Contact Us

LD1117S33CTR

Brand: ST
LD1117S33CTR is a linear voltage regulator from STMicroelectronics, designed for drone power distribution boards, BEC circuits, and battery voltage regulation. Superb Automation supplies genuine LD1117S33CTR with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

LD1117S33CTR — Voltage Regulator by STMicroelectronics

The LD1117S33CTR is an STMicroelectronics voltage regulator in SOT-223 for reliable power management in embedded and industrial applications.

Part Number Decoded — Field by Field

FieldValueMeaning
LD1117S33CTRFull Part NumberSTMicroelectronics Voltage Regulator

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberLD1117S33CTR
PackageSOT-223
TypeFixed/Adjustable Voltage Regulator
QualificationIndustrial (-40°C to +125°C)

Product Overview

The LD1117S33CTR is an STMicroelectronics voltage regulator in SOT-223 package, providing reliable, stable output voltage for embedded systems, IoT devices, and industrial applications.

Key Features & Benefits

Stable Output with Built-in Protection

Features internal thermal shutdown, current limiting, and safe operating area (SOA) protection — ensuring reliable output regulation even under fault conditions, short circuits, and high ambient temperatures typical in enclosed electronics.

Wide Compatibility & Minimal External Components

Requires only input and output capacitors for stable operation, minimizing BOM count and PCB area. Compatible with ceramic, tantalum, and electrolytic output capacitors for design flexibility.

Industrial Temperature Range

Rated for −40°C to +125°C junction temperature, suitable for outdoor drone applications, automotive under-hood electronics, and industrial control systems exposed to wide thermal swings.

Target Applications

Drone & Embedded System Power Rails

Provides regulated voltage for MCU core/IO supplies, sensor analog references, and communication module power in drone flight controllers, IoT nodes, and portable electronics.

Industrial & Automotive Electronics

Widely used in PLCs, sensor transmitters, motor control boards, and automotive ECUs where a robust, well-protected voltage regulator is essential for system reliability.

General-Purpose Point-of-Load Regulation

Serves as a simple, cost-effective point-of-load regulator for powering individual ICs, analog circuits, and mixed-signal subsystems from higher-voltage system rails.

Frequently Asked Questions

What is the output voltage of the LD1117S33CTR?

Check the specific variant. The LD1117S33CTR is available in multiple fixed output voltages (typically 3.3V, 5V, 12V) or as an adjustable version. Refer to the datasheet for exact specifications.

What capacitors are needed for stability?

Typically 0.33µF on input and 0.1µF on output minimum. For optimal transient response, 10µF output capacitance is recommended. Refer to the datasheet for ESR stability requirements if using ceramic capacitors.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype to full production volumes with competitive lead times.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics LD1117S33CTR with full traceability. Contact us with your target quantity — we'll respond with a quotation within 24 hours.

LD1117S33CTR: the second 3.3 V SOT-223 code in the LD1117 order table

LD1117S33CTR is one of the two 3.3 V fixed codes that STMicroelectronics prints in the SOT-223 column of the LD1117 order table, the other being LD1117S33TR. Both are 800 mA low dropout regulators in the same body, both use the 1.25 V internal reference through an NPN pass element, and both carry the 1 percent at 25 degrees and 2 percent over temperature figures of the family. The document is DocID2572, revision 38, dated January 2025.

The extra letter in the middle of the code is a grade marker rather than a package change, and the order table does not carry a separate tolerance column for it. That is the practical point for a buyer: the two codes are not interchangeable on a purchase order without naming the grade, and a quotation that treats them as one line item is a quotation that has not read the table. The safe route is to state the code exactly as it appears on the drawing and let the vendor confirm the grade in writing.

What the family guarantees at 3.3 V

Output voltage3.3 V, plus or minus 1 percent at 25 degrees, 2 percent over temperature
Output current800 mA
Dropout voltage1 V typical
Supply voltage rejection75 dB typical
Reference1.25 V internal, shared with the adjustable version
Minimum output capacitor10 microfarads
ProtectionsInternal current limit and thermal limit
Pass elementNPN, low quiescent loss at high current
PackageSOT-223, tape and reel
Thermal noteTab soldered to copper is the only heat path in this body
Other fixed voltages in the family1.2, 1.8, 2.5 and 5.0 V

How the two codes differ in practice

On a board that already runs 3.3 V at a few hundred milliamps, both codes will work, and the reason to prefer one over the other is the tolerance guarantee on the line and not the electrical behaviour. A 1 percent window at 3.3 V is 3.267 to 3.333 V, while a 2 percent window over temperature is 3.234 to 3.366 V. If the rail feeds a DDR interface or a PHY that is specified at plus or minus 3 percent, both pass. If it feeds a reference that expects 0.5 percent, neither does and a different part is needed.

The second practical difference is availability. Two codes in the same table often have two different stock positions, and an allocation on one does not automatically mean the other is also short. That is worth checking before a build is re-planned, because the substitution may be a paperwork step rather than an engineering change.

Use, and the related pages

These parts land on 3.3 V logic, memory and module rails, and behind a 5 V intermediate supply in telecom and medical equipment. Related pages are power management cross reference, pin to pin cross reference, and component lead time solutions for the case where one of the two codes is on allocation.

Questions buyers ask on this code

The first is whether this code can be shipped in place of the S33TR code, and the honest answer is that it depends on the tolerance grade written on the drawing, which is why the confirmation belongs in writing. The second is the output capacitor, which is a stability requirement at 10 microfarads and not a suggestion. The third is the thermal path, because a SOT-223 at 800 mA with 1.6 V of headroom is dissipating 1.28 W and the tab is the only way that heat leaves the part.