TPS7A0318PDBVR
Product Specifications
TPS7A0318PDBVR
Texas Instruments — Power Management & Signal Chain
Product Overview
The TPS7A0318PDBVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
TPS7A0318PDBVR: 1.8 V at 200 mA, 200 nA idle, five pin SOT-23
The TPS7A0318PDBVR is the 1.8 V fixed member of the TPS7A03 family from Texas Instruments, the nanopower line with a 200 nanoamp quiescent current, in the five pin SOT-23 body coded DBV. It ships 3000 pieces per reel at moisture level 1 with the marking 21VF, and it delivers 200 mA with 1 percent initial accuracy and 1.5 percent over the full temperature range.
This is the voltage point where the family is easiest to apply. The dropout band from 1.8 V to 2.5 V is 400 mV maximum to 85 degrees and 450 mV maximum over the full range at 200 mA, so a 2.5 V or 3.0 V input runs the rail at full current with margin, and the 1.5 V input floor never comes into play. The quiescent current of 200 nA is eight times the 25 nA of the TPS7A02 branch and still two orders of magnitude below a conventional low dropout part.
Key electrical data for the 1.8 V point
| Output voltage | 1.8 V fixed, plus or minus 1 percent at 25 C and 1.5 percent over -40 to 125 C |
| Output current | 200 mA continuous, current limit 240 mA to 750 mA |
| Input range | 1.5 V to 6.0 V, 2.25 V needed at 200 mA over the full temperature range |
| Quiescent current | 200 nA typical at 25 C, 250 nA maximum, 300 nA maximum to 85 C |
| Dropout | 400 mV maximum at 200 mA to 85 C in the 1.8 V to 2.5 V band, 450 mV over the full range |
| Rejection and noise | 55 dB at 1 kHz and 30 mA, 130 uV RMS at 0.8 V over 10 Hz to 100 kHz |
Package, marking and reel data
| Body | SOT-23 DBV, 5 pins, 2.9 mm by 2.8 mm |
| Reel | 3000 pieces, large tape and reel |
| Finish and moisture | NIPDAU or tin depending on the row, level 1, unlimited floor life |
| Marking | 21VF |
| Thermal resistance | 181.9 C per W junction to ambient in the five pin body |
Where a 1.8 V rail with a 200 nA idle current belongs
The application list is the battery instrument list: wearables, thermostats, smoke and heat detectors, gas and water meters, glucose monitors, pulse oximeters, circuit breakers, security cameras and card readers. A 1.8 V rail at 200 mA feeds a microcontroller, a radio or a sensor, and the idle current sets the shelf life. Two hundred nanoamps is below the leakage of most cells and below the input leakage of most loads, so on a product that sleeps for years the regulator stops appearing in the arithmetic.
The transient behaviour is what allows one rail to serve a burst load. A 1 mA to 50 mA step settles in under 10 microseconds with about 100 mV of undershoot, and the load regulation from 1 mA to 200 mA is 20 mV typical and 38 mV maximum up to 85 degrees, rising to 50 mV maximum over the full range. On a 1.8 V rail 38 mV is 2.1 percent, so a load that sweeps the full current range sees a window set by the load regulation rather than by the 1 percent initial accuracy.
The SOT-23 body keeps the thermal picture manageable. At 181.9 C per W, 200 mA from 3.3 V to 1.8 V is 0.3 W and a 55 degree rise, and from 2.5 V it is 0.14 W and a 25 degree rise. The part is also the hand placeable option in this family, which matters for prototypes, low volume builds and repair, where a 1 mm X2SON cannot be reworked with an iron.
Buyer questions on this order code
Is 200 nA enough for a ten year battery life? Two hundred nanoamps is 17.5 milliamp hours over ten years, which is small against a coin cell. The regulator is rarely the limiting term at that level, and the load leakage usually dominates the budget.
What input does 200 mA need at 1.8 V? 2.25 V over the full temperature range, because the dropout is 450 mV maximum in this band. From a 2.5 V bus there is 250 mV of margin, and from 3.3 V the margin is comfortable.
Does the part discharge the output when disabled? Yes, there is a 60 Ohm pulldown on the output and a 500 kOhm smart pulldown on the enable pin, so a floating enable does not turn the rail on and the output does not hold charge after shutdown.
Sourcing the TPS7A0318PDBVR through SUPERB
SUPERB quotes this order code in the SOT-23 body with the marking, the finish and the moisture class stated, and verifies the 21VF marking on receipt against the reel label and the certificate of conformance.
Where the sleep budget needs the 25 nA branch instead, the power management cross reference page lists both families, and vendor consolidation covers buying both rails from one source. Send the rails and the annual quantity and the quote follows.