 ppm frequency step is 4 kHz and only a fractional loop can resolve it. A discrete alternative needs a VCO bank, a loop filter and a modulator, which is four assemblies and their matching, against one package here. The trade is that the loop filter and the reference are inside the vendor's characterisation, so a system that needs a unusual loop bandwidth has less freedom than it would with separate parts.
Before the order goes out
The I and Q inputs are baseband and DC coupled, so a system that needs to hold carrier suppression has to control the DC offset of both, and the vendor's carrier suppression figure assumes that is done. The RF component sourcing page covers the modulator and synthesizer alternatives by band, the obsolete part hub tracks the last time buy parts in this family and their bridge quantities, and the analog and mixed signal category page holds the rest of the RF signal chain.
Request Quote — In Stock, 100% New & Original, Full Warranty