Contact Us

TPS22964C2YZPR

Brand: Texas Instruments
Texas Instruments TPS22964C2YZPR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS22964C2YZPR — Power Management & Signal Chain | Superb Automation

TPS22964C2YZPR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS22964C2YZPR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS22964C2YZPR 3 A load switch with 13 mOhm on resistance, reverse current protection and quick output discharge in WCSP

The TPS22964C2YZPR is a 3 A load switch from the TPS2296xC family in a six bump wafer level package, with an on resistance of 13 mOhm at 5 V, reverse current protection while the switch is disabled, and the quick output discharge that separates the 64 member from the 63. The part is built for a rail that carries real current and still has to be switched, which is the case on a solid state drive, a notebook rail or a USB port that can deliver more than an amp.

The pass element is an N channel MOSFET with an internal charge pump, so the 8 mOhm die is biased well above the input and the resistance stays flat across the range: 13 mOhm at 5 V, 14 mOhm at 3.3 V and 18 mOhm at 1.8 V. The switch turns on with a controlled slew rate to keep inrush within what the upstream supply can deliver, and the reverse current circuit blocks the output from feeding the input whenever the switch is disabled, which is the state a rail is in when a product is off and an accessory is still connected.

Key parameters taken from the TPS22964C2YZPR document

Input range1 V to 5.5 V
Maximum continuous current3 A
On resistance at 5 V13 mOhm typical, from an internal pass FET of 8 mOhm
On resistance at 3.3 V14 mOhm typical
On resistance at 1.8 V18 mOhm typical, and 28 mOhm maximum at 2.5 V in the electrical table
Quiescent current57 microamp typical and 82 microamp maximum at 5 V
Shutdown current760 nA, which is the figure the vendor puts on the front page
Reverse currentBlocked while the switch is disabled, with the leakage printed as 50 nA at 1.8 V
Quick output dischargeFitted on the TPS22964 members and not on the TPS22963, which is the only functional difference between the two
Turn onControlled slew rate inside the part, with the rise time published against load and capacitor in the switching table
Enable thresholdA 1.3 V control input threshold, so a 1.8 V GPIO drives it directly
Body and packingDSBGA YZP 6 bumps, 0.9 by 1.4 mm, 0.5 mm pitch, 6000 pieces on a jumbo reel for this order code and 3000 on a large reel for the sibling row, SNAGCU bumps, moisture level 1, minus 40 to plus 85 C, marking DK
ESD2 kV human body model and 500 V charged device model

The table above is read from the vendor document, not from a distributor summary. Where a window is printed, the window is what a production test should use, and the typical value is only a starting point for the first article.

Where the numbers matter in a real build

The on resistance is low enough that the current rating becomes a packaging question rather than an electrical one. At 3 A through 13 mOhm the dissipation is 117 mW, which the six bump body can hold with the copper the land pattern provides, and at 28 mOhm in the worst case it is 252 mW. That is the difference between a part that runs warm and one that runs hot, and it is decided by the input voltage, because the resistance rises as the rail falls. A 1.8 V rail at 3 A is 252 mW in the worst case and needs the plane the land pattern assumes.

Reverse current protection is only active when the switch is disabled, which is the opposite of the family that keeps it on all the time. For this part the condition it protects against is a rail that is off while an accessory or another supply holds the output up, which is the state a notebook is in when a dock is connected to a sleeping machine. A board that needs blocking while the switch is on has to use the always on family, and the difference in behaviour should be checked before a part is dropped into an existing socket.

The 760 nA shutdown current is the number to use for the off state budget, and it is small enough that the leakage of the load usually dominates. The 57 microamp quiescent current with the switch on is a different matter: a rail that carries 3 A can afford it, and a rail that carries 30 mA cannot. That is the split in this family, and it is why the low current products use the nanoamp switches while the high current ones accept microamps.

The order code on this page carries a C2 and a jumbo reel, which is worth a note because the packaging tables in the document list several rows for the same die. The addendum prints this exact string against a six bump YZP body on a 6000 piece jumbo reel, with a sibling row at 3000 pieces on a large reel and the marking DK on both. A production order should name the reel size rather than assume the usual 3000, because the jumbo reel is the row the vendor publishes for this code.

  • The reel size, because this code is published on a 6000 piece jumbo reel rather than the usual 3000.
  • The on resistance at the lowest input, since 28 mOhm maximum at 2.5 V is the number that decides the dissipation.
  • Reverse blocking only while disabled, which does not cover a back feed with the switch on.
  • The controlled rise time against the load capacitance, since there is no external ramp pin.
  • The shutdown current of 760 nA in the off state budget, which is small but real.
  • The land pattern and copper area, because a six bump package has no pad to spread heat.

Which projects this part fits

This part fits solid state drives and notebook rails that have to be switched at multi amp currents, USB ports that deliver more than an amp, docking connectors where a sleeping machine can be back fed, and any board where 13 mOhm is worth paying for in a package under 1.5 mm. The quick output discharge makes it the member to choose when the rail has to collapse before the next power up rather than float down through the load.

Questions that come up before a purchase order is released

What is the difference between the 63 and the 64 member?

The quick output discharge. The 64 pulls the output down when the switch opens, the 63 leaves it floating. Every other electrical parameter is the same, which is why the two are interchangeable on a board that does not care about the discharge.

Does reverse blocking work with the switch on?

No. The reverse current circuit is active while the switch is disabled, which is the condition it is specified for. A rail that can be back fed while the switch is on needs a different part, and the family that keeps the comparator always on is the one to look at.

Why does the order code show a jumbo reel?

Because the vendor publishes this exact string on a 6000 piece jumbo reel, with a sibling row at 3000. The die and the body are the same. A purchase order that needs a standard reel should name the sibling code rather than assume the reel size follows the suffix.

Is a 1.3 V control threshold enough for a 1.2 V GPIO?

No, the threshold is a minimum turn on level and a 1.2 V driver sits below it. A 1.8 V or higher GPIO drives the pin directly, and a lower rail needs a level shift or a pull up to the higher rail with an open drain driver.

How much capacitance can the switch charge?

The rise time is controlled inside the part, so the inrush is bounded by that ramp rather than by the capacitor. A large output capacitor lengthens the charge but does not produce a current spike, and the limit is the thermal energy in the pass FET during the ramp rather than the capacitor value itself.

How SUPERB handles this line

We supply the TPS22964C2YZPR on original reels with the reel size and date code recorded, and we can supply the 63 member or the large reel sibling when a build does not need the discharge or the jumbo packing. The power management cross reference page lists the high current switches by resistance and current, BOM shortage recovery covers the case where a wafer level body is short and a leaded alternative has to be qualified, and kitting service is how we deliver these parts against a storage or notebook build.