Contact Us

L6206PD013TR

Brand: ST
L6206PD013TR is a motor driver IC from STMicroelectronics, designed for drone motor control, ESC gate drivers, and robotic actuator control. Superb Automation supplies genuine L6206PD013TR with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

L6206PD013TR — Power MOSFET / Motor Driver by STMicroelectronics

The L6206PD013TR is an STMicroelectronics power mosfet / motor driver in PowerSO-36. Supplied by SUPERB Automation with verified sourcing.

Part Number Decoded — Field by Field

FieldValueMeaning
L6206PD013TRFull Part NumberSTMicroelectronics Power MOSFET / Motor Driver

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberL6206PD013TR
PackagePowerSO-36
CategoryPower MOSFET / Motor Driver
QualificationIndustrial / Automotive

Product Overview

The L6206PD013TR is an STMicroelectronics power mosfet / motor driver in PowerSO-36 package. Engineered with ST's proven semiconductor technology and quality manufacturing processes, it delivers reliable performance for a wide range of electronic applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

STMicroelectronics Quality & Reliability

Backed by ST's rigorous qualification testing, statistical process control, and decades of semiconductor manufacturing excellence — ensuring consistent, reliable performance across production batches.

Industrial Temperature Range

Designed for reliable operation across industrial temperature ranges, suitable for outdoor, automotive, and factory-floor environments where temperature extremes challenge lesser components.

Global Availability via SUPERB Automation

SUPERB Automation maintains verified supply channels for genuine STMicroelectronics components, with competitive pricing and lead times from prototype quantities to full production volumes.

Target Applications

Embedded & IoT Systems

Integrates into microcontroller-based designs, sensor interfaces, and IoT endpoints requiring reliable electronic components from a trusted manufacturer.

Industrial Control & Automation

Suitable for industrial PLCs, motor drives, sensor transmitters, and factory automation equipment demanding components with proven field reliability.

Consumer & Automotive Electronics

Used in consumer devices, automotive subsystems, and general electronic designs benefiting from ST's broad product portfolio and manufacturing scale.

Frequently Asked Questions

Where can I find the datasheet for L6206PD013TR?

The official datasheet is available on STMicroelectronics' website (st.com). SUPERB Automation can also provide documentation and application support upon request.

Is this part in stock and available?

SUPERB Automation supplies genuine STMicroelectronics L6206PD013TR through verified sourcing channels. Contact us with your target quantity and timeline for current availability and pricing.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes with flexible packaging options (tray, cut tape, or full reel).

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics L6206PD013TR with full traceability and batch-level QA documentation. Whether you need prototype quantities or production volumes, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

L6206PD013TR: a DMOS dual full bridge from 8 V to 52 V in PowerSO36

L6206PD013TR is a dual full bridge motor driver from STMicroelectronics in the PowerSO36 body, tape and reel. It runs from 8 V to 52 V, delivers 5.6 A peak and 2.8 A DC per bridge, has a typical on resistance of 0.3 ohms at 25 degrees junction, and switches up to 100 kHz. The output stage is DMOS with integrated fast freewheeling diodes, so the four diodes per bridge that a discrete build needs are already inside.

The part is built in BCD technology, which puts the DMOS power devices and the control circuits on one chip, and it carries a non dissipative overcurrent detection on the high side devices plus a diagnostic output. That combination is what allows a two axis stepper or a pair of DC motors to be driven from one body with a fault line back to the controller instead of a current sense resistor on every leg.

Vendor figures for this code

FunctionDual full bridge DMOS motor driver
Supply voltage8 V to 52 V
Output current5.6 A peak, 2.8 A DC per bridge
On resistance0.3 ohms typical at 25 degrees junction
Switching frequencyUp to 100 kHz
Freewheeling diodesIntegrated, fast recovery
Overcurrent protectionProgrammable high side detection, non dissipative
Other protectionsThermal shutdown, undervoltage lockout
DiagnosticOpen drain output for the overcurrent condition
PackagesPowerSO36 and SO24
Package on this codePowerSO36, tape and reel
Named applicationsBipolar stepper motors, dual or quad DC motors

Working the dissipation on a stepper

A bipolar stepper driven at 1.5 A per phase has two phases energised at any time, so the bridge carries 3 A in total and dissipates 3 squared times 0.3, which is 2.7 W. On a PowerSO36 with an exposed pad soldered to a copper area that is a rise of maybe 40 degrees above ambient, which is workable. At the 2.8 A DC limit per bridge the arithmetic gives 2.35 W per bridge and 4.7 W for the pair, and that is where the package and the copper have to be treated as one thermal object.

The 100 kHz switching ceiling is generous for a stepper, which usually runs at 20 to 40 kHz, and it matters for a DC motor driven by pulse width modulation where the audible band has to be avoided. A build that switches above 100 kHz needs a different family, and a build that switches at 20 kHz can use this part with a comfortable margin.

Use, and the related pages

Typical loads are stepper axes on a laboratory instrument, dual DC motors on an automation module, and quad DC motors where two parts are stacked. Related pages are power management cross reference, pin to pin cross reference for the L6205 and L6207 members of the same family, and one stop BOM sourcing.

Questions buyers ask on this code

Whether the 2.8 A DC figure applies to both bridges at once is the first, and it does in the sense that each bridge has its own limit, while the package has one thermal limit that the two together will reach first. The second is the difference between this part and the L6205 and L6207 members, which is the protection set rather than the output stage. The third is the exposed pad, which on a PowerSO36 has to be soldered to a plane with vias, because the thermal path is the only thing between a 2.7 W load and a thermal shutdown.