Contact Us

VND7E025AJTR

Brand: ST
VND7E025AJTR is a motor driver IC from STMicroelectronics, designed for drone motor control, ESC gate drivers, and robotic actuator control. Superb Automation supplies genuine VND7E025AJTR with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

VND7E025AJTR — Integrated Motor Driver / Smart Power Switch by STMicroelectronics

The VND7E025AJTR is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-16 for automotive and industrial actuator control applications.

Part Number Decoded — Field by Field

FieldValueMeaning
VND7E025AJTRFull Part NumberSTMicroelectronics Motor Driver / Power Switch

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberVND7E025AJTR
PackagePowerSSO-16
TypeIntegrated Motor Driver / Smart Power Switch
QualificationAutomotive AEC-Q100 / Industrial

Product Overview

The VND7E025AJTR is an STMicroelectronics integrated motor driver / smart power switch in PowerSSO-16 package. Featuring ST's VIPower technology with monolithic integration of power MOSFETs, gate drivers, and protection/diagnostic circuitry, it simplifies motor control and high-side/low-side switching designs with reduced BOM count and enhanced reliability.

Key Features & Benefits

VIPower Monolithic Integration — Power + Control in One Package

ST's VIPower technology integrates N-channel power MOSFETs, gate drivers, charge pump, and comprehensive protection circuitry on a single die — eliminating external MOSFETs, bootstrap diodes, and sense resistors.

Comprehensive Protection & Diagnostics

Built-in overcurrent, overtemperature (thermal shutdown), undervoltage lockout, and load-dump protection with diagnostic feedback (current sense output, fault status flag) enables self-protecting designs suitable for safety-critical and autonomous systems.

Automotive-Grade Robustness

Designed to withstand harsh automotive and industrial environments including load dump, reverse battery, and extended temperature range for reliable operation in drone payload systems, robotics, and vehicle applications.

Target Applications

Drone Payload & Actuator Control

Drives brushed DC motors, solenoids, and resistive/inductive loads in drone gimbal systems, payload release mechanisms, landing gear actuators, and auxiliary power switching.

Automotive Body & Powertrain

Targets automotive applications including throttle control, EGR valves, HVAC actuators, mirror folding, headlamp leveling, and relay/lamp drivers — all requiring AEC-Q100 qualification.

Industrial Automation & Robotics

Powers motor control, valve actuation, and power distribution in industrial robots, conveyor systems, automated guided vehicles (AGVs), and factory automation equipment.

Frequently Asked Questions

What protection features does the VND7E025AJTR include?

The VND7E025AJTR features overcurrent protection, overtemperature shutdown, undervoltage lockout, and diagnostic feedback — ensuring robust, self-protecting operation in demanding environments.

Is external current sensing required?

No. The integrated current-sense output provides proportional load current feedback, eliminating the need for external shunt resistors and differential amplifiers.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics VND7E025AJTR with full traceability and batch-level QA documentation. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

VND7E025AJTR: a dual high side driver with analog current feedback

VND7E025AJTR is a double channel smart high side driver in the PowerSSO-16 body, supplied on tape and reel. It switches two loads from the positive rail and reports the current in each of them through an analog feedback pin that mirrors the load current with a defined ratio. The die is built on the ST VIPower process, with the protection and the diagnostic blocks on the same silicon as the power stages.

The part belongs to the family built for deep cold cranking, where the battery falls well below the nominal 12 V while the engine turns. That is the reason to read the operating window from the data sheet rather than from the headline voltage in a catalogue line, and the figures in the table come from the vendor document for this order code.

The published figures

FunctionDouble channel smart high side driver with CurrentSense feedback
PackagePowerSSO-16
PackingTape and reel, TR suffix
Logic compatibility3 V and 5 V CMOS outputs
Standby currentVery low, stated in the electrical table for the off state
Current feedbackAnalog mirror of the load current, proportional and specified for accuracy
Fault signallingOverload and short to ground through power limitation
ThermalThermal shutdown with indication on the feedback path
Open loadDetection in the off state
Output faultShort to the supply rail detection
Application focusDeep cold cranking in automotive supply networks

Why the current mirror changes the board

A driver without feedback tells the controller only that it was commanded on. This part tells the controller how much current the load took, which is what allows a body control module to detect a stalled motor, a lamp that has failed open or a harness that is drawing more than its rating. The mirror is a current output, so the sense resistor to ground sets the volts per amp that the converter reads, and the tolerance of that resistor lands directly in the measurement.

Two practical points follow. First, the feedback path needs a filter capacitor close to the converter pin, because the mirror carries switching edges and a long trace turns them into a false overcurrent event. Second, the same pin also reports fault states, so the controller has to distinguish a current reading from a thermal or short flag by the mode it has commanded, not by the voltage alone. Our power management cross reference page records how we compare these feedback schemes across families before we propose a substitute.

Thermal reality at the rated current

The PowerSSO-16 body removes heat through the exposed pad, so the copper under the part is part of the current rating. Two channels driving lamps at a few amps each dissipate in the on resistance and in the switching edges, and a sealed enclosure at 85 degrees C ambient leaves little margin. The thermal calculation is worth doing before the copper is frozen, because a pad that looks generous on a two layer board can still be the limiting element once the board sits in a plastic housing.

The cold cranking requirement also affects the supply filter. During a crank the input falls sharply and recovers with a burst of transients, and the driver has to stay in a defined state through that window rather than resetting the module. A bulk capacitor sized for the module, not for the driver alone, is the usual answer. Our component traceability report records the lot and date code of every reel we ship so a field return can be traced to a build window.

Ordering and replacement questions

Is the TR suffix a different part? No, it is the tape and reel packing on the same die and the same body. Does the part need a charge pump for the high side gate? No, the gate drive is generated internally, which is why the logic pins accept 3 V and 5 V CMOS levels directly.

Can another member of the family replace it on an existing board? Only after the feedback ratio and the protection thresholds are compared, because the pinout is shared but the diagnostics are not identical across the family. The pin to pin cross reference page sets out the fields we check before we will call a part a drop in replacement, and we will not call one on the strength of the pin count alone.