Contact Us

ADG5408BRUZ

Brand: Analog Devices
Analog Devices ADG5408BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG5408BRUZ — Analog & Mixed-Signal ICs | Superb Automation

ADG5408BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG5408BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG5408BRUZ: eight to one multiplexer for high voltage signal chains

The ADG5408BRUZ is the 16-lead TSSOP member of the ADG5408/ADG5409 pair, an eight to one CMOS multiplexer built on a trench isolated process that the vendor specifies as latch up proof. Buyers arrive at this order code for two reasons. It survives an input that is driven while the card is unpowered, and it holds its on resistance flat across a 44 V span, which is what test equipment and avionics racks need when a channel can be live before the supplies come up.

Published values

ParameterValue
Channels8 single ended to 1 common (ADG5409 is 4 differential)
Supply9 V to 22 V dual, 9 V to 40 V single
Absolute maximum supply48 V
On resistance13.5 ohm typ, 15 ohm max at 25 C
On resistance at 125 C22 ohm max
On resistance flatness2.2 ohm typ
Charge injection115 pC typ
Turn on time140 ns typ, 242 ns max
Off isolation-60 dB at 1 MHz
Supply current55 uA max
ESD8 kV human body model
Logic levels2.0 V high, 0.8 V low, no VL pin
Package and range16-lead TSSOP, -40 C to +125 C

What the 13.5 ohm figure leaves out

The headline on resistance is a 25 C typical. The same table gives 15 ohm maximum at 25 C and 22 ohm maximum over the full -40 C to +125 C range, so a channel that reads 13.5 ohm on the bench carries 63 percent more resistance in a hot enclosure.

Into a 10 kohm load that is 0.135 percent of gain error cold and 0.22 percent hot, which is acceptable for a monitor path. Into a 1 kohm load the same switch is 1.35 percent and 2.2 percent, which is no longer a resistor divider you can ignore. The match between channels moves as well: 0.3 ohm typical at 25 C against 1.4 ohm maximum at 125 C, so two channels of one package used as a differential pair drift apart with temperature.

Charge injection against converter resolution

115 pC of charge injection into a 100 pF hold capacitor is a 1.15 V step. Into 1 nF it is 115 mV. One LSB of a 12-bit converter on a 5 V reference is 1.22 mV, so the multiplexer alone is not a sample and hold: either the hold capacitor is large enough that the step is small against the signal, or a buffer sits between the switch and the converter.

The acquisition window is set by turn on time, quoted at 140 ns typical and 242 ns maximum at 125 C, plus the settling of whatever drives the switch. At a 1 MSPS conversion rate the window is about half a microsecond, which leaves room for a 242 ns switch if the source impedance is low. At 5 MSPS it does not.

Where the part earns its price

Trench isolation is the reason this family can be specified latch up proof. A dielectric barrier separates the P and N channel transistors, so an overvoltage on an input does not fire the parasitic structure that a junction isolated switch would. With a 48 V absolute maximum on a 22 V rail there is 4 V of headroom over the rail itself, which is what an inductive transducer or a relay coil on the same harness can produce.

The EN pin switches all eight channels off together, so a failing sensor branch can be isolated from the common node without a second package. There is no VL pin, which means the digital thresholds are fixed at 2.0 V and 0.8 V rather than following a separate logic rail. That is convenient with 3 V logic and worth knowing with 1.8 V logic, where 2.0 V is above the driver's high level.

Checks before a reel swap

The ADG5409 shares the package and the process but switches four differential inputs, so it is not a substitute for the single ended part even though the two order codes differ by one digit. Any replacement has to be checked in this order: supply span, on resistance at the temperature the board actually runs at, charge injection against the hold capacitor, then pin out.

A lower voltage member of the same family will fit the footprint and will also remove the overvoltage margin that this part was chosen for, so the supply ceiling has to be the first line read on any candidate data sheet. Family alternatives and the acceptance sequence sit on the pages below.

For a board that has to keep running while a reel runs out, the ADI second source page is where the family alternatives sit, how to verify a drop in replacement is the check list before a substitute goes in, and the pin to pin cross reference is how a gap is covered without a new line item.

Two questions buyers ask

Is the ADG5408BRUZ a drop in for ADG5409BRUZ? No. The pin out is the same package but the internal decode is different: eight single ended channels against four differential channels. The board sees a different signal at the common pins.

Can the switch run from a single 12 V rail? Yes, the single supply range starts at 9 V and goes to 40 V, and the analog signal range then spans 0 V to the rail. The 3 V logic thresholds stay the same because they come from an internal generator.