Contact Us

ADG1434YRUZ

Brand: Analog Devices
Analog Devices ADG1434YRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADG1434YRUZ — Analog & Mixed-Signal ICs | Superb Automation

ADG1434YRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADG1434YRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADG1434YRUZ: four SPDT switches at 4.7 ohm with a shared enable line

The ADG1434YRUZ is the quad SPDT of the ADG1433/ADG1434 family: four independently selectable changeover switches, 4.7 ohm maximum on resistance at 25 C, 0.5 ohm flatness, up to 115 mA continuous current per channel, break before make on every channel, in a 20-lead package.

Published values

ParameterValue
Configurationfour independently selectable SPDT switches
On resistance4.7 ohm maximum at 25 C
Flatness0.5 ohm
Continuous currentup to 115 mA per channel
Supplyplus or minus 15 V, +12 V or plus or minus 5 V
Switchingbreak before make
Package20-lead TSSOP or 4 mm x 4 mm LFCSP

Four changeover channels against four relays

Four signal relays need four coils, four drivers, four catch diodes, and roughly four times the board area of one 20-lead package. They also need a supply that can deliver the coil current, which on a low power instrument is often the largest single load on the rail. The ADG1434 draws almost nothing, switches in nanoseconds and does not wear out.

What the relay still does is survive abuse. A CMOS switch that is connected to a field terminal needs series resistance and a clamp, and it cannot interrupt a fault current. Where the four channels are internal to the instrument, the switch is the better part on every count.

Channel to channel match and crosstalk

Four channels on one die share a process and a temperature, so the match between them is better than four packages can be. On a differential pair that match is what preserves common mode rejection. On four independent channels the parameter that matters is crosstalk: a signal on one channel couples into another through the package and the board, and the coupling is worst at the highest frequency the part passes.

The practical rule is to keep the four channel traces apart, to keep the common return paths separate until they reach the star point, and to avoid running a switching control line parallel to an analog trace for any distance.

Current and thermal arithmetic

At 115 mA through 4.7 ohm the drop is 0.54 V and the dissipation is 62 mW per channel. Four channels at full current is 248 mW in a 20-lead TSSOP, which is within the package rating at ordinary ambient but leaves little margin at elevated temperature. A board that runs all four channels at full current continuously should either spread the load over time, use the LFCSP with its exposed pad, or move to a lower resistance part in the same family.

Where it fits

Audio and video routing, relay replacement, temperature measurement systems, avionics and battery powered instruments that need a wide analog range without coil current. For a board that needs only three channels, the ADG1433 saves the extra pins and the extra channel that would otherwise sit unused.

When an order code in this family cannot be found, defense grade components lists what else does the same job, the obsolete part cross reference hub covers what to check before a part is dropped into an existing board, and vendor consolidation is the route we take on a live shortage.

Two questions buyers ask

Is the ADG1434 pin compatible with the ADG1433? No. The quad needs a 20-lead package and two more control pins. The ADG1433 is a 16-lead part with three channels; a board cannot take one for the other.

What happens to the channels when the enable pin goes low? All four switches open. That is the power down isolation state, and it is the reason the enable pin needs a pull resistor: a floating enable during reset leaves the state undefined.