MSP430F133IPM
Product Specifications
MSP430F133IPM
Texas Instruments — Power Management & Signal Chain
Product Overview
The MSP430F133IPM from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-efficiency power conversion with low quiescent current
- Wide input voltage range with precision output regulation
- Integrated over-current, over-temperature, and short-circuit protection
- Small footprint packaging for space-constrained designs
- AEC-Q100 qualified options available for automotive applications
- Flexible sequencing and soft-start control
Key Specifications
| Input Voltage | V |
| Output Voltage | V |
| Output Current | A |
| Switching Frequency | kHz |
| Efficiency | % |
| Quiescent Current | µA |
| Topology | — |
| Package | — |
| Operating Temp | °C |
| Protection | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
MSP430F133IPM: 16 bit microcontroller with 8 KB flash, a 12 bit ADC and 48 I/O in a 64-pin LQFP
MSP430F133IPM is a 16 bit RISC microcontroller with a 12 bit analog to digital converter, two 16 bit timers and 48 I/O pins in a LQFP body of 64 pins. The F133 sits in the F13x family, which adds a 12 bit converter with an internal reference, sample and hold and an autoscan mode to the core used in the x12x parts. This code carries 8 KB of main flash plus 256 bytes of information memory, 256 bytes of RAM, one USART, Timer_A3 and Timer_B7 with shadow registers, and 48 I/O pins in the 64-pin PM body. Active current is 280 microamps at 1 MHz from 2.2 V.
Order code and package
| Order code | MSP430F133IPM |
| Function | 16 bit RISC microcontroller with a 12 bit ADC |
| Package | LQFP, 64 pins, body code PM |
| Flash | 8 KB plus 256 bytes of information memory |
| RAM | 256 bytes |
| Supply range | 1.8 V to 3.6 V |
| ADC | 12 bit with internal reference, sample and hold and autoscan |
| Timers | Timer_A3 and Timer_B7 with shadow registers |
| Serial | one USART, UART or SPI |
| I/O | 48 pins across six ports |
| Multiplier | 16 by 16 hardware multiplier |
| Datasheet | SLAS272, F13x and F14x family document |
Electrical parameters that decide the application
| Active current | 280 microamps at 1 MHz from 2.2 V |
| Standby current | 1.6 microamps |
| Off current | 0.1 microamps with RAM retained |
| Wake up time | under 6 microseconds |
| Instruction cycle | 125 nanoseconds at 8 MHz |
| ADC resolution | 12 bit, with an internal reference and eight external channels plus internal channels |
| Timer_B | seven capture and compare registers with shadow registers |
| Timer_A | three capture and compare registers |
| Low power modes | five |
| Comparator | on chip comparator with a reference ladder |
Points to check before this part goes on a BOM
Two timers with different widths of capability is the reason this family fits motor control. Timer_B has seven compare registers and shadow registers, so a three phase PWM pattern can be updated at a zero crossing without tearing, while Timer_A handles the capture of an encoder or a tachometer input at the same time.
The 12 bit converter has an autoscan mode that walks a sequence of channels without CPU involvement. With eight external channels and an internal temperature sensor, the sequence is set once at start up and the results land in memory through the transfer controller, which is what keeps the 280 microamp active current meaningful.
256 bytes of RAM is the hard limit in this code. A 12 bit converter filling a buffer of 64 samples already uses 128 bytes, so a board that needs a filter over a longer window has to move up to the F135 with 512 bytes or process each sample as it arrives.
The supply range starts at 1.8 V, but the converter and the flash need more than the core does. The internal reference has its own minimum supply, so a board running from two cells near end of life has to check the converter specification at its actual rail rather than at the core minimum.
48 I/O in a 64-pin body leaves room for a display, a keypad and a serial port without an external expander, and every port on this family is bit addressable with interrupt capability on ports 1 and 2. Analog function pins are shared with port 6, so the channel count and the digital pin count trade against each other.
The hardware multiplier is a 16 by 16 block that completes in a few cycles and makes fixed point filtering practical on a core without a floating point unit. A moving average or a biquad section at 1 kHz occupies a small fraction of the 8 MHz budget, which is how this part runs a control loop and a display at the same time.
Where this order code fits
Industrial instruments that scan several analog channels, motor and valve controls with current feedback, and portable medical monitors use this family, because the converter and the timers sit on the same die as the core and no external multiplexer is needed for eight channels. Boards comparing it with a neighbouring part start from our MCU Cross Reference page, and boards replacing a part that has gone end of life start from the ADC DAC Cross Reference page.
Questions buyers ask
How many analog channels does this part scan? Eight external channels plus internal channels for temperature and supply, through a 12 bit converter with autoscan. The pins are shared with port 6.
Is the F133 the same as the F135? No. This code has 8 KB of flash and 256 bytes of RAM, the F135 has 16 KB and 512 bytes, and the peripherals are otherwise the same in the same 64-pin body.
Can it run a three phase motor control loop? Yes, at moderate switching frequencies. Timer_B with seven compare registers and shadow registers generates the PWM, Timer_A captures the feedback, and the 8 MHz core leaves room at 1 kHz to 20 kHz loops.
SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Component Lead Time Solutions page sets out the checks that keep a substitute from failing on the bench.