Contact Us

VNH3SP30TR-E

Brand: ST
VNH3SP30TR-E is a motor driver IC from STMicroelectronics, designed for drone motor control, ESC gate drivers, and robotic actuator control. Superb Automation supplies genuine VNH3SP30TR-E with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

VNH3SP30TR-E — Integrated Motor Driver / Smart Power Switch by STMicroelectronics

The VNH3SP30TR-E is an STMicroelectronics integrated motor driver / smart power switch in MultiPowerSO-30 for automotive and industrial actuator control applications.

Part Number Decoded — Field by Field

FieldValueMeaning
VNH3SP30TR-EFull Part NumberSTMicroelectronics Motor Driver / Power Switch

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberVNH3SP30TR-E
PackageMultiPowerSO-30
TypeIntegrated Motor Driver / Smart Power Switch
QualificationAutomotive AEC-Q100 / Industrial

Product Overview

The VNH3SP30TR-E is an STMicroelectronics integrated motor driver / smart power switch in MultiPowerSO-30 package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.

Key Features & Benefits

VIPower Monolithic Integration — Power + Control in One Package

ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.

Comprehensive Protection & Diagnostics

Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.

Automotive-Grade Robustness

Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.

Target Applications

Drone Payload & Actuator Control

Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.

Automotive Body & Powertrain

Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.

Industrial Automation & Robotics

Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.

Frequently Asked Questions

What protection features does the VNH3SP30TR-E include?

The VNH3SP30TR-E features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.

Is external current sensing required?

No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics VNH3SP30TR-E with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

VNH3SP30TR-E: a 30 A bridge with a 45 milliohm leg

VNH3SP30TR-E is an automotive full bridge motor driver in the MultiPowerSO-30 body, on tape and reel. The high side switches are built on the VIPower M0-3 process and the low side switches on the STripFET process, all three dice in one package on isolated lead frames. The leg resistance is 45 milliohm maximum, the output current rating is 30 A and the supply ceiling is 40 V, with PWM operation up to 10 kHz.

The difference from the 18 milliohm bridge in the same package is the logic interface and the switching ceiling. This part takes 5 V logic levels directly, uses a linear current limiter on the low side, and stops at 10 kHz. It is the older member of the family and it is still used where the controller is a 5 V device and the motor does not need a fast PWM.

Figures come from the VNH3SP30-E data sheet read this round, which prints 45 milliohm maximum per leg, 30 A, 40 V maximum supply and PWM up to 10 kHz.

The operating window

FunctionAutomotive full bridge motor driver, two high side and two low side switches
On resistance45 milliohm maximum per leg
Output current30 A
Maximum supply40 V
PWMUp to 10 kHz
Logic levels5 V logic compatible inputs
Current limitingLinear current limiter
DiagnosticsDIAGA and DIAGB digital feedback through the enable pins
ProtectionsUndervoltage and overvoltage shutdown, thermal shutdown, cross conduction lockout, overvoltage clamp
Supply faults coveredLoss of ground and loss of supply
StandbyVery low standby power consumption
PackageMultiPowerSO-30, ECOPACK
QualificationAEC-Q100

Conduction loss at 45 milliohm

At 45 milliohm, 10 A costs 4.5 W per leg and 20 A costs 18 W per leg, with two legs conducting while the bridge drives. At the 30 A rating the figure is 40.5 W per leg, which is a pulse number rather than a running one. The package and the copper decide the continuous current, and the exposed die pads in the MultiPowerSO-30 body are what make a 10 A to 15 A continuous load realistic.

Compared with the 18 milliohm bridge, the loss at the same current is two and a half times higher. That is the arithmetic that decides between the two strings when a customer asks for a drop in replacement, and it is why the lower resistance part costs more.

The 10 kHz ceiling and the linear limiter

PWM at 10 kHz suits a brushed motor driven through a gearbox, where the electrical time constant smooths the current and the audible noise is acceptable. Above that frequency the switching loss rises and the charge pump has less time to refresh the high side gate, so a 20 kHz requirement moves the build to a different string in the same family.

The linear current limiter on the low side behaves differently from the cycle by cycle limiter on the newer parts. It holds the current at the limit while the channel heats, and it relies on thermal shutdown to end an event that does not clear. For a stall test that is acceptable; for a load that stalls repeatedly in service the thermal cycling is the life limiting factor.

Supply and support

Seat, window, wiper and mirror motors, plus pump and actuator loads in body modules, are the usual applications. The 5 V logic interface is the reason it is still built into modules that carry an older microcontroller alongside newer parts.

Our power management cross reference page lists the two bridge resistances side by side, the PCBA test coverage strategy page describes how we plan a motor output test including the diagnostic pins, and the component lead time solutions page covers what we do when the reel is not on the shelf.

Three questions buyers ask about this string

Is 45 milliohm a maximum or a typical figure? It is the maximum per leg in the type table, which makes it a conservative number for loss arithmetic.

Can it run at 20 kHz? No. The data sheet ceiling is 10 kHz, and the newer bridge in the same package reaches 20 kHz.

Does it need external freewheel diodes? No. The bridge switches carry the freewheel path, and the clamp holds the inductive kick inside the supply window.