AD8000YRDZ
Product Specifications
AD8000YRDZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8000YRDZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8000YRDZ: 1.5 GHz Current Feedback With 100 mA of Drive
The AD8000YRDZ is a current feedback amplifier with a 1.5 GHz small signal bandwidth at unity gain and 650 MHz of full power bandwidth at 2 V peak to peak on a gain of two. That pair of numbers implies about 4,080 V per microsecond of output slew, which is what the stage has to deliver to hold a 650 MHz sine at 1 V peak. It settles to 0.1 percent in 12 ns, which is 2 mV on a 2 V step, and it drives 100 mA of load current, so a 50 ohm cable or a video load does not need a separate buffer. Supply range is 4.5 V to 12 V, supply current is 13.5 mA, power down drops that to 1.3 mA, and the package is an 8-lead LFCSP or SOIC.
Published values
| Parameter | Value |
|---|---|
| Small signal bandwidth | 1.5 GHz at a gain of plus one |
| Full power bandwidth | 650 MHz at a gain of two, 2 V peak to peak |
| Settling time | 12 ns to 0.1 percent |
| Input voltage noise | 1.6 nV per root hertz |
| Output current | 100 mA |
| Distortion | 75 dBc spurious free at 20 MHz, 62 dBc at 50 MHz |
| Video | 0.02 percent differential gain, 0.1 dB flatness to 170 MHz |
| Offset voltage | 1 mV typical |
| Supply range | 4.5 V to 12 V |
| Supply current | 13.5 mA, 1.3 mA in power down |
| Bodies | 8-lead LFCSP and 8-lead SOIC |
100 mA changes the supply decision
One hundred milliamps into a 50 ohm load is 5 V peak, or 10 V peak to peak, which cannot come from a single 5 V supply. That single piece of arithmetic decides the rail before anything else: a board that drives 50 ohm loads at full swing needs plus and minus 5 V or a 12 V supply with a mid-scale bias, and the 4.5 V to 12 V range is really a plus or minus 2.25 V to plus or minus 6 V range in that application. It also decides the thermal question, because 13.5 mA at 12 V is 162 mW of quiescent dissipation before any load current, and an 8-lead LFCSP alone in still air will run hot at that level. The exposed pad on the LFCSP is the thermal path, and it has to be soldered to copper, not left floating.
Current feedback and the feedback resistor
Current feedback amplifiers do not have a gain bandwidth product in the voltage feedback sense, so the feedback resistor sets the compensation rather than the closed loop gain. The bandwidth stays high as the gain rises, which is why this part holds 650 MHz at a gain of two and why it is used in variable gain stages where a switched resistor network changes the gain without changing the compensation. The price is that the feedback resistor value cannot be chosen freely for noise or for load: too low and the part becomes unstable, too high and the bandwidth collapses. Boards that substitute a different value because the exact resistor is out of stock are the usual source of oscillation complaints with this family.
What 1.6 nV per root hertz is worth
The voltage noise looks excellent in isolation, and over a 100 MHz measurement bandwidth it is about 20 uV RMS, which is small against a 1 V signal. In a high impedance node the current noise and the resistor noise dominate instead, so the low voltage noise figure pays only when the source impedance is low, which is the case in a 50 ohm video or IF chain. In a transimpedance stage with a 10 kohm feedback resistor the resistor alone contributes about 13 nV per root hertz, so the amplifier's contribution is a small part of the total and the choice should be made on bandwidth and stability instead.
Power down, video flatness and where the part fits
The 1.3 mA power down state is a real reduction from 13.5 mA and it is used to switch an unused output off a shared video bus without a mechanical relay. Flatness of 0.1 dB to 170 MHz and 0.02 percent differential gain are the numbers a composite video path needs, and they are what separates this part from a general purpose high speed amplifier that has the bandwidth but not the gain flatness. On a board being second sourced, the 8-lead SOIC and the LFCSP are not the same footprint, so a substitution has to be checked against the pad geometry before anything else. The amplifier cross reference page groups the current feedback parts by bandwidth and drive, the pin to pin cross reference page lists the bodies that swap, and the how to verify a drop in replacement page covers the checks that stop a substitution from becoming a change to the board.